Запасные части Pepperl+Fuchs
Каталожный номер: 71818
| Hazardous area connection |
|---|
| Connection | terminals 1, 2, 3, 4 |
| Safe area connection |
|---|
| Connection | terminals 5, 6, 7, 8 |
| Indicators/settings |
|---|
| Labeling | space for labeling at the front |
| Conformity |
|---|
| Degree of protection | IEC 60529 |
| Ambient conditions |
|---|
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP20 |
| Connection | screw terminals |
| Core cross-section | max. 2 x 2.5 mm2 |
| Mass | approx. 150 g |
| Dimensions | 12.5 x 115 x 110 mm (0.5 x 4.5 x 4.3 inch) |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Каталожный номер: 33208
| Mechanical specifications |
|---|
| Dimensions | 12.5 x 91.5 x 13 mm (0.49 x 3.6 x 0.51 inch) |
| Mounting | DIN rail mounting |
Каталожный номер: 34387
| Mechanical specifications |
|---|
| Material | copper Cu3/10 |
Каталожный номер: 182509
| Описание оборудования |
|---|
| Switch Amplifier |
Каталожный номер: 216713
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 216718
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 96045
| Описание оборудования |
|---|
| 230 V AC |
Каталожный номер: 96046
| Описание оборудования |
|---|
| 230 V AC |
Каталожный номер: 115619
| Описание оборудования |
|---|
| 230 V AC |
Каталожный номер: 115620
| Описание оборудования |
|---|
| 230 V AC |
Каталожный номер: 107948
| General specifications |
|---|
| Signal type | Digital Input |
| Functional safety related parameters |
|---|
| Safety Integrity Level (SIL) | SIL 2 |
| Supply |
|---|
| Connection | terminals 14, 15 |
| Rated voltage | 90 ... 253 V AC , 45 ... 65 Hz |
| Rated current | &le 150 mA |
| Power dissipation | 2.5 W |
| Power consumption | max. 7 W |
| Input |
|---|
| Connection side | field side |
| Connection | Input I: terminals 1+, 2, 3- Input II: terminals 4+, 5, 6- |
| Rated values | 22 ... 24 V DC / 100 mA, see notes |
| NPN sensor | |
| Switching point | 4 ... 13 V |
| PNP sensor | |
| Switching point | 4 ... 13 V |
| Short-circuit current | 110 mA |
| Switching point | 0-signal: < 5 V
1-signal: > 13 V |
| Output |
|---|
| Connection side | control side |
| Connection | output I: terminals 7, 8, 9
output II: terminals 10, 11, 12 |
| Output I, II | |
| Contact loading | 250 V AC / 4 A / cos &phi > 0.7 40 V DC / 2 A resistive load |
| Energized/De-energized delay | max. 6 ms |
| Mechanical life | 107 switching cycles |
| Transfer characteristics |
|---|
| Switching frequency | &le 10 Hz |
| Indicators/settings |
|---|
| Display elements | LEDs |
| Labeling | space for labeling at the front |
| Directive conformity |
|---|
| Electromagnetic compatibility | |
| Directive 2004/108/EC | EN 61326-1:2006 |
| Low voltage | |
| Directive 2006/95/EC | EN 50178:1997 |
| Conformity |
|---|
| Galvanic isolation | EN 50178 |
| Electromagnetic compatibility | NE 21 |
| Degree of protection | IEC 60529 |
| Ambient conditions |
|---|
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 150 g |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
Каталожный номер: 96864
| General specifications |
|---|
| Signal type | Digital Input |
| Supply |
|---|
| Connection | Power Rail or terminals 11+, 12- |
| Rated voltage | 20 ... 30 V DC |
| Input |
|---|
| Connection side | field side |
| Connection | terminals 1 (mass), 2 (min), 3 (max) |
| Open circuit voltage/short-circuit current | approx. 10 V AC (approx. 1 Hz) / approx. 5 mA |
| Control input | min./max. control system: terminals 1, 2, 3
on/off control system: terminals 1, 3 |
| Response sensitivity | 5 ... 150 k&Omega , adjustable via potentiometer (20 turns) |
| Output |
|---|
| Connection side | control side |
| Connection | terminals 7, 8, 9 |
| Output | 1 changeover contact |
| Contact loading | 253 V AC/2 A/cos &phi > 0.7 40 V DC/2 A resistive load |
| Energized/De-energized delay | approx. 1 s / approx. 1 s |
| Indicators/settings |
|---|
| Display elements | LEDs |
| Control elements | DIP-switch
potentiometer |
| Configuration | via DIP switches
via potentiometer |
| Labeling | space for labeling at the front |
| Directive conformity |
|---|
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Low voltage | |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Conformity |
|---|
| Electromagnetic compatibility | NE 21:2006 |
| Degree of protection | IEC 60529:2001 |
| Ambient conditions |
|---|
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP20 |
| Connection | screw terminals , max. 2.5 mm2 |
| Mass | approx. 110 g |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) , housing type B1 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Каталожный номер: 217735
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 217734
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 262113
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 214246
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 240647
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 240652
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 240653
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 214245
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 214248
| General specifications |
|---|
| Signal type | Digital Input |
| Functional safety related parameters |
|---|
| Safety Integrity Level (SIL) | SIL 2 |
| Supply |
|---|
| Connection | Power Rail or terminals 9+, 10- |
| Rated voltage | 19 ... 30 V DC |
| Ripple | &le 10 % |
| Rated current | 30 ... 20 mA |
| Power dissipation | &le 800 mW including maximum power dissipation in the output |
| Input |
|---|
| Connection side | field side |
| Connection | terminals 1+, 2- 3+, 4- |
| Rated values | acc. to EN 60947-5-6 (NAMUR) |
| Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Line fault detection | breakage I &le 0.1 mA , short-circuit I &ge 6.5 mA |
| Pulse/Pause ratio | min. 100 µs / min. 100 µs |
| Output |
|---|
| Connection side | control side |
| Connection | terminals 5, 6 7, 8 |
| Rated voltage | 30 V DC |
| Rated current | 50 mA |
| Response time | &le 200 µs |
| Signal level | 1-signal: (external voltage) - 3 V max. for 50 mA
0-signal: blocked output (off-state current &le 10 µA) |
| Output I | signal Transistor |
| Output II | signal Transistor |
| Collective error message | Power Rail |
| Transfer characteristics |
|---|
| Switching frequency | &le 5 kHz |
| Indicators/settings |
|---|
| Display elements | LEDs |
| Control elements | DIP-switch |
| Configuration | via DIP switches |
| Labeling | space for labeling at the front |
| Directive conformity |
|---|
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
|---|
| Electromagnetic compatibility | NE 21:2011 |
| Degree of protection | IEC 60529:2001 |
| Ambient conditions |
|---|
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 100 g |
| Dimensions | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Каталожный номер: 240648
| General specifications |
|---|
| Signal type | Digital Input |
| Functional safety related parameters |
|---|
| Safety Integrity Level (SIL) | SIL 2 |
| Supply |
|---|
| Connection | Power Rail or terminals 9+, 10- |
| Rated voltage | 19 ... 30 V DC |
| Ripple | &le 10 % |
| Rated current | 30 ... 20 mA |
| Power dissipation | &le 800 mW including maximum power dissipation in the output |
| Input |
|---|
| Connection side | field side |
| Connection | terminals 1+, 2- 3+, 4- |
| Rated values | acc. to EN 60947-5-6 (NAMUR) |
| Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Line fault detection | breakage I &le 0.1 mA , short-circuit I &ge 6.5 mA |
| Pulse/Pause ratio | min. 100 µs / min. 100 µs |
| Output |
|---|
| Connection side | control side |
| Connection | terminals 5, 6 7, 8 |
| Rated voltage | 30 V DC |
| Rated current | 50 mA |
| Response time | &le 200 µs |
| Signal level | 1-signal: (external voltage) - 3 V max. for 50 mA
0-signal: blocked output (off-state current &le 10 µA) |
| Output I | signal Transistor |
| Output II | signal Transistor |
| Collective error message | Power Rail |
| Transfer characteristics |
|---|
| Switching frequency | &le 5 kHz |
| Indicators/settings |
|---|
| Display elements | LEDs |
| Control elements | DIP-switch |
| Configuration | via DIP switches |
| Labeling | space for labeling at the front |
| Directive conformity |
|---|
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
|---|
| Electromagnetic compatibility | NE 21:2011 |
| Degree of protection | IEC 60529:2001 |
| Ambient conditions |
|---|
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP20 |
| Connection | spring terminals |
| Mass | approx. 100 g |
| Dimensions | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Каталожный номер: 242098
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 115621
| Описание оборудования |
|---|
| 115 V AC |
Каталожный номер: 181363
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 231206
| Описание оборудования |
|---|
| 24 V DC |
Каталожный номер: 214247
| General specifications |
|---|
| Signal type | Digital Input |
| Functional safety related parameters |
|---|
| Safety Integrity Level (SIL) | SIL 2 |
| Supply |
|---|
| Connection | Power Rail or terminals 9+, 10- |
| Rated voltage | 19 ... 30 V DC |
| Ripple | &le 10 % |
| Rated current | 30 ... 20 mA + Iout |
| Power dissipation | &le 800 mW including maximum power dissipation in the output |
| Input |
|---|
| Connection side | field side |
| Connection | terminals 1+, 2- 3+, 4- |
| Rated values | acc. to EN 60947-5-6 (NAMUR) |
| Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Line fault detection | breakage I &le 0.1 mA , short-circuit I &ge 6.5 mA |
| Pulse/Pause ratio | min. 100 µs / min. 100 µs |
| Output |
|---|
| Connection side | control side |
| Connection | terminals 5, 6 |
| Rated voltage | 30 V DC |
| Rated current | 50 mA |
| Response time | &le 200 µs |
| Signal level | 1-signal: (supply voltage) - 3 V max. for 50 mA
0-signal: blocked output (off-state current &le 10 µA) |
| Output I | signal Transistor |
| Output II | signal Transistor |
| Collective error message | Power Rail |
| Transfer characteristics |
|---|
| Switching frequency | &le 5 kHz |
| Indicators/settings |
|---|
| Display elements | LEDs |
| Control elements | DIP-switch |
| Configuration | via DIP switches |
| Labeling | space for labeling at the front |
| Directive conformity |
|---|
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
|---|
| Electromagnetic compatibility | NE 21:2011 |
| Degree of protection | IEC 60529:2001 |
| Ambient conditions |
|---|
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 100 g |
| Dimensions | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Каталожный номер: 242099
| General specifications |
|---|
| Signal type | Digital Input |
| Functional safety related parameters |
|---|
| Safety Integrity Level (SIL) | SIL 2 |
| Supply |
|---|
| Connection | Power Rail or terminals 9+, 10- |
| Rated voltage | 19 ... 30 V DC |
| Ripple | &le 10 % |
| Rated current | 30 ... 20 mA + Iout |
| Power dissipation | &le 800 mW including maximum power dissipation in the output |
| Input |
|---|
| Connection side | field side |
| Connection | terminals 1+, 2- 3+, 4- |
| Rated values | acc. to EN 60947-5-6 (NAMUR) |
| Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Line fault detection | breakage I &le 0.1 mA , short-circuit I &ge 6.5 mA |
| Pulse/Pause ratio | min. 100 µs / min. 100 µs |
| Output |
|---|
| Connection side | control side |
| Connection | terminals 5, 6 |
| Rated voltage | 30 V DC |
| Rated current | 50 mA |
| Response time | &le 200 µs |
| Signal level | 1-signal: (supply voltage) - 3 V max. for 50 mA
0-signal: blocked output (off-state current &le 10 µA) |
| Output I | signal Transistor |
| Output II | signal Transistor |
| Collective error message | Power Rail |
| Transfer characteristics |
|---|
| Switching frequency | &le 5 kHz |
| Indicators/settings |
|---|
| Display elements | LEDs |
| Control elements | DIP-switch |
| Configuration | via DIP switches |
| Labeling | space for labeling at the front |
| Directive conformity |
|---|
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
|---|
| Electromagnetic compatibility | NE 21:2011 |
| Degree of protection | IEC 60529:2001 |
| Ambient conditions |
|---|
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP20 |
| Connection | spring terminals |
| Mass | approx. 100 g |
| Dimensions | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Каталожный номер: 96863
| General specifications |
|---|
| Signal type | Digital Input |
| Supply |
|---|
| Connection | Power Rail or terminals 11+, 12- |
| Rated voltage | 20 ... 30 V DC |
| Input |
|---|
| Connection side | field side |
| Connection | terminals 1 (mass), 2 (min), 3 (max) |
| Open circuit voltage/short-circuit current | approx. 10 V AC (approx. 1 Hz) / approx. 5 mA |
| Control input | min./max. control system: terminals 1, 2, 3
on/off control system: terminals 1, 3 |
| Response sensitivity | 1 ... 30 k&Omega , adjustable via potentiometer (20 turns) |
| Output |
|---|
| Connection side | control side |
| Connection | terminals 7, 8, 9 |
| Output | 1 changeover contact |
| Contact loading | 253 V AC/2 A/cos &phi > 0.7 40 V DC/2 A resistive load |
| Energized/De-energized delay | approx. 1 s / approx. 1 s |
| Indicators/settings |
|---|
| Display elements | LEDs |
| Control elements | DIP-switch
potentiometer |
| Configuration | via DIP switches
via potentiometer |
| Labeling | space for labeling at the front |
| Directive conformity |
|---|
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Low voltage | |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Conformity |
|---|
| Electromagnetic compatibility | NE 21:2006 |
| Degree of protection | IEC 60529:2001 |
| Ambient conditions |
|---|
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
|---|
| Degree of protection | IP20 |
| Connection | screw terminals , max. 2.5 mm2 |
| Mass | approx. 110 g |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) , housing type B1 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Компания Zipstore.ru поставляет оптом и в розницу запчасти Pepperl+Fuchs.
Каталог запчастей Pepperl+Fuchs
В каталоге сайта представлено 13440 запчастей Pepperl+Fuchs. Также вы можете приобрести опции и аксессуары для расширения функциональных возможностей, транспортировки и эксплуатации оборудования. Запчасти в каталоге могут иметь полное название, каталожный номер, фотографию, краткое описание, а также модели принтеров, с которыми они совместимы.
Купить запчасти для Pepperl+Fuchs оптом и в розницу
Для оформления заказа вы можете воспользоваться одним из следующих способов:
- отправить заявку по электронной почте info@zipstore.ru
- связаться с нашим менеджером при помощи формы обратной связи
- с помощью активной кнопки "Купить" в каталоге товаров или в конкретном товаре
- с помощью формы "Купить в 1 клик" в конкретном товаре
Мы осуществляем поставки запчастей Pepperl+Fuchs во все города России, а также в Республику Беларусь, Казахстан и другие страны СНГ.
Продажа осуществляется за наличный и безналичный расчет. На сайте указаны розничные цены в рублях и долларах, с учетом НДС. Чтобы узнать оптовые цены на запчасти Pepperl+Fuchs, нужно отправить запрос по электронной почте. Подробнее о способах доставки и оплаты можно узнать в разделе сайта «Оплата и доставка». В разделе «%Скидки и акции» Вы можете найти наиболее выгодные предложения по продаже запчастей, а также сезонные скидки и акции.
Техподдержка
При возникновении вопросов по обслуживанию, эксплуатации, ремонту Pepperl+Fuchs, Вы можете проконсультироваться со специалистами на форуме сайта.
