The MeteoLib library contains a block for communication with the IQWS-4000 weather station. The MeteoLib library is supported on all Foxtrot systems and is supplied as standard as part of the Mosaic programming environment. The library does not require an application profile (it is free to use).

The SatelLib library contains functional blocks enabling communication with the INTEGRA, INTEGRA Plus and VERSA security systems via the ETHM-1 Plus communication module supplied by Satel.

MQTT is a data transmission protocol in IP networks. It is designed as a basically simple and open protocol. It is an ideal choice in many situations, especially for Machine to Machine (M2M) and Internet of Things (IoT) communication. The protocol uses TCP / IP or other protocols as appropriate.

YeelightLedLib offers the ability to control and monitor Yeelight LED WiFi bulbs via LAN / WiFi interface. Before you start using YeelightLedLib, you need to set up your Yeelight device using a special "Yeelight" mobile application that can be downloaded on both Android and IOS.

The standard library STDLib contains function blocks of counters CTD, CTU and CTUD, timers TON, TOF and TP, flip-flops RS and SR and function blocks of edge detection R_TRIG and F_TRIG. It also contains functions for working with date and time, functions over a string of characters, data type conversion and arithmetic functions.

The RegoLib.mlb control library contains basic function blocks, which are used mainly for solving control tasks in the Tecomat PLC. However, the number of function blocks in this library finds wide application outside of regulatory tasks.

The FileLib library contains a set of functions needed to work with files. This library can only be used for control systems equipped with a file system. The FileLib library contains basic (low-level) functions for working with files and directories, as well as the necessary data types and constants, and finally function blocks for reading and writing files. Function blocks use basic file functions and decompose readings resp. write files for multiple cycles to optimize the time required for...

Die ModelLib-Bibliothek dient der Modellierung und Simulation von Prozessen, die durch Differentialgleichungen beschrieben werden können. Die Bibliothek bietet folgende Funktionsbausteine      fbIntegrator - Integrator      fbDerivator - Derivator      fbLimIntegrator - Eingeschränkter Integrator      fbDelay - Verzögerung      fbFirstOrder - Filter erster Ordnung      fbSecondOrder - Filter zweiter Ordnung      fbSecondOrderOsc - Schwingfilter zweiter Ordnung...

The RexLib library contains a set of function blocks intended for system control. This library can be used for Foxtrot control systems and Tecomat TC-700 systems with CP-7000, CP-7004 processor unit. The RexLib library contains the following function blocks:     • fbPIDU - basic PID controller     • fbPIDMA - PID controller with autotuner     • fbPSMPC - pulse-step predictive controller     • fbMCU - block for manual entry of values     • fbPWM - pulse width modulation block     •...

The Building.lib library is a library for the Mosaic programming environment. Its content is designed to support the programming of so-called building management applications.

Function libraries and function blocks are an integral part of the Mosaic programming environment installation. In terms of their construction, libraries can be divided into the following types: built-in libraries standard external libraries user-defined libraries The library can contain declarations of functions, function blocks, data types, and global variables. The SysLib library is one of the standard libraries.

Actuators controlled by two binary inputs are often used in heat control, air conditioning and elsewhere. E.g. "Forward" and "Backward". If the actuator has the possibility of feedback, for example by a resistance position transmitter, it can be controlled by a PID controller with a three-state output. In simpler applications without feedback, it is necessary to control the actuator with only two outputs so that the switching time determines the required distance traveled. FB ServoControl...

The ComLib library is supplied as standard as part of the Mosaic programming environment. The library contains functions and function blocks enabling receiving and sending messages via the PLC communication channel. This can be either a serial line or Ethernet.

The ModbusRTUlib library contains declarations of functions, function blocks, data types and global variables for Modbus master communication. The ModbusRTUlib library uses some functions from the ComLib and CrcLib libraries. The library is delivered as a part of the installation of the Mosaic environment from version v 2.0.25.0. ModbusRTUlib library functions and function blocks are supported in K-series central units (TC700 CP-7004 and all Foxtrot system variants) from version v 5.7. and...

The ToStringLib library is supplied as standard as part of the Mosaic programming environment. The library contains conversion functions for converting variables to a string with the option to specify the output format.

The InternetLib library contains a set of functions for working with services available on the Internet. The library can be used with K and L series central unit systems with firmware version 4.9 and higher. The included function blocks implement the translation of domain names into IP addresses, time synchronization with time servers, sending emails via the SMTP protocol and basic HTTP protocol queries.

The FlashLib library is supplied as standard as part of the Mosaic programming environment. The library contains functions and function blocks enabling work with flash memory, which is a standard part of K-series processor units. Flash memory is a non-volatile (semi-permanent) electrically programmable (writable) memory with arbitrary access.

The DebugComLib library contains function blocks for recording communication taking place on channels and connections in UNI mode to the Databox.

The WebGraphLib library contains functions and function blocks that support the display of simple graphs in a web page created with WebMaker.

The iControlLib library contains function blocks usable mainly in smart homes. These blocks are ready for control from the web interface and for easy integration with applications (iFoxtrot, HomeKit, ...). The iControlLib library is supplied as standard as part of the Mosaic programming environment. Mosaic version v2017.1 is required for iControlLib_v20 and higher, iFoxtrot must be version v2.4.1 or higher.

Die DMX512lib-Bibliothek enthält einen Funktionsblock und eine fbDMX512 FB-Datenstruktur, die Kommunikationskanaleinstellungen und Kommunikation durchführt. Der Funktionsbaustein verwendet andere Funktionsbausteine ​​aus der ComLib-Bibliothek. DMX512 ist ein serielles Protokoll zur Steuerung von Lichttechnik wie Dimmern und anderen Spezialeffekten über eine digitale Schnittstelle. Das Protokoll wird seit 1998 von der Entertainment Services and Technology Association (ESTA) gepflegt. Die...

The XmlLib library contains function blocks that allow you to work with data in the Extensible Markup Language (XML) format. Processes data with a general ZML structure: Text XmlLib version 1.3 has the following limitations: - Comments are ignored - The maximum length of a tag, attribute, or tag or attribute content is 80 characters - The maximum number of attributes for one tag is ten - CDATA section is not supported - Wildcard xml entities are not supported

The Iec104sLib library is used for communication of Tecomat systems with the central unit of the K and L series (all Foxtrot systems, TC700 systems with CP-7004 or CP-7007) with superior systems according to the IEC 870-5-104 standard. In this case, the Tecomat system is a slave of the remote control (it works as a server). The library contains the function block fbIEC_60870_5_104_s, which implements everything needed for communication. Communication takes place via TCP / IP protocol with...

The AstroLib library contains functions that allow you to calculate basic data about the position of the Sun at a specified time and a specified coordinate anywhere on Earth. It also provides the time of dawn and dusk on this coordinate - civil, nautical and astronomical ..

The EnergyLib library contains functional blocks enabling reading of data from an electricity meter connected via an opto head or via the RS-485 interface (communication according to the ČSN EN 62056-21 standard) and calculating electricity consumption based on S0 pulses provided by the electricity meter. Furthermore, the library provides the function of the SW calorimeter, ie the calculation of the flow and supplied heat based on the data from the flow meter and the measured inlet and outlet...

The DaliLibEx library contains function blocks for communication of the Foxtrot system (from version v. 5.7. And higher) with DALI ballasts via CIB to DALI bus converter modules. Typically C-DL-0012S and C-DL-0064M. The DALI bus uses a special two-wire serial synchronous protocol according to NEMA Standards Publication 243-2004 Digital Addressable Lighting Interface (DALI) Control Devices Protocol PART 1-2004 and PART 2-2004.

Polohovací moduly slouží pro řízení polohy strojních zařízení pomocí servopohonů (Motion Control) v programovatelných automatech (dále jen PLC) TECOMAT TC700 a Foxtrot. Popis modulů v dokumentaci TXV 004 25. Jednotlivé osy polohovacího modulu mohou pracovat jako zcela nezávislé nebo s různými typy vzájemných závislostí pohybů os. V maximální výstavbě až 3 libovolné osy mohou pracovat ve společné lineární interpolaci a zbývající 3 osy mohou být opět navzájem v lineární interpolaci nebo v jiné...

The DscLib library is intended for communication of Tecomat PLC systems with DSC PowerSeries security control panels (via DSC IT-100 Data Interface Module).