Купить Pepperl+Fuchs в интернет-магазине Zipstore.ru

Преобразователь температуры WirelessHART Temperature Converter WHA-UT-F7B1-0-PP-Z1-Ex2 Pepperl+Fuchs

Каталожный номер: 211734

Supply
Rated voltage		3.6 V DC , battery operated
Power dissipation/power consumption		< 0.09 W
Input
Connection		terminals 1, 2, 3, 4
RTD		type Pt100, Pt1000 (IEC 751: 1995 GOST: alpha = 0.391)
	Connection	2-wire: 2 sensors, 3- or 4-wire: 1 sensor
	Lead resistance	max. 10 &Omega
	Measuring circuit monitoring	sensor breakage
Thermocouples		type E, J, K, T (IEC 584-1)
	Cold junction compensation	internal , external
	Measuring circuit monitoring	sensor breakage
	Measurement range	type K: -270 ... 1370 °C type T: -270 ... 400 °C type E: -270 ... 1000 °C type J: -210 ... 1200 °C
Resistor
	Measurement range	0 ... 500 &Omega , 0 ... 4000 &Omega
Voltage		mV Input
	Measurement range	-100 ... 100 mV , 0 ... 300 mV
Input resistance		&ge 1 M&Omega
Output
Output variables		PV: input 1 (°C, &Omega, mV) SV: input 2 (°C, &Omega, mV) TV: CJC temperature (°C) estimated battery life (days) battery voltage (volts) residual battery capacity (%)
Transfer characteristics
Accuracy		- internal cold junction compensation error ± 1,5 °C (typ. acc. to IEC 61298-3) - external cold junction compensation error ± 1 °C (typ.) - resolution error < 0.1 °C - accuracy TC ± 20 µV - accuracy RTD: ± 100 m&Omega
Indicators/settings
Parameter assignment		- sampling period: 1, 2, 5, 10, 30 seconds or 1, 2, 5, 10, 30, 60 minutes - transmit power: configurable 0 dBm or 10 dBm (EIRP) - sensor type - mapping of input measuring values 1 and 2 into primary variable (PV) and secondary variable (SV) - publishing of up to three messages from the device, transmission rate selectable from 4 seconds to 60 minutes
Directive conformity
Electromagnetic compatibility
	Directive 2004/108/EC	EN 61326-1:2006
Radio and telecommunication terminal equipment		The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning.
	Directive 99/5/EC	ETSI EN 300328: V1.7.1 (2006-10), ETSI EN 301489-17: V1.2.1 (2002-08), EN 60950:2001
	FCC CFR47 Part 15 B and C	ANSI C63.4-2003
Conformity
Degree of protection		IEC 60529
Accuracy		IEC 61298-3
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-20 ... 70 °C (-4 ... 158 °F)
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3 test setup and execution acc. to EN 60068-2-60
Mechanical specifications
Degree of protection		IP65
Mass		approx. 1000 g
Dimensions		77 x 129 x 177 mm (3 x 5.08 x 6.97 inch)
Mounting		panel or pole mounting
Data for application in connection with hazardous areas
EC-Type Examination Certificate		IMQ 09 ATEX 008X
	Group, category, type of protection	II 2(1)G Ex ia [ia] IIC T4
Directive conformity
	Directive 94/9/EC	EN 60079-0:2006, EN 60079-11:2007, EN 60079-26:2007
International approvals
FM approval		CoC 3042534
IECEx approval		IECEx INE 09.0025X
	Approved for	Ex ia IIC T4
Accessories
Designation		battery W-BAT-B1-Li mandatory for use in connection with hazardous areas (order separately) Mounting set W-ACC-F7MK External cold junction compensation W-ACC-CJC

