Купить Датчик (сенсор)

Индуктивный датчик Inductive slot sensor SJ30-A2-V1-Y26178 Pepperl+Fuchs

Каталожный номер: 26178

General specifications
Switching function		complementary
Output type		PNP
Slot width		30 mm
Depth of immersion (lateral)		27 ... 31 typ.
Installation
Output polarity		DC
Nominal ratings
Operating voltage		10 ... 30 V
Switching frequency		0 ... 150 Hz
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		&le 3 V
Operating current		0 ... 200 mA
No-load supply current		&le 20 mA
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		Connector M12 x 1 , 4-pin
Housing material		ABS
Degree of protection		IP67

Индуктивный датчик Inductive slot sensor SJ30-N Pepperl+Fuchs

Каталожный номер: 106616

General specifications
Switching function		Normally closed (NC)
Output type		NAMUR
Slot width		30 mm
Depth of immersion (lateral)		27 ... 30 mm
Output type		2-wire
Nominal ratings
Nominal voltage		8.2 V (R_i approx. 1 k&Omega)
Operating voltage		5 ... 25 V
Switching frequency		0 ... 150 Hz
Hysteresis		0.1 ... 0.3 mm
Current consumption
	Measuring plate not detected	&ge 3 mA
	Measuring plate detected	&le 1 mA
Functional safety related parameters
MTTF_d		11060 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
Approvals and certificates
FM approval
	Control drawing	116-0165
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated &le36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		cable PVC , 2 m
Core cross-section		0.75 mm²
Housing material		ABS
Degree of protection		IP67
Cable
	Bending radius	> 10 x cable diameter
Mass		450 g
Equipment protection level Da
Highest permissible ambient temperature		Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the surface temperature, and the effective internal reactance values can be found on the EU-type-examination certificate. The maximum permissible ambient temperature of the data sheet must be noted, in addition, the lower of the two values must be maintained.
General information
Use in the hazardous area		see instruction manuals
	Category	1G 2G 1D

Индуктивный датчик Inductive slot sensor SJ5-G-N Pepperl+Fuchs

Каталожный номер: 106604

General specifications
Switching function		Normally closed (NC)
Output type		NAMUR
Slot width		5 mm
Depth of immersion (lateral)		5 ... 7 mm , typ. 6 mm
Output type		2-wire
Nominal ratings
Nominal voltage		8.2 V (R_i approx. 1 k&Omega)
Operating voltage		5 ... 25 V
Switching frequency		0 ... 2000 Hz
Hysteresis		0.05 ... 0.65 mm
Current consumption
	Measuring plate not detected	&ge 3 mA
	Measuring plate detected	&le 1 mA
Functional safety related parameters
MTTF_d		9060 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated &le36 V
Ambient conditions
Ambient temperature		-25 ... 100 °C (-13 ... 212 °F)
Mechanical specifications
Connection type		flexible leads LiY , 500 mm
Core cross-section		0.14 mm²
Housing material		PBT
Degree of protection		IP67
Equipment protection level Da
Highest permissible ambient temperature		Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the surface temperature, and the effective internal reactance values can be found on the EU-type-examination certificate. The maximum permissible ambient temperature of the data sheet must be noted, in addition, the lower of the two values must be maintained.
General information
Use in the hazardous area		see instruction manuals
	Category	1G 2G 1D

Индуктивный датчик Inductive slot sensor SJ5-K-N Pepperl+Fuchs

Каталожный номер: 106605

General specifications
Switching function		Normally closed (NC)
Output type		NAMUR
Slot width		5 mm
Depth of immersion (lateral)		8 ... 10 mm , typ. 9 mm
Output type		2-wire
Nominal ratings
Nominal voltage		8.2 V (R_i approx. 1 k&Omega)
Operating voltage		5 ... 25 V
Switching frequency		0 ... 2000 Hz
Hysteresis		0.05 ... 0.3 mm
Current consumption
	Measuring plate not detected	&ge 3 mA
	Measuring plate detected	&le 1 mA
Functional safety related parameters
MTTF_d		4560 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
Approvals and certificates
FM approval
	Control drawing	116-0165
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated &le36 V
Ambient conditions
Ambient temperature		-25 ... 100 °C (-13 ... 212 °F)
Mechanical specifications
Connection type		cable PVC , 2 m
Core cross-section		0.75 mm²
Housing material		PBT
Degree of protection		IP67
Cable
	Bending radius	> 10 x cable diameter
Equipment protection level Da
Highest permissible ambient temperature		Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the surface temperature, and the effective internal reactance values can be found on the EU-type-examination certificate. The maximum permissible ambient temperature of the data sheet must be noted, in addition, the lower of the two values must be maintained.
General information
Use in the hazardous area		see instruction manuals
	Category	1G 2G 1D

