CF-2141; Single-channel external CIB bus master, communication with CP-Ethernet

The C-RF-0001M-A peripheral module is the communication interface between the CFox bus and the RFox2 wireless network. It is referred to as the CFox MiniMaster. It allows you to connect up to 10 Rfox2 wireless elements to the system.

The C-BS-0001M module is a single-channel CIB bus separator for increasing the current consumption (and thus also the number of modules) on the CIB bus for basic modules (CP-xxxx) with possible current consumption from the CIB up to 100mA. That is, for all CP-xxxx except CP-1000, CP-1001 and CP-2000. It allows the connection of 32 modules up to a maximum current of 1A.

The CF-1141 module is a two-channel CIB master with a separator perimeter. Each channel allows the connection of 32 modules to maximum current 1A. Communication with the basic module takes place via the TCL2 interface.

BDM-024-V / 1-FR1-CIB Lightning current arrester with two-stage overvoltage protection designed for the CIB bus installation at the entrance to the building near the protected equipment, at the interface of zones LPZ 0 – LPZ 1 and higher can also be used to protect the interfaces of control systems MaR, EZS, EPS, etc. against longitudinal overvoltage (line - protective earth) rough protection and against transverse overvoltage (core - core, GND) rough and fine overvoltage protection...

DTNVEM 1/CIB surge suppressor for 1xCIB, for DIN rail

DTNVE 1 / CIB Surge protection for CIB bus, in the installation box DTNVEM 1 / CIB overvoltage protection is a basic element for protecting your own CIB bus. It only protects against surges that can enter the CIB installation itself. It does not replace the protection of the entire control system. DTNVEM 1 / CIB is a surge protection device (SPD) according to ČSN EN 61643-21 (categories A2, B2, C2, C3, D1) designed to protect the CIB bus against lightning currents and overvoltages. The...