Товаров: 0
На сумму: 0
Инвертор (преобразователь частоты) V7 Omron CIMR-V7AZ47P5
Control methods | Sine wave PWM (V/f control, sensorless vector control) |
Output frequency range | 0.1..400 Hz |
Frequency tolerance | Digital set value: ±0.01% (-10..+50 ºC) Analogue set value: ±0.5% (25 ±10 ºC) |
Resolution of frequency set value | Digital set value: 0.01 Hz (<100 Hz), 0.1 Hz (>100 Hz) Analogue set value: 1/1000 of maximum frequency |
Resolution of output frequency | 0.01 Hz |
Overload capability | 150%/60 s |
Frequency set value | 0..10 V (20 kΩ), 4..20 mA (250 Ω), 0..20 mA (250 Ω) Pulse train input, frequency setting value (selectable) |
Braking torque (short term peak torque) | Up to 200 W 150% or more 550 W to 1.1 kW 100% or more 1.5 kW 50% or more >1.5 kW 20% or more Continuous braking torque approx. 20% without, 150% with external braking resistor |
Binary inputs | 7 freely programmable inputs |
Binary outputs | 1 relay output, 2 freely programmable open collector outputs |
Analogue output | 1 programmable analogue output (0..10 V)/pulse output |
Analogue inputs | 2 analogue inputs, 0..10 V, 4..20 mA, 0..20 mA |
Braking/acceleration times | 0.01..6000 s |
Display | Optionally frequency, current or set value Error and status LED |
Motor overload protection | Electronic thermal overload relay |
Instantaneous overcurrent | Motor coasts to a stop at approx. 250% of inverter rated current |
Overload | Motor coasts to a stop after 1 minute at 150% of inverter rated output current |
Overvoltage | Motor coasts to a stop if DC bus voltage exceed 410 V (double for 400 V class) |
Undervoltage | Stops when DC bus voltage is approx. 200 V or less (double for 400 V class) approx. 160 V or less for single-phase series) |
Momentary power loss | Following items are selectable: not provided (stop if power loss is 15 ms or longer), continuous operation if power loss is approx. 0.5 s or shorter, continuous operation |
Cooling fin overheat | Protected by electronic circuit |
Stall prevention level | Individual levels during accel/constant speed. Decel ON/OFF available. During decel enable/disable selectable. |
Cooling fan fault | Detected by electronic circuit (fan lock detection) |
Ground fault | Protected by electronic circuit (operation level is approx. 250% of rated output current) |
Power charge indication | RUN lamp stays ON or digital operator LED stays ON until the DC bus voltage becomes 50 V or less. (Charge LED is provided for 400 V) |
Degree of protection | IP20, NEMA1, IP65 |
Cooling | Self cooling for 200 V 0.1..0.4 kW (3 or single phase) and for 400 V 0.2..0.75 kW Cooling fan for 200 V 0.75 to 7.5 kW and for 400 V 1.5 to 7.5 kW |
Ambient temperature | Open air mounting: -10 ºC..50 ºC Wall mounting: -10 ºC..40 ºC |
Ambient humidity | 95% (without condensation) |
Storage temperature | -20 ºC..+60 ºC (short-term temperature during transportation) |
Installation | Indoor (no corrosive gas, dust, etc.) |
Installation height | Max. 1000 m |
Vibration | 10 to 20 Hz, 9.8 m/s2 max; 20 to 50 Hz, 2 m/s2 max |
Производитель | Omron |
Все информационные материалы, представленные на сайте, носят справочный характер и не могут в полной мере передавать достоверную информацию о свойствах и характеристиках Инвертор (преобразователь частоты) V7 Omron CIMR-V7AZ47P5.
Фотография на сайте служит дополнительным источником для определения совместимости запчастей с Вашим оборудованием, и не может являться основным. Основной источник по совместимости запчастей - актуальная документация производителя оборудования, из которой значимой информацией для заказа являются: название запчасти и каталожный номер.
Запасные части и комплектующие подбираются самостоятельно покупателем строго по каталожным номерам из официальных деталировок производителей. В случае, если номенклатура товара совпадает с фактически поставленной, но не подходит на оборудование - в ее замене или возврате может быть отказано.
Цена Инвертор (преобразователь частоты) V7 Omron CIMR-V7AZ47P5 на сайте имеет информационный характер и может отличаться от цены в коммерческом предложении.