Индуктивный датчик Inductive slot sensor SJ5-K-N-6M Pepperl+Fuchs

Каталожный номер: 106606

General specifications
Switching function		Normally closed (NC)
Output type		NAMUR
Slot width		5 mm
Depth of immersion (lateral)		8 ... 10 typ. 9 mm
Output type		2-wire
Nominal ratings
Nominal voltage		8.2 V (R_i approx. 1 k&Omega)
Switching frequency		0 ... 2000 Hz
Current consumption
	Measuring plate not detected	min. 3 mA
	Measuring plate detected	&le 1 mA
Functional safety related parameters
MTTF_d		4560 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated &le36 V
Ambient conditions
Ambient temperature		-25 ... 100 °C (-13 ... 212 °F)
Mechanical specifications
Connection type		cable PVC , 6 m
Core cross-section		0.75 mm²
Housing material		PBT
Degree of protection		IP67
Cable
	Bending radius	> 10 x cable diameter
Equipment protection level Da
Highest permissible ambient temperature		Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the surface temperature, and the effective internal reactance values can be found on the EU-type-examination certificate. The maximum permissible ambient temperature of the data sheet must be noted, in addition, the lower of the two values must be maintained.
General information
Use in the hazardous area		see instruction manuals
	Category	1G 2G 1D

Индуктивный датчик Inductive slot sensor SJ5-N Pepperl+Fuchs

Каталожный номер: 106607

General specifications
Switching function		Normally closed (NC)
Output type		NAMUR
Slot width		5 mm
Depth of immersion (lateral)		5 ... 7 mm , typ. 6 mm
Output type		2-wire
Nominal ratings
Nominal voltage		8.2 V (R_i approx. 1 k&Omega)
Operating voltage		5 ... 25 V
Switching frequency		0 ... 2000 Hz
Hysteresis		0.05 ... 0.65 mm
Current consumption
	Measuring plate not detected	&ge 3 mA
	Measuring plate detected	&le 1 mA
Functional safety related parameters
MTTF_d		9060 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
Approvals and certificates
FM approval
	Control drawing	116-0165
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated &le36 V
Ambient conditions
Ambient temperature		-25 ... 100 °C (-13 ... 212 °F)
Mechanical specifications
Connection type		flexible leads LiY , 500 mm
Core cross-section		0.14 mm²
Housing material		PBT
Degree of protection		IP67
Equipment protection level Da
Highest permissible ambient temperature		Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the surface temperature, and the effective internal reactance values can be found on the EU-type-examination certificate. The maximum permissible ambient temperature of the data sheet must be noted, in addition, the lower of the two values must be maintained.
General information
Use in the hazardous area		see instruction manuals
	Category	1G 2G 1D

Индуктивный датчик Inductive slot sensor SJ5-N-Y293307 Pepperl+Fuchs

Каталожный номер: 293307

General specifications
Slot width		5 mm
Depth of immersion (lateral)		5 ... 7 mm , typ. 6 mm
Output polarity		NAMUR
Output type		2-wire
Nominal ratings
Nominal voltage		8.2 V (R_i approx. 1 k&Omega)
Operating voltage		5 ... 25 V
Switching frequency		0 ... 2000 Hz
Hysteresis		0.05 ... 0.65 mm
Current consumption
	Measuring plate not detected	&ge 3 mA
	Measuring plate detected	&le 1 mA
Functional safety related parameters
MTTF_d		9060 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
	NAMUR	EN 60947-5-6:2000 IEC 60947-5-6:1999
Approvals and certificates
CCC approval		CCC approval / marking not required for products rated &le36 V
Ambient conditions
Ambient temperature		-25 ... 100 °C (-13 ... 212 °F)
Mechanical specifications
Connection type		flexible leads PTFE , 500 mm
Core cross-section		0.14 mm²
Housing material		PBT
Degree of protection		IP67
Data for application in connection with hazardous areas
Equipment protection level		Ga , Gb , Da , Mb
General information
Use in the hazardous area		see instruction manuals

