The IB-1301 expansion module is designed for the scanning of up to 12 binary signals 24 V DC with a common pole (minus or plus to way of connection), type 1 according to ČSN EN 61131. The module is equipped with removable screw-type connector. Inputs DI0 to DI3 allow to carry out a special functions conform to inputs on CP-1004 basic module. The inputs are galvanically isolated from the internal circuits (including power supply and communication) and groups of inputs are separated one from...

The IB-1301 expansion module is designed for the scanning of up to 12 binary signals 24 V DC with a common pole (minus or plus to way of connection), type 1 according to ČSN EN 61131. The module is equipped with removable screw-type connector. Inputs DI0 to DI3 allow to carry out a special functions conform to inputs on CP-1004 basic module. The inputs are galvanically isolated from the internal circuits (including power supply and communication) and groups of inputs are separated one from...

The IR-1501 expansion module is designed for reading up to 4 binary 24 V DC signals with a common terminal (according to the minus or plus connection), type 1 according to ČSN EN 61131. The module contains 8 relay outputs with a switching contact and a common terminal. The module is equipped with removable screw connectors. Inputs DI0 ÷ DI3 allow to implement special functions identical to inputs DI0-DI3 of basic module CP-1004. The relay outputs can switch max. 230 V AC, 3 A (current...

IT-1604 - expansion module contains 8 analog inputs with common terminal and 2 analog outputs with common terminal. The inputs are universal, independently configurable as voltage, current and for two-wire connection of passive resistance sensors. The resolution is 16 bits. The module provides processing of the measured value, conversion to engineering units, etc. The analog outputs are voltage 0 ÷ 10 V with a resolution of 8 bits. The analog inputs and outputs are galvanically isolated from...

The expansion module IT-1605 contains 8 analog differencial inputs and 2 analog outputs with a common terminal. The inputs are universal, independently configurable as voltage inputs for low voltage or for the measuring of thermocouples. The resolution of inputs is 16 bits. The module ensures the measuring and the conversion of the measured value to the engineering units. Voltage analog outputs can be used in the range from -10 V to +10 V and the resolution is 10 bits. The inputs and outputs...

The OT-1651 expansion module contains 4 analog unipolar outputs. Either voltage or current output can be used. Loads of both types are connected to the ground. The resolution is 12 bits, the value can be set as a percentage of the maximum value, engineering unit or fulscale (0-30000). The analog outputs are galvanically separated from the input voltage of the processor part, TCL2 communication and internal circuits. They have a separate power supply. The status of the current loop is...

The IC-1701 expansion module contains 8 fast binary inputs with adjustable decision level and 4 fast transistor outputs usable as PWM outputs or for controlling up to 2 stepper motors. All inputs and outputs as well as individual groups are galvanically separated from the input voltage and TCL2 communication, and the status of each input is signaled on the module panel. The module is equipped with removable screw connectors.