The LG_HVAC_Lib library is intended for communication of Tecomat PLC systems with LG air conditioning systems. The RS-485 interface is used for communication, which is available on the communication modules built into the indoor or outdoor air conditioning unit, depending on on the LG air conditioning model used (see below). LG Air Conditioner must support the LGAP communication protocol. From the Foxtrot PLC side, the serial channel CH2, CH3 or CH4 is used for communication, which...

The CFoxLib library contains functions and function blocks supporting the possibilities of some modules in the CFox network.

The EpsnetLib library contains functions and function blocks enabling communication via the Epsnet protocol in the role of master on the Ethernet interface.

The GalaxyLib library is intended for communication of Tecomat PLC systems with Honeywell's Galaxy security systems. These systems are connected via the GXYSMART module via the RS-232 interface. On the Foxtrot PLC side, the serial channel CH1 (standardly equipped with RS-232 interface) or one of the channels CH2, CH3 or CH4 is used for communication, which must be equipped with a module with RS-232 interface.

The ParadoxLib library is intended for communication of Tecomat PLC systems with Paradox Digiplex EVO security systems. These systems are connected via the APR-PRT3 module via the RS-232 interface. On the Foxtrot PLC side, the serial channel CH1 (standardly equipped with RS-232 interface) or one of the channels CH2, CH3 or CH4 is used for communication, which must be equipped with a module with RS-232 interface.

The InterpolLib library contains functions for interpolating waveforms specified by enumerating point coordinates.

SAMSUNGLib library SAMSUNG air conditioners (outdoor or indoor) connected via RS-485 to any other SAMSUNG control system must use an optional communication module, all depending on the specific SAMSUNG device. To connect SAMSUNG air conditioners (series DVM, CAC, FJM ...) are used communication modules MIM-B04A, MIM-B13A / B, which are part of the outdoor air conditioner, are connected via serial channel CH2 (CH3, CH4) to the control unit. A maximum of 16 outdoor air conditioners and a...

The WeatherLib library is intended for loading weather information from the Internet into Tecomat PLC systems. The WeatherLib library is supplied free of charge, the fbYahooWeather, fbOpenWeatherMap and fbYrWeather blocks may not be used for commercial purposes. Yahoo is free as long as the logo (news-wea.gif) or Yahoo Weather text link is provided where the service is used. Also services with Openweathermap are free, provided that a logo (openweathermap.jpg) or a text link is provided...

The XmlLibEx library contains function blocks that allow you to work with data in the Extensible Markup Language (XML) format. The XmlLibEx library can be used as a replacement for the older XmlLib library. The XmlLibEx code is shorter and runs faster than the original XmlLib library. In addition, as of XmlLibEx_v13, function blocks are available in the library to simplify the processing of XML documents. In the XmlLibEx_v15 version, two more function blocks are added for parsing data from a...

The JsonLibEx library contains function blocks that allow you to work with data in the JavaScript Object Notation (JSON) format. JSON is a textual, language-independent format used for data exchange. For more details on the JSON format, see http://www.json.org/json-cz.html.

The KnxLib library is intended for communication of Tecomat PLC systems with intelligent electrical installations for building control of the KNX system. KNX installations are connected to the PLC via the KNX IP BAOS 772 module (and higher) via the Ethernet interface using the TCP / IP protocol.

The XBMCLib library contains a function block enabling playback of multimedia content on a device with the KODI application installed, including its control and monitoring of the current status.

The ConvertLib library contains functions and function blocks for converting various values, codes and formats - time, wind direction, angle, uppercase letters, font coding ...

The TecoRouteLib library contains functions enabling the setting of parameters for the connection of a PLC system to the TecoRoute service. It is also possible to test the current state of the PLC connection to the service. TecoRoute is a service enabling remote access to the Tecomat PLC from a web browser and the Mosaic programming environment. It is enough for the PLC to be connected to the Internet, a public IP address and no additional hardware (except the router) are needed. This...

The JablotronLib library is intended for communication of Foxtrot PLC systems with Jablotron JA-101K to JA-107K series security systems. These systems are connected via the JA-121T bus interface with an RS-485 interface. On the Foxtrot PLC side, the serial channel CH1, CH2, CH3 or CH4 is used for communication, which must be equipped with a module with RS-485 interface. Furthermore, SC-1101 modules (serial channels CH5 to CH10) can be used for communication. The JablotronLib library requires...

The CoolMasterLib library is intended for communication of Foxtrot PLC systems with air-conditioning systems of various manufacturers via the CoolMaster communication adapter. In this case, Foxtrot can monitor and control up to 32 air conditioning systems via one serial channel with RS-232 interface, to which the CoolMaster communication adapter is connected. The communication protocol is described in the CoolMaster Programmers Reference Manual (PRM). The implementation in the library...

The CanvasLib library contains functions and function blocks enabling the user program in the PLC to draw graphics, which will be displayed on a web page or on the operator panels of the ID-3x series. Unlike static WebMaker objects, graphics drawn in this way can change dynamically.

The CanvasObjectsLib library contains support for working with graphic objects, which are then available via a web server in the PLC. Function blocks in the CanvasObjectsLib library support drawing graphic objects located in a Web page created by WebMaker in Mosaic. The graphic object can be, for example, a line or bar graph, a slider, etc.

The TecnoAlarmLib library contains functions and function blocks enabling communication with TecnoAlarm security and warning systems (via ESP LAN) supplied by Tecno-Alarm.

KlafsSpaLib supports 10 types and models of KlafsSpa system. All Klafs saunas connected to one network are controlled by the "TOUCH CONTROL" panel. To connect KlafsSpa systems via the RS232 interface to a PLC, a special communication converter supplied by KlafsSpa is required. Depending on the model, Klafs control systems offer heating to the required temperature, on / off, status verification and humidity control.

Foxtrot 2 PLC systems include support for Wireguard VPN (see www.wireguard.com), which allows these PLCs to be integrated into a virtual private network. Parameter settings for VPN can be performed from the browser via the web server built into the PLC or from the PLC user program using functions from the WireguardLib library. The Wireguard VPN service can work in the PLC as a server or as a client. The WireguardLib library supports the setting of VPN parameters, where the PLC is in the...