Индуктивный датчик NBB2-8GS40-E2-PUR Pepperl+Fuchs

Каталожный номер: 304615-0092

Индуктивный датчик Pepperl Fuchs NCN4-12GM60-B3-C2-V1

Каталожный номер: NCN4-12GM60-B3-C2-V1

Индуктивный датчик Protective cover SH-F31K2-B32 Pepperl+Fuchs

Каталожный номер: 240229

Описание оборудования
Protective cap for mechanical protection and for use in applications in conditions where moisture is present.

Инкрементальный поворотный шифратор General Purpose Incremental Encoder RHI58N-*******1 Pepperl+Fuchs

Каталожный номер: T10715

Снят с производства. Замена на ENI58IL-H12BA5-0100UD1-RC1 (283627-100548) датчик угла поворота.

General specifications
Detection type		photoelectric sampling
Pulse count		max. 5000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 60 mA
Output
Output type		push-pull, incremental
Voltage drop		< 3 V
Load current		max. per channel 40 mA , short-circuit protected, reverse polarity protected
Output frequency		max. 200 kHz
Rise time		400 ns
Connection
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
	Glass disk	-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F), fixed cable
	Plastic disk	-5 ... 60 °C (23 ... 140 °F) , movable cable -20 ... 60 °C (-4 ... 140 °F), fixed cable
Storage temperature
	Glass disk	-40 ... 85 °C (-40 ... 185 °F)
	Plastic disk	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 290 g
Rotational speed		max. 6000 min ^-1
Moment of inertia		&le 40 gcm²
Starting torque		&le 1.5 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор General Purpose Incremental Encoder RHI58N-*******6 Pepperl+Fuchs

Каталожный номер: T10714

General specifications
Detection type		photoelectric sampling
Pulse count		max. 5000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		5 V DC ± 5 %
No-load supply current		max. 70 mA
Output
Output type		RS 422, incremental
Load current		max. per channel 20 mA , conditionally short-circuit proof (not with U_b)
Output frequency		max. 200 kHz
Rise time		100 ns
Connection
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
	Glass disk	-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F), fixed cable
	Plastic disk	-5 ... 60 °C (23 ... 140 °F) , movable cable -20 ... 60 °C (-4 ... 140 °F), fixed cable
Storage temperature
	Glass disk	-40 ... 85 °C (-40 ... 185 °F)
	Plastic disk	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 290 g
Rotational speed		max. 6000 min ^-1
Moment of inertia		&le 40 gcm²
Starting torque		&le 1.5 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор General Purpose Incremental Encoder RHI58N-*******X Pepperl+Fuchs

Каталожный номер: T10713

General specifications
Detection type		photoelectric sampling
Pulse count		max. 5000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 50 mA
Output
Output type		RS 422, incremental
Load current		max. per channel 20 mA , conditionally short-circuit proof (not with U_b), reverse polarity protected
Output frequency		max. 200 kHz
Rise time		100 ns
Connection
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
	Glass disk	-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F), fixed cable
	Plastic disk	-5 ... 60 °C (23 ... 140 °F) , movable cable -20 ... 60 °C (-4 ... 140 °F), fixed cable
Storage temperature
	Glass disk	-40 ... 85 °C (-40 ... 185 °F)
	Plastic disk	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 290 g
Rotational speed		max. 6000 min ^-1
Moment of inertia		&le 40 gcm²
Starting torque		&le 1.5 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор General Purpose Incremental Encoder RSI58N-*******1 Pepperl+Fuchs

Каталожный номер: T10716

General specifications
Detection type		photoelectric sampling
Pulse count		max. 5000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 60 mA
Output
Output type		push-pull, incremental
Voltage drop		< 3 V
Load current		max. per channel 40 mA , short-circuit prtected (not with U_b), reverse polarity protected
Output frequency		max. 200 kHz
Rise time		400 ns
Connection
Connector		type 9416 (M23), 12-pin or M12 connector, 8-pin
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-3, no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
	Glass disk	-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F), fixed cable
	Plastic disk	-5 ... 60 °C (23 ... 140 °F) , movable cable -20 ... 60 °C (-4 ... 140 °F), fixed cable
Storage temperature
	Glass disk	-40 ... 100 °C (-40 ... 212 °F)
	Plastic disk	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 280 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		&le 35 gcm²
Starting torque		&le 1 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор General Purpose Incremental Encoder RSI58N-*******6 Pepperl+Fuchs

Каталожный номер: T10718

General specifications
Detection type		photoelectric sampling
Pulse count		max. 5000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		5 V DC ± 5 %
No-load supply current		max. 70 mA
Output
Output type		RS 422, incremental
Load current		max. per channel 20 mA , conditionally short-circuit proof (not with U_b)
Output frequency		max. 200 kHz
Rise time		100 ns
Connection
Connector		type 9416 (M23), 12-pin or M12 connector, 8-pin
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-3, no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
	Glass disk	-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F), fixed cable
	Plastic disk	-5 ... 60 °C (23 ... 140 °F) , movable cable -20 ... 60 °C (-4 ... 140 °F), fixed cable
Storage temperature
	Glass disk	-40 ... 100 °C (-40 ... 212 °F)
	Plastic disk	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 280 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		&le 35 gcm²
Starting torque		&le 1 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор General Purpose Incremental Encoder RSI58N-*******X Pepperl+Fuchs

Каталожный номер: T10717

General specifications
Detection type		photoelectric sampling
Pulse count		max. 5000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 50 mA
Output
Output type		RS 422, incremental
Load current		max. per channel 20 mA , conditionally short-circuit proof (not with U_b), reverse polarity protected
Output frequency		max. 200 kHz
Rise time		100 ns
Connection
Connector		type 9416 (M23), 12-pin or M12 connector, 8-pin
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-3, no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
	Glass disk	-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F), fixed cable
	Plastic disk	-5 ... 60 °C (23 ... 140 °F) , movable cable -20 ... 60 °C (-4 ... 140 °F), fixed cable
Storage temperature
	Glass disk	-40 ... 100 °C (-40 ... 212 °F)
	Plastic disk	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 280 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		&le 35 gcm²
Starting torque		&le 1 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор General Purpose Incremental Encoder RVI58N-*******1 Pepperl+Fuchs

Каталожный номер: T151794

General specifications
Detection type		photoelectric sampling
Pulse count		max. 5000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 60 mA
Output
Output type		push-pull, incremental
Voltage drop		< 3 V
Load current		max. per channel 40 mA , short-circuit protected, reverse polarity protected
Output frequency		max. 200 kHz
Rise time		400 ns
Connection
Connector		type 9416 (M23), 12-pin, type 9416L (M23), 12-pin or M12 connector, 8-pin
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP65
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
	Glass disk	-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F) , fixed cable
	Plastic disk	-5 ... 60 °C (23 ... 140 °F) , movable cable -20 ... 60 °C (-4 ... 140 °F) , fixed cable
Storage temperature
	Glass disk	-40 ... 85 °C (-40 ... 185 °F)
	Plastic disk	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 350 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		&le 25 gcm²
Starting torque		&le 1.5 Ncm
Shaft load
	Axial	40 N at max. 6000 min^-1 10 N at max. 12000 min^-1
	Radial	60 N at max. 6000 min^-1 20 N at max. 12000 min^-1

Инкрементальный поворотный шифратор General Purpose Incremental Encoder RVI58N-*******6 Pepperl+Fuchs

Каталожный номер: T151798

General specifications
Detection type		photoelectric sampling
Pulse count		max. 5000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		5 V DC ± 5 %
No-load supply current		max. 70 mA
Output
Output type		RS 422, incremental
Load current		max. per channel 20 mA , conditionally short-circuit proof
Output frequency		max. 200 kHz
Rise time		100 ns
Connection
Connector		type 9416 (M23), 12-pin, type 9416L (M23), 12-pin or M12 connector, 8-pin
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP65
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
	Glass disk	-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F) , fixed cable
	Plastic disk	-5 ... 60 °C (23 ... 140 °F) , movable cable -20 ... 60 °C (-4 ... 140 °F) , fixed cable
Storage temperature
	Glass disk	-40 ... 85 °C (-40 ... 185 °F)
	Plastic disk	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 350 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		&le 25 gcm²
Starting torque		&le 1.5 Ncm
Shaft load
	Axial	40 N at max. 6000 min^-1 10 N at max. 12000 min^-1
	Radial	60 N at max. 6000 min^-1 20 N at max. 12000 min^-1

Инкрементальный поворотный шифратор General Purpose Incremental Encoder RVI58N-*******X Pepperl+Fuchs

Каталожный номер: T151795

General specifications
Detection type		photoelectric sampling
Pulse count		max. 5000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 50 mA
Output
Output type		RS 422, incremental
Load current		max. per channel 20 mA , conditionally short-circuit proof (not with U_b), reverse polarity protected
Output frequency		max. 200 kHz
Rise time		100 ns
Connection
Connector		type 9416 (M23), 12-pin, type 9416L (M23), 12-pin or M12 connector, 8-pin
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP65
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
	Glass disk	-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F) , fixed cable
	Plastic disk	-5 ... 60 °C (23 ... 140 °F) , movable cable -20 ... 60 °C (-4 ... 140 °F) , fixed cable
Storage temperature
	Glass disk	-40 ... 85 °C (-40 ... 185 °F)
	Plastic disk	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 350 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		&le 25 gcm²
Starting torque		&le 1.5 Ncm
Shaft load
	Axial	40 N at max. 6000 min^-1 10 N at max. 12000 min^-1
	Radial	60 N at max. 6000 min^-1 20 N at max. 12000 min^-1

Инкрементальный поворотный шифратор Heavy-duty incremental encoder ENI11HD-H Pepperl+Fuchs

Каталожный номер: T169746

General specifications
Detection type		photoelectric sampling
Pulse count		max. 2500
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		50 E+9 at 1750 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC or 5 V DC ± 5 % (see "Output circuit" in the ordering information)
No-load supply current		max. 70 mA
Output
Output type		push-pull, incremental or RS 422, incremental (see "Output circuit" in the ordering information)
Voltage drop		< 2.5 V (push-pull, incremental)
Load current		max. per channel 40 mA , short-circuit protected, reverse polarity protected (push-pull, incremental) max. per channel 20 mA , short-circuit protected, reverse polarity protected (RS 422, incremental)
Output frequency		max. 200 kHz
Rise time		600 ns
De-energized delay		600 ns
Connection
Connector		M23 connector, 12-pin , clockwise rotation M23 connector, 12-pin , counter clockwise rotation
Cable		&empty6.5 mm, 4 x 2 x 0.14 mm²
Terminal compartment		Cable duct for cable diameter &empty4 mm ... 13 mm
Standard conformity
Degree of protection		DIN EN 60529, IP66, IP67 or IP69K ¹⁾
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 200 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz
Ambient conditions
Operating temperature		-40 ... 80 °C (-40 ... 176 °F) fixed cable
Storage temperature		-40 ... 80 °C (-40 ... 176 °F)
Mechanical specifications
Material
	Housing	3.1645 aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 2200 g
Rotational speed		max. 3000 min ^-1 ¹⁾
Starting torque		&le 10 Ncm
Shaft load
	Axial	&le 300 N
	Radial	&le 400 N
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор Heavy-duty incremental encoder ENI11HD-R Pepperl+Fuchs

Каталожный номер: T169665

General specifications
Detection type		photoelectric sampling
Pulse count		max. 2500
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		50 E+9 at 1750 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC or 5 V DC ± 5 % (see "Output circuit" in the ordering information)
No-load supply current		max. 70 mA
Output
Output type		push-pull, incremental or RS 422, incremental (see "Output circuit" in the ordering information)
Voltage drop		< 2.5 V (push-pull, incremental)
Load current		max. per channel 40 mA , short-circuit protected, reverse polarity protected (push-pull, incremental) max. per channel 20 mA , short-circuit protected, reverse polarity protected (RS 422, incremental)
Output frequency		max. 200 kHz
Rise time		600 ns
De-energized delay		600 ns
Connection
Connector		M23 connector, 12-pin , clockwise rotation M23 connector, 12-pin , counter clockwise rotation
Cable		&empty6.5 mm, 4 x 2 x 0.14 mm²
Terminal compartment		Cable duct for cable diameter &empty4 mm ... 13 mm
Standard conformity
Degree of protection		DIN EN 60529, IP66, IP67 or IP69K ¹⁾
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 200 g, 6 ms
Vibration resistance		DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz
Ambient conditions
Operating temperature		-40 ... 80 °C (-40 ... 176 °F) fixed cable
Storage temperature		-40 ... 80 °C (-40 ... 176 °F)
Mechanical specifications
Material
	Housing	3.1645 aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 2200 g
Rotational speed		max. 3000 min ^-1 ¹⁾
Starting torque		&le 10 Ncm
Shaft load
	Axial	&le 300 N
	Radial	&le 400 N
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор Incremental Encoder for special applications RHI58N-*******1 Pepperl+Fuchs

Каталожный номер: T151829

General specifications
Detection type		photoelectric sampling
Pulse count		max. 50000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 60 mA
Output
Output type		push-pull, incremental
Voltage drop		< 3 V
Load current		max. per channel 40 mA , short-circuit protected, reverse polarity protected
Output frequency		max. 200 kHz
Rise time		400 ns
Connection
Cable		&empty6.5 mm, 4 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature		-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F), fixed cable
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 290 g
Rotational speed		max. 6000 min ^-1
Moment of inertia		&le 40 gcm²
Starting torque		&le 1.5 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор Incremental Encoder for special applications RHI58N-*******6 Pepperl+Fuchs

Каталожный номер: T151830

General specifications
Detection type		photoelectric sampling
Pulse count		max. 50000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		5 V DC ± 5 %
No-load supply current		max. 70 mA
Output
Output type		RS 422, incremental
Load current		max. per channel 20 mA , conditionally short-circuit proof (not with U_b)
Output frequency		max. 200 kHz
Rise time		100 ns
Connection
Cable		&empty6.5 mm, 4 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature		-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F), fixed cable
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 290 g
Rotational speed		max. 6000 min ^-1
Moment of inertia		&le 40 gcm²
Starting torque		&le 1.5 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор Incremental Encoder for special applications RHI58N-*******X Pepperl+Fuchs

Каталожный номер: T151831

General specifications
Detection type		photoelectric sampling
Pulse count		max. 50000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 50 mA
Output
Output type		RS 422, incremental
Load current		max. per channel 20 mA , conditionally short-circuit proof (not with U_b), reverse polarity protected
Output frequency		max. 200 kHz
Rise time		100 ns
Connection
Cable		&empty6.5 mm, 4 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature		-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F), fixed cable
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 290 g
Rotational speed		max. 6000 min ^-1
Moment of inertia		&le 40 gcm²
Starting torque		&le 1.5 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор Incremental Encoder for special applications RHI58N-0BAYYR61Y-01024 Pepperl+Fuchs

Каталожный номер: 285717

General specifications
Detection type		photoelectric sampling
Pulse count		max. 1024
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 60 mA
Output
Output type		push-pull, incremental
Voltage drop		< 3 V
Load current		max. per channel 40 mA , short-circuit protected, reverse polarity protected
Output frequency		max. 200 kHz
Rise time		400 ns
Connection
Cable		200 mm cable with M12 connector, 8-pin
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
	Plastic disk	-5 ... 60 °C (23 ... 140 °F) , movable cable -30 ... 60 °C (-4 ... 140 °F), fixed cable
Storage temperature
	Plastic disk	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 290 g
Rotational speed		max. 6000 min ^-1
Moment of inertia		&le 40 gcm²
Starting torque		&le 1.5 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор Incremental Encoder for special applications RSI58N-*******1 Pepperl+Fuchs

Каталожный номер: T151826

General specifications
Detection type		photoelectric sampling
Pulse count		max. 50000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 60 mA
Output
Output type		push-pull, incremental
Voltage drop		< 3 V
Load current		max. per channel 40 mA , short-circuit prtected (not with U_b), reverse polarity protected
Output frequency		max. 200 kHz
Rise time		400 ns
Connection
Connector		type 9416 (M23), 12-pin or M12 connector, 8-pin
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature		-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F), fixed cable
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 280 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		&le 35 gcm²
Starting torque		&le 1 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор Incremental Encoder for special applications RSI58N-*******6 Pepperl+Fuchs

