Запчасти и компоненты для торгового оборудования. Более 8 500 клиентов и более 1 000 000 товаров! Скрыть
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | PNP | |
| Rated operating distance | 25 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 20.25 mm | |
| Reduction factor rAl | 0.5 | |
| Reduction factor rCu | 0.45 | |
| Reduction factor r304 | 0.7 | |
| Reduction factor rBrass | 0.5 | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Operating voltage | 5 ... 60 V | |
| Switching frequency | 0 ... 200 Hz | |
| Hysteresis | typ. 5% | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Inductive overvoltage protection | yes | |
| Surge suppression | yes | |
| Voltage drop | &le 2 V | |
| Rated insulation voltage | 60 V | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0 ... 0.5 mA typ. 6 µA at 25 °C | |
| No-load supply current | &le 7 mA | |
| Switching state indicator | Multihole-LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 830.5 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| EAC conformity | TR CU 020/2011 | |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
| CSA approval | cCSAus Listed, General Purpose, Class 2 Power Source | |
| CCC approval | Certified by China Compulsory Certification (CCC) | |
| E1 Type approval | 10R-04 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 3-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Housing diameter | 30 mm | |
| Degree of protection | IP68 / IP69K | |
| Mass | 94 g | |
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | PNP | |
| Rated operating distance | 25 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 20.25 mm | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 75 mm x 75 mm x 1 mm | |
| Reduction factor rAl | 0.5 | |
| Reduction factor rCu | 0.4 | |
| Reduction factor r304 | 0.7 | |
| Reduction factor rBrass | 0.5 | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Operating voltage | 7 ... 30 V | |
| Switching frequency | 0 ... 450 Hz | |
| Hysteresis | typ. 5% | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | &le 2 V | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0 ... 0.5 mA typ. 4 µA at 25 °C | |
| No-load supply current | &le 10 mA | |
| Switching state indicator | Multihole-LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 1494 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| E1 Type approval | 10R-04 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 3-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Degree of protection | IP68 / IP69K | |
| Mass | 100 g | |
| General information | ||
| Scope of delivery | 2 self locking nuts in scope of delivery | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 45 mm | |
| Seal combination S1 | 41 ... 45 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 464 g | |
| Dimensions | ||
| Width across corners (D2) | 75 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 68 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 53 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking |  II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 4 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | Two-wire | |
| Rated operating distance | 25 mm | |
| Installation | non-flush | |
| Output polarity | AC/DC | |
| Reduction factor rAl | 0.47 | |
| Reduction factor rCu | 0.44 | |
| Reduction factor r304 | 0.77 | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Operating voltage | 20 ... 250 V AC/20 ... 300 V DC | |
| Switching frequency | 30 Hz | |
| Hysteresis | 3 ... 15 typ. 5 % | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Voltage drop | &le 8 V | |
| Operating current | 4 ... 500 mA AC/DC | |
| Off-state current | &le 0.8 mA | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | Certified by China Compulsory Certification (CCC) | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable PUR , 2 m | |
| Core cross-section | 0.5 mm2 | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 343 g | |
| Dimensions | ||
| Width across corners (D2) | 61 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Length outside enclosure (H) | 26 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 46 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 343 g | |
| Dimensions | ||
| Width across corners (D2) | 61 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Length outside enclosure (H) | 26 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 46 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 328 g | |
| Dimensions | ||
| Width across corners (D2) | 61 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Length outside enclosure (H) | 26 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 46 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | Two-wire | |
| Rated operating distance | 25 mm | |
| Installation | non-flush | |
| Output polarity | AC/DC | |
| Reduction factor rAl | 0.47 | |
| Reduction factor rCu | 0.44 | |
| Reduction factor r304 | 0.77 | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Operating voltage | 20 ... 250 V AC/20 ... 300 V DC | |
| Switching frequency | 30 Hz | |
| Hysteresis | 3 ... 15 typ. 5 % | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Voltage drop | &le 8 V | |
| Operating current | 4 ... 500 mA AC/DC | |
| Off-state current | &le 0.8 mA | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | Certified by China Compulsory Certification (CCC) | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 3-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 328 g | |
| Dimensions | ||
| Width across corners (D2) | 61 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Length outside enclosure (H) | 26 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 46 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 34 mm | |
| Seal combination S1 | 31 ... 34 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 292 g | |
| Dimensions | ||
| Width across corners (D2) | 55.5 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 50 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 55 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 34 mm | |
| Seal combination S1 | 31 ... 34 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 292 g | |
| Dimensions | ||