Индуктивный датчик Inductive sensor NBB15-30GM50-WS-5M Pepperl+Fuchs

Каталожный номер: 802853

General specifications
Switching function		Normally open (NO)
Output type		Two-wire
Rated operating distance		15 mm
Installation		quasi flush
Output polarity		AC
Assured operating distance		0 ... 12.15 mm
Actual operating distance		13.5 ... 16.5 mm
Reduction factor r_Al		0.33
Reduction factor r_Cu		0.28
Reduction factor r₃₀₄		0.81
Nominal ratings
Operating voltage		20 ... 253 V
Switching frequency		0 ... 20 Hz
Hysteresis		typ. 5 %
Voltage drop		< 5 V (I_L > 50 mA) < 8 V (I_L < 50 mA)
Momentary current (20 ms, 0.1 Hz)		0 ... 1600 mA
Operating current		5 ... 200 mA
Off-state current		0 ... 1.7 mA
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Standard conformity
Standards		IEC / EN 60947-5-2:2004
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Core cross-section		0.75 mm²
Housing material		brass, nickel-plated
Sensing face		PBT
Housing diameter		30 mm
Degree of protection		IP67
Note		¹⁾ In the temperature range below 0 °C, permissible operating voltage U_b 80...253 V Safety fuse &le 0.3 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly.

Датчик предельной вибрации Vibration Limit Switch LVL-A7 Pepperl+Fuchs

Каталожный номер: 275573

General specifications
Measuring method		The tuning fork is brought to its resonance frequency by means of a piezoelectric drive. If the tuning fork is covered by liquid, this frequency changes. The electronics monitor the resonance frequency and indicate whether the tuning fork is freely vibrating or is covered by liquid.
Construction type		compact device device with short tube
Operating mode		MAX = maximum safety: The device keeps the electronic switch closed as long as the liquid level is below the fork. example application: overspill protection MIN = minimum safety: The device keeps the electronic switch closed as long as the fork is immersed in liquid. example application: dry running protection of pumps The electronic switch opens if the limit is reached, if a fault occurs or in the event of a power fails (quiescent current principle)
Supply
Rated voltage		- DC-PNP: 10 ... 35 V DC, 3-wire - AC/DC: 20 ... 253 V AC/DC, 2-wire
Current consumption		- DC-PNP: < 15 mA - AC/DC: < 3.8 mA
Input
Measured variable		density
Measurement range		min. 0.7 g/cm³, optional> 0.5 g/cm³
Output
Output type		switch output
Switching current		max. 250 mA
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2006 , EN 61326-2-3:2006
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-64
Climate class		DIN EN 60068-2-38/IEC 68-2-38
Measurement accuracy
Reference operating conditions		- ambient temperature: 25 °C (+77 °F) - process pressure: 1 bar (14.5 psi) - fluid: water (density: approx. 1 g/cm³, viscosity: 1 mm²/s) - medium temperature: 25 °C (+77 °F) - density setting: > 0.7 g/cm³ - switching time delay: standard (0,5 s, 1 s)
Measured value resolution		< 0.5 mm
Measuring frequency		approx. 1100 Hz in air
Switching point		13 mm ± 1 mm
Non-repeatability		± 1 mm acc. to DIN 61298-2
Hysteresis		max. 3 mm
Influence of ambient temperature		negligible
Influence of medium temperature		-25 µm/°C
Influence of medium pressure		-20 µm/bar
Switching time		- 0.5 s when tuning fork is covered - 1.0 s when tuning fork is uncovered - other switching times on request
Operating conditions
Installation conditions
	Installation position	see section mounting position
Ambient conditions
	Ambient temperature	-40 ... 70 °C (-40 ... 158 °F)
	Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
	Shock resistance	a = 300 m/s² = 30 g, 3 planes x 2 directions x 3 shocks x 18 ms, as per test Ea
	Vibration resistance	a(RMS) = 50 m/s², ASD = 1.25 (m/s²)²/Hz, f = 5 to 2000 Hz, t = 3 x 2 h
Process conditions
	Medium temperature	-40 ... +100 °C (-40 ... +212 °F) -40 ... +150 °C (-40 ... +302 °F)
	Process pressure (static pressure)	-1 ... +40 bar (-14.5 ... +580 psi)
	State of aggregation	liquid
	Density	min. 0.7 g/cm³, optional> 0.5 g/cm³
	Viscosity	1 ... 10000 mPa/s, dynamic viscosity
	Solid contents	< &empty5 mm
Mechanical specifications
Degree of protection		- IP65/67, NEMA 4X enclosure (plug M12) - IP65, NEMA 4X enclosure (valve plug) - IP65/68, NEMA 4X/6P enclosure (cable)
Connection		- cable 5 m - valve plug NPT1/2 - valve plug QUICKON - valve plug M16 - plug M12
Material		see technical information (TI)
Surface quality		R_a < 3.2 µm
Mass		see technical information (TI)
Dimensions		see technical information (TI)
Process connection		- thread ISO 228 G1/2, G3/4, G1 - thread EN 10226 R1/2, R3/4, R1 - thread ASME MNPT1/2, MNPT3/4, MNPT1
Certificates and approvals
Overspill protection		Z-65.11-554 (overspill protection acc. to WHG) Z-65.40-555 (leak detection system acc. to WHG) If you need the approvals also in paper form, select the option WH in the type code.
Accessories
Designation		see technical information (TI)