Каталожный номер: T151827

General specifications
Detection type		photoelectric sampling
Pulse count		max. 50000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		5 V DC ± 5 %
No-load supply current		max. 70 mA
Output
Output type		RS 422, incremental
Load current		max. per channel 20 mA , conditionally short-circuit proof (not with U_b)
Output frequency		max. 200 kHz
Rise time		100 ns
Connection
Connector		type 9416 (M23), 12-pin or M12 connector, 8-pin
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature		-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F), fixed cable
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 280 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		&le 35 gcm²
Starting torque		&le 1 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор Incremental Encoder for special applications RSI58N-*******X Pepperl+Fuchs

Каталожный номер: T151828

General specifications
Detection type		photoelectric sampling
Pulse count		max. 50000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 50 mA
Output
Output type		RS 422, incremental
Load current		max. per channel 20 mA , conditionally short-circuit proof (not with U_b), reverse polarity protected
Output frequency		max. 200 kHz
Rise time		100 ns
Connection
Connector		type 9416 (M23), 12-pin or M12 connector, 8-pin
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP54
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature		-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F), fixed cable
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 280 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		&le 35 gcm²
Starting torque		&le 1 Ncm
Shaft load
	Angle offset	1 °
	Axial offset	max. 1 mm

Инкрементальный поворотный шифратор Incremental Encoder for special applications RVI58N-*******1 Pepperl+Fuchs

Каталожный номер: T151797

General specifications
Detection type		photoelectric sampling
Pulse count		max. 50000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		10 ... 30 V DC
No-load supply current		max. 60 mA
Output
Output type		push-pull, incremental
Voltage drop		< 3 V
Load current		max. per channel 40 mA , short-circuit protected, reverse polarity protected
Output frequency		max. 200 kHz
Rise time		400 ns
Connection
Connector		type 9416 (M23), 12-pin, type 9416L (M23), 12-pin or M12 connector, 8-pin
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP65
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature		-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F) , fixed cable -40 ... 80 °C (-40 ... 176 °F) with Option T , fixed cable
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 350 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		&le 25 gcm²
Starting torque		&le 1.5 Ncm
Shaft load
	Axial	40 N at max. 6000 min^-1 10 N at max. 12000 min^-1
	Radial	60 N at max. 6000 min^-1 20 N at max. 12000 min^-1

Инкрементальный поворотный шифратор Incremental Encoder for special applications RVI58N-*******6 Pepperl+Fuchs

Каталожный номер: T151799

General specifications
Detection type		photoelectric sampling
Pulse count		max. 50000
Functional safety related parameters
MTTF_d		140 a
Mission Time (T_M)		20 a
L_10h		70 E+9 at 6000 rpm
Diagnostic Coverage (DC)		0 %
Electrical specifications
Operating voltage		5 V DC ± 5 %
No-load supply current		max. 70 mA
Output
Output type		RS 422, incremental
Load current		max. per channel 20 mA , conditionally short-circuit proof
Output frequency		max. 200 kHz
Rise time		100 ns
Connection
Connector		type 9416 (M23), 12-pin, type 9416L (M23), 12-pin or M12 connector, 8-pin
Cable		&empty7.8 mm, 6 x 2 x 0.14 mm², 1 m
Standard conformity
Degree of protection		DIN EN 60529, IP65
Climatic testing		DIN EN 60068-2-78 , no moisture condensation
Emitted interference		EN 61000-6-4:2007/A1:2011
Noise immunity		EN 61000-6-2:2005
Shock resistance		DIN EN 60068-2-27, 100 g, 3 ms
Vibration resistance		DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approval		cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature		-5 ... 80 °C (23 ... 176 °F) , movable cable -20 ... 80 °C (-4 ... 176 °F) , fixed cable -40 ... 80 °C (-40 ... 176 °F) with Option T , fixed cable
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
	Housing	powder coated aluminum
	Flange	3.1645 aluminum
	Shaft	Stainless steel 1.4305 / AISI 303
Mass		approx. 350 g
Rotational speed		max. 12000 min ^-1
Moment of inertia		&le 25 gcm²
Starting torque		&le 1.5 Ncm
Shaft load
	Axial	40 N at max. 6000 min^-1 10 N at max. 12000 min^-1
	Radial	60 N at max. 6000 min^-1 20 N at max. 12000 min^-1

Тип запчасти - Датчик (сенсор)