| Width across corners (D2) | 55.5 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 50 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 55 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | Two-wire | |
| Rated operating distance | 25 mm | |
| Installation | non-flush | |
| Output polarity | AC/DC | |
| Reduction factor rAl | 0.47 | |
| Reduction factor rCu | 0.44 | |
| Reduction factor r304 | 0.77 | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Operating voltage | 20 ... 250 V AC/20 ... 300 V DC | |
| Switching frequency | 30 Hz | |
| Hysteresis | 3 ... 15 typ. 5 % | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Voltage drop | &le 8 V | |
| Operating current | 4 ... 500 mA AC/DC | |
| Off-state current | &le 0.8 mA | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | Certified by China Compulsory Certification (CCC) | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector 7/8 inch-16 UN , 3-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 34 mm | |
| Seal combination S1 | 31 ... 34 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 285 g | |
| Dimensions | ||
| Width across corners (D2) | 55.5 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 50 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 55 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 34 mm | |
| Seal combination S1 | 31 ... 34 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 285 g | |
| Dimensions | ||
| Width across corners (D2) | 55.5 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 50 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 55 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 232 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Length outside enclosure (H) | 25 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 45 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M32-M40S.PA | |
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | Two-wire | |
| Rated operating distance | 25 mm | |
| Installation | non-flush | |
| Output polarity | AC/DC | |
| Reduction factor rAl | 0.47 | |
| Reduction factor rCu | 0.44 | |
| Reduction factor r304 | 0.77 | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Operating voltage | 20 ... 250 V AC/20 ... 300 V DC | |
| Switching frequency | 30 Hz | |
| Hysteresis | 3 ... 15 typ. 5 % | |
| Reverse polarity protection | reverse polarity tolerant | |
| Short-circuit protection | yes | |
| Voltage drop | &le 8 V | |
| Operating current | 4 ... 500 mA AC/DC | |
| Off-state current | &le 0.8 mA | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | Certified by China Compulsory Certification (CCC) | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector 1/2"-20 UN , 3-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 232 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Length outside enclosure (H) | 25 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 45 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M32-M40S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 212 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Length outside enclosure (H) | 25 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 45 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M32-M40S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 212 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Length outside enclosure (H) | 25 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 45 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M32-M40S.PA | |
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | Two-wire | |
| Rated operating distance | 25 mm | |
| Installation | non-flush | |
| Output polarity | AC/DC | |
| Reduction factor rAl | 0.47 | |
| Reduction factor rCu | 0.44 | |
| Reduction factor r304 | 0.77 | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Operating voltage | 20 ... 250 V AC/20 ... 300 V DC | |
| Switching frequency | 30 Hz | |
| Hysteresis | 3 ... 15 typ. 5 % | |
| Reverse polarity protection | reverse polarity tolerant | |
| Short-circuit protection | yes | |
| Voltage drop | &le 8 V | |
| Operating current | 4 ... 500 mA AC/DC | |
| Off-state current | &le 0.8 mA | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | Certified by China Compulsory Certification (CCC) | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector 7/8 inch-16 UN , 3-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 10 ... 16 mm | |
| Seal combination S1 | 14.5 ... 16 mm | |
| Seal combination S1+S2 | 12 ... 14.5 mm | |
| Seal combination S1+S2+S3 | 10 ... 12 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 73 g | |
| Dimensions | ||
| Width across corners (D2) | 30 mm | |
| Diameter thru-hole (DT) | 21.4 ... 21.6 mm | |
| Length outside enclosure (H) | 29 mm | |
| Width across flats (SW1) | 28 mm | |
| Width across flats (SW2) | 28 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 45 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 22 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 25 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M20-M25S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 10 ... 16 mm | |
| Seal combination S1 | 14.5 ... 16 mm | |
| Seal combination S1+S2 | 12 ... 14.5 mm | |
| Seal combination S1+S2+S3 | 10 ... 12 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 73 g | |
| Dimensions | ||
| Width across corners (D2) | 30 mm | |
| Diameter thru-hole (DT) | 21.4 ... 21.6 mm | |
| Length outside enclosure (H) | 29 mm | |
| Width across flats (SW1) | 28 mm | |
| Width across flats (SW2) | 28 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 45 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 22 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 25 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 50 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M20-M25S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 10 ... 16 mm | |
| Seal combination S1 | 14.5 ... 16 mm | |
| Seal combination S1+S2 | 12 ... 14.5 mm | |
| Seal combination S1+S2+S3 | 10 ... 12 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 78 g | |
| Dimensions | ||
| Width across corners (D2) | 30 mm | |
| Diameter thru-hole (DT) | 21.4 ... 21.6 mm | |
| Length outside enclosure (H) | 29 mm | |
| Width across flats (SW1) | 28 mm | |
| Width across flats (SW2) | 28 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 45 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 22 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 25 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M20-M25S.PA | |
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | PNP | |
| Rated operating distance | 25 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 20.25 mm | |
| Reduction factor rAl | 0.5 | |
| Reduction factor rCu | 0.45 | |
| Reduction factor r304 | 0.7 | |
| Reduction factor rBrass | 0.55 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 200 Hz | |
| Hysteresis | typ. 5% | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Inductive overvoltage protection | yes | |
| Surge suppression | yes | |
| Voltage drop | &le 2 V | |
| Rated insulation voltage | 60 V | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0 ... 0.5 mA typ. 6 µA at 25 °C | |
| No-load supply current | &le 7 mA | |
| Switching state indicator | Multihole-LED, yellow | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 3-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Housing diameter | 30 mm | |
| Degree of protection | IP67 | |
| Mass | 120 g | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 10 ... 16 mm | |
| Seal combination S1 | 14.5 ... 16 mm | |
| Seal combination S1+S2 | 12 ... 14.5 mm | |
| Seal combination S1+S2+S3 | 10 ... 12 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 78 g | |
| Dimensions | ||
| Width across corners (D2) | 30 mm | |
| Diameter thru-hole (DT) | 21.4 ... 21.6 mm | |
| Length outside enclosure (H) | 29 mm | |
| Width across flats (SW1) | 28 mm | |
| Width across flats (SW2) | 28 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 45 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 22 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 25 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 50 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M20-M25S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 54 g | |
| Dimensions | ||
| Width across corners (D2) | 24 mm | |
| Diameter thru-hole (DT) | 21.4 ... 21.6 mm | |
| Length outside enclosure (H) | 24 mm | |
| Width across flats (SW1) | 24 mm | |
| Width across flats (SW2) | 24 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 40 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5.5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M16-M20S.PA | |
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | Two-wire | |
| Rated operating distance | 25 mm | |
| Installation | non-flush | |
| Output polarity | AC/DC | |
| Reduction factor rAl | 0.47 | |
| Reduction factor rCu | 0.44 | |
| Reduction factor r304 | 0.77 | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Operating voltage | 20 ... 250 V AC/20 ... 300 V DC | |
| Switching frequency | 30 Hz | |
| Hysteresis | 3 ... 15 typ. 5 % | |
| Reverse polarity protection | reverse polarity tolerant | |
| Short-circuit protection | yes | |
| Voltage drop | &le 8 V | |
| Operating current | 4 ... 500 mA AC/DC | |
| Off-state current | &le 0.8 mA | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CCC approval | Certified by China Compulsory Certification (CCC) | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable PUR , 5 m | |
| Core cross-section | 0.5 mm2 | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 54 g | |
| Dimensions | ||
| Width across corners (D2) | 24 mm | |
| Diameter thru-hole (DT) | 21.4 ... 21.6 mm | |
| Length outside enclosure (H) | 24 mm | |
| Width across flats (SW1) | 22 mm | |
| Width across flats (SW2) | 22 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 40 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5.5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 50 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M16-M20S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 51 g | |
| Dimensions | ||
| Width across corners (D2) | 24 mm | |
| Diameter thru-hole (DT) | 21.4 ... 21.6 mm | |
| Length outside enclosure (H) | 24 mm | |
| Width across flats (SW1) | 24 mm | |
| Width across flats (SW2) | 24 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 40 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5.5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M16-M20S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 51 g | |
| Dimensions | ||
| Width across corners (D2) | 24 mm | |
| Diameter thru-hole (DT) | 21.4 ... 21.6 mm | |
| Length outside enclosure (H) | 24 mm | |
| Width across flats (SW1) | 22 mm | |
| Width across flats (SW2) | 22 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 40 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5.5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 50 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M16-M20S.PA | |
Pepperl+Fuchs — немецкий бренд с более чем 75-летней историей инженерного превосходства. Основанная в 1945 году в Мангейме, компания стала пионером бесконтактных датчиков и одним из мировых лидеров в области intrinsically safe решений для опасных сред. Сегодня Pepperl+Fuchs объединяет два направления — Factory Automation и Process Automation — предлагая датчики, интерфейсную электронику, системы взрывозащиты и HMI, которые повышают надежность, безопасность и эффективность производственных процессов.
Решения Pepperl+Fuchs используются в автомобильной промышленности, машиностроении, пищевой и фармацевтической отраслях, логистике и складской автоматизации, а также в нефтегазовом, химическом и горнодобывающем секторах, на объектах энергетики, водоснабжения и очистки стоков. Бренд одинаково эффективен для модернизации отдельных участков и для комплексной автоматизации линий и установок.
Определите среду (включая наличие взрывоопасных зон), необходимые интерфейсы и уровень безопасности, диапазон измерений и точность, а также условия монтажа. Сверьте каталожные номера с требуемыми сертификатами и аксессуарами. При сложных задачах стоит привлечь инженера для подбора комплекта устройств с учетом специфики технологического процесса.
Pepperl+Fuchs — это инвестиция в надежность, безопасность и предсказуемые результаты. Выбирайте оригинальные решения бренда для уверенной работы оборудования сегодня и готовности к задачам завтрашнего дня.