Датчик предельной вибрации Vibration Limit Switch LVL-A7H Pepperl+Fuchs

Каталожный номер: 275575

General specifications
Measuring method		The tuning fork is brought to its resonance frequency by means of a piezoelectric drive. If the tuning fork is covered by liquid, this frequency changes. The electronics monitor the resonance frequency and indicate whether the tuning fork is freely vibrating or is covered by liquid.
Construction type		compact device device with short tube
Operating mode		MAX = maximum safety: The device keeps the electronic switch closed as long as the liquid level is below the fork. example application: overspill protection MIN = minimum safety: The device keeps the electronic switch closed as long as the fork is immersed in liquid. example application: dry running protection of pumps The electronic switch opens if the limit is reached, if a fault occurs or in the event of a power fails (quiescent current principle)
Supply
Rated voltage		- DC-PNP: 10 ... 35 V DC, 3-wire - AC/DC: 20 ... 253 V AC/DC, 2-wire
Current consumption		- DC-PNP: < 15 mA - AC/DC: < 3.8 mA
Input
Measured variable		density
Measurement range		min. 0.7 g/cm³, optional> 0.5 g/cm³
Output
Output type		switch output
Switching current		max. 250 mA
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2006 , EN 61326-2-3:2006
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-64
Climate class		DIN EN 60068-2-38/IEC 68-2-38
Measurement accuracy
Reference operating conditions		- ambient temperature: 25 °C (+77 °F) - process pressure: 1 bar (14.5 psi) - fluid: water (density: approx. 1 g/cm³, viscosity: 1 mm²/s) - medium temperature: 25 °C (+77 °F) - density setting: > 0.7 g/cm³ - switching time delay: standard (0,5 s, 1 s)
Measured value resolution		< 0.5 mm
Measuring frequency		approx. 1100 Hz in air
Switching point		13 mm ± 1 mm
Non-repeatability		± 1 mm acc. to DIN 61298-2
Hysteresis		max. 3 mm
Influence of ambient temperature		negligible
Influence of medium temperature		-25 µm/°C
Influence of medium pressure		-20 µm/bar
Switching time		- 0.5 s when tuning fork is covered - 1.0 s when tuning fork is uncovered - other switching times on request
Operating conditions
Installation conditions
	Installation position	see section mounting position
Ambient conditions
	Ambient temperature	-40 ... 70 °C (-40 ... 158 °F)
	Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
	Shock resistance	a = 300 m/s² = 30 g, 3 planes x 2 directions x 3 shocks x 18 ms, as per test Ea
	Vibration resistance	a(RMS) = 50 m/s², ASD = 1.25 (m/s²)²/Hz, f = 5 to 2000 Hz, t = 3 x 2 h
Process conditions
	Medium temperature	-40 ... +100 °C (-40 ... +212 °F) -40 ... +150 °C (-40 ... +302 °F)
	Process pressure (static pressure)	-1 ... +40 bar (-14.5 ... +580 psi)
	State of aggregation	liquid
	Density	min. 0.7 g/cm³, optional> 0.5 g/cm³
	Viscosity	1 ... 10000 mPa/s, dynamic viscosity
	Solid contents	< &empty5 mm
Mechanical specifications
Degree of protection		- IP65/67, NEMA 4X enclosure (plug M12) - IP65, NEMA 4X enclosure (valve plug) - IP65/68, NEMA 4X/6P enclosure (cable) - IP66/68/69, NEMA 4X/6P Enclosure (M12 plug for metal housing cover)
Connection		- cable 5 m - valve plug NPT1/2 - valve plug QUICKON - valve plug M16 - plug M12
Material		see technical information (TI)
Surface quality		R_a < 1.5 µm (EHEDG) R_a < 0.76 µm (EHEDG, 3-A)
Mass		see technical information (TI)
Dimensions		see technical information (TI)
Process connection		- thread ISO 228 G1/2, G3/4, G1 - DIN 11851 DN25 PN40, DN32 PN40, DN40 PN40 - thread ASME MNPT1/2, MNPT3/4, MNPT1 - thread M24 x 1,5 for flush-mounted installation in adapter - DIN 11851 DN25 PN40, DN32 PN40, DN40 PN40 (dairy pipe) - Tri-Clamp ISO 2852 DN25-38, DN40-51 - Flush-mounting in weld-in adapter Rd52, tuning fork can be aligned
Certificates and approvals
Sanitary compatibility		EHEDG , see approval (ZE)
Overspill protection		Z-65.11-554 (overspill protection acc. to WHG) Z-65.40-555 (leak detection system acc. to WHG) If you need the approvals also in paper form, select the option WH in the type code.
Accessories
Designation		see technical information (TI)

Датчик предельной вибрации Vibration Limit Switch LVL-B1 Pepperl+Fuchs

Каталожный номер: 272173

General specifications
Measuring method		A piezoelectric drive excites the vibrating rod of the device to its resonance frequency. If medium covers the vibrating rod, the rod's vibrating amplitude changes (the vibration is damped). The electronics of the device compare the actual amplitude with a target value and indicates whether the vibrating rod is vibrating freely or whether it is covered by medium.
Equipment architecture		The measuring system consists of: - the device with electronic insert - a supply point - the connected control systems, switching units, signalling systems (e. g. lamps, horns, PCS, PLC, etc.)
Construction type		compact device
Operating mode		MAX = maximum safety: The device switches if the probe is covered or if the supply voltage is disconnected in a safety-oriented manner (signal on alarm). example application: overspill protection MIN = minimum safety: The device switches if the probe is uncovered or if the supply voltage is disconnected in a safetyoriented manner (signal on alarm). example application: dry-running protection
Supply
Rated voltage		electronic insert FEM22 (E5): 10 ... 45 V DC electronic insert FEM24 (WA): 19 ... 253 V AC, 50/60 Hz or 19 ... 55 V DC
Ripple		electronic insert FEM22 (E5): max. 5 V, 0 ... 400 Hz
Current consumption		electronic insert FEM22 (E5): max. 18 mA
Reverse polarity protection		separation voltage 2.2 kV
Electrical specifications
Surge protection		electronic insert FEM22 (E5) : overvoltage category III
Input
Input signal		probe covered - small amplitude probe not covered - large amplitude
Measured variable		level (according to the mounting location and the overall length)
Measurement range		The measuring range depends on the mounting location of the device
Output
Output signal		digital
Galvanic isolation
Input/Other circuits		electronic insert FEM24 (WA)
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2006 , EN 61326-2-3:2006
Low voltage
	Directive 2014/35/EU	electronic insert FEM24 (WA) : EN 61010-1:2010
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529:2001
Vibration resistance		EN 60068-2-27
Climate class		EN 60068, part 2-38, fig. 2a
Measurement accuracy
Measuring frequency		700 ... 800 Hz
Switching time		when covering the sensor approx. 0.5 s, when uncovering the sensor approx. 1.0 s
Operating conditions
Installation conditions
	Installation position	see section mounting position
Process conditions
	Process temperature	-40 ... 150 °C (-40 ... 302 °F)
	Medium pressure limits	-1 ... 25 bar max. working pressure 25 bar, burst pressure 100 bar
	Thermal shock resistance	max. 120 K
	State of aggregation	solids
	Solid contents	&le &empty25 mm
	Bulk density	&ge 200 g/l, not fluidised
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protection		IP66/IP67, NEMA 4X
Connection		gland M20 thread G1/2, NPT1/2
Material		F16 housing: PTB-FR, cover with transparent glass made of PA12, EPDM cover seal F18 housing: aluminum EN-AC-AlSi10Mg, plastic coated cover seal: EPDM process connections, sensor: stainless steel 1.4435/316L
Mass		device with F16 housing, electronic insert FEM24 (WA) and R1 thread: approx. 1.0 kg
Dimensions		max. &empty85 mm (3.3 inch), length 372 mm (14.6 inch)
Process connection		thread R1, R1-1/2 acc. to DIN 2999 thread 1-1/4 - 11-1/2 NPT, 1-1/2 - 11-1/2 NPT acc. to ANSI B 1.20.1
Data for application in connection with hazardous areas
EC-Type Examination Certificate		KEMA 06 ATEX 0055
	Group, category, type of protection	II 1/3D Ex ta/tc IIIC T170°C Da/Dc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-31:2009
International approvals
IECEx approval		IECEx DEK 11.0068
	Approved for	Ex ta/tc IIIC T170°C Da/Dc

Индуктивный датчик Inductive sensor NBB15-30GM50-WS-V12 Pepperl+Fuchs

Каталожный номер: 801695

General specifications
Switching function		Normally open (NO)
Output type		Two-wire
Rated operating distance		15 mm
Installation		quasi flush
Output polarity		AC
Assured operating distance		0 ... 12.15 mm
Actual operating distance		13.5 ... 16.5 mm
Reduction factor r_Al		0.33
Reduction factor r_Cu		0.28
Reduction factor r₃₀₄		0.81
Nominal ratings
Operating voltage		20 ... 253 V
Switching frequency		0 ... 20 Hz
Hysteresis		typ. 5 %
Reverse polarity protection		reverse polarity tolerant
Voltage drop		< 5 V (I_L > 50 mA) < 8 V (I_L < 50 mA)
Momentary current (20 ms, 0.1 Hz)		0 ... 1600 mA
Operating current		5 ... 200 mA
Off-state current		0 ... 1.7 mA
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		Connector 1/2"-20 UN , 3-pin
Housing material		brass, nickel-plated
Sensing face		PBT
Housing diameter		30 mm
Degree of protection		IP67
Note		¹⁾ In the temperature range below 0 °C, permissible operating voltage U_b 80...253 V Safety fuse &le 0.2 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly.

Датчик предельной вибрации Vibration Limit Switch LVL-B2 Pepperl+Fuchs

Каталожный номер: 272174

General specifications
Measuring method		A piezoelectric drive excites the vibrating rod of the device to its resonance frequency. If medium covers the vibrating rod, the rod's vibrating amplitude changes (the vibration is damped). The electronics of the device compare the actual amplitude with a target value and indicates whether the vibrating rod is vibrating freely or whether it is covered by medium.
Equipment architecture		The measuring system consists of: - the device with electronic insert - a supply point - the connected control systems, switching units, signalling systems (e. g. lamps, horns, PCS, PLC, etc.)
Construction type		device with pipe extension
Operating mode		MAX = maximum safety: The device switches if the probe is covered or if the supply voltage is disconnected in a safety-oriented manner (signal on alarm). example application: overspill protection MIN = minimum safety: The device switches if the probe is uncovered or if the supply voltage is disconnected in a safetyoriented manner (signal on alarm). example application: dry-running protection
Supply
Rated voltage		electronic insert FEM22 (E5): 10 ... 45 V DC electronic insert FEM24 (WA): 19 ... 253 V AC, 50/60 Hz or 19 ... 55 V DC
Ripple		electronic insert FEM22 (E5): max. 5 V, 0 ... 400 Hz
Current consumption		electronic insert FEM22 (E5): max. 18 mA
Reverse polarity protection		separation voltage 2.2 kV
Electrical specifications
Surge protection		electronic insert FEM22 (E5) : overvoltage category III
Input
Input signal		probe covered - small amplitude probe not covered - large amplitude
Measured variable		level (according to the mounting location and the overall length)
Measurement range		The measuring range depends on the mounting location of the device and the length of the pipe extension selected. The pipe extension is available in the following lengths: 500 mm, 1000 mm, 1500 mm, 20 inch, 40 inch, 60 inch
Output
Output signal		digital
Galvanic isolation
Input/Other circuits		electronic insert FEM24 (WA)
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2006 , EN 61326-2-3:2006
Low voltage
	Directive 2014/35/EU	electronic insert FEM24 (WA) : EN 61010-1:2010
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529:2001
Vibration resistance		EN 60068-2-27
Climate class		EN 60068, part 2-38, fig. 2a
Measurement accuracy
Measuring frequency		700 ... 800 Hz
Switching time		when covering the sensor approx. 0.5 s, when uncovering the sensor approx. 1.0 s
Operating conditions
Installation conditions
	Installation position	see section mounting position
Process conditions
	Process temperature	-40 ... 150 °C (-40 ... 302 °F)
	Medium pressure limits	-1 ... 25 bar max. working pressure 25 bar, burst pressure 100 bar
	Thermal shock resistance	max. 120 K
	State of aggregation	solids
	Solid contents	&le &empty25 mm
	Bulk density	&ge 200 g/l, not fluidised
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protection		IP66/IP67, NEMA 4X
Connection		gland M20 thread G1/2, NPT1/2
Material		F16 housing: PTB-FR, cover with transparent glass made of PA12, EPDM cover seal F18 housing: aluminum EN-AC-AlSi10Mg, plastic coated cover seal: EPDM process connections, sensor: stainless steel 1.4435/316L
Mass		device with F16 housing, electronic insert FEM24 (WA) and R1 thread: - 500 mm (20 inch) = approx. 1.3 kg - 1000 mm (40 inch) = approx. 2.0 kg - 1500 mm (60 inch) = approx. 2.6 kg
Dimensions		max. &empty85 mm (3.3 inch), length 160 mm (6.3 inch) + L L = 500 mm, 1000 mm, 1500 mm, 20 inch, 40 inch, 60 inch
Process connection		thread R1, R1-1/2 acc. to DIN 2999 thread 1-1/4 - 11-1/2 NPT, 1-1/2 - 11-1/2 NPT acc. to ANSI B 1.20.1
Data for application in connection with hazardous areas
EC-Type Examination Certificate		KEMA 06 ATEX 0055
	Group, category, type of protection	II 1/3D Ex ta/tc IIIC T170°C Da/Dc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-31:2009
International approvals
IECEx approval		IECEx DEK 11.0068
	Approved for	Ex ta/tc IIIC T170°C Da/Dc
Accessories
Optional accessories		LVL-Z200 sliding sleeve for pressurized containerLVL-Z201 sliding sleeve for pressurized container LVL-Z202 sliding sleeve for unpressurized container LVL-Z203 sliding sleeve for unpressurized container

Датчик предельной вибрации Vibration Limit Switch LVL-M1 Pepperl+Fuchs

Каталожный номер: 270754

General specifications
Function principle		limit detection Maximum or minimum detection in tanks or pipelines containing all types of liquids including use in explosion hazardous areas. Particularly suited to very aggressive liquids thanks to high degree of corrosion protection.
Measuring method		The forks of the sensors vibrate at their intrinsic frequency. This frequency is reduced when covered with liquid. The change in frequency then activates the limit switch.
Construction type		compact device
Supply
Rated voltage		electronic insert FEL50A (PA): 9 ... 32 V DC electronic insert FEL51 (AC): 253 V AC, 50/60 Hz electronic insert FEL52 (E5): 10 ... 55 V DC electronic insert FEL54 (WA): 19 ... 253 V AC, 50/60 Hz or 19 ... 55 V DC electronic insert FEL55 (SI): 11 ... 36 V DC, PLC electronic insert FEL56 (N1), FEL58 (N2): isolating amplifier acc. to EN 60947-5-6 (NAMUR)
Current consumption		electronic insert FEL52 (E5): max. 15 mA
Electrical specifications
Surge protection		electronic insert FEL51 (AC), electronic insert FEL52 (E5), electronic insert FEL54 (WA), electronic insert FEL55 (SI): overvoltage category III
Input
Switching point		see section switch point
Measured variable		limit level (limit value)
Measurement range		depends on mounting point
Output
Switching delay		when fork is covered: approx. 0.5 s, when fork is exposed: approx. 1.0 s (other switching times on request) additionally configurable for PROFIBUS PA (electronic insert FEL50A (PA)): 0.5 ... 60 s
Switch behaviour		switch-over for minimum/maximum residual current safety on electronic insert MAX = maximum safety: The output switches to the power fail response when the fork is covered. for use with overspill protection for example MIN = minimum safety: The output switches to the power fail response when the fork is exposed. for use with dry running protection for example When switching on the power supply the output assumes the alarm signal. After max. 2 s it assumes the correct switching mode.
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Vibration resistance		EN 60068-2-6
Climate class		DIN EN 60068-2-38/IEC 68-2-38
Measurement accuracy
Reference operating conditions		ambient temperature: 23 °C (73.4 °F), medium temperature: 23 °C (73.4 °F), product density: 1 g/cm³ (water), viscosity: 1 mm²/s, medium pressure p_e: 0 bar, sensor mounting: vertical from above, density switch: to > 0.7 g/cm³
Maximum measured error		max. ± 1 mm, specified by mounting position
Non-repeatability		0.1 mm
Hysteresis		approx. 2 mm
Influence of medium density		max. +4.8 ... -3.5 mm (0.5 ... 1.5 g/cm³)
Influence of medium temperature		max. +1.4 ... -2.8 mm (-40 ... 150 °C (-40 ... 302 °F))
Influence of medium pressure		max. 0 ... -2.5 mm (-1 ... 64 bar)
Operating conditions
Installation conditions
	Installation position	any position
Process conditions
	Medium temperature	-50 ... 150 °C (-58 ... 302 °F) , exceptions see process connections
	Medium pressure	p_e = -1 ... 64 bar (-14.5 ... 928.3 psi) over the entire temperature range , exceptions see process connections
	Test pressure	max. 100 bar (1.5 times the medium pressure p_e), no function during test pressure, burst pressure of diaphragm 200 bar
	Thermal shock resistance	max. 120 °C/s (max. 120 K/s)
	State of aggregation	liquid
	Density	min. 0.5 g/cm³ (compact housing 0.7 g/cm³), other density settings on request
	Viscosity	max. 10000 mm²/s (max. 10000 cSt)
	Solid contents	< &empty5 mm
Ambient conditions
Ambient temperature		-50 ... 70 °C (-58 ... 158 °F) , function with reduced data values see section ambient temperature
Storage temperature		-50 ... 80 °C (-58 ... 176 °F)
Vibration resistance		10 ... 50 Hz, 0.15 mm, 100 cycles
Mechanical specifications
Degree of protection		polyester, steel, and aluminum housing: IP66/IP67 compact housing: - IP65 with valve connector PG11 or 1/2NPT - IP66/IP68 with M12 x 1 connector without LEDs (1.4435/316L) - IP69K with M12 x 1 connector with LEDs (1.4435/316L)
Connection		electronic inserts: cross section max. 2.5 mm², lace in end splice in acc. with DIN 46228 ground lead in housing: cross section max. 2.5 mm² external equipotential bonding: cross section 4 mm²
Material		wetted parts: - process connection: 1.4435/316L or 2.4610/Alloy C4 - vibration fork: 1.4435/316L or 2.4610/Alloy C4 - flat seal for process connection G2* or G3*: elastomer fibre, asbestos-free housings: - polyester housing: PBT-FR with PBT-FR cover or with PA12 cover with sight glass, cover seal: EPDM - stainless steel housing: 1.4435/316L, cover seal: silicone - aluminum housing: EN-AC-AlSi10Mg, plastic-coated, cover seal: EPDM - compact housing with valve connector or M12 connector: 1.4435/316L cable gland: polyamide or brass, nickel-plated temperature spacer: 1.4435/316L flameproof bushing: 1.4435/316L
Surface quality		R_a < 3.2 µm/80 grit: length, spacer, bushings A, B, *E
Mass		600 g , basic weight: compact sensor, electronic insert, stainless steel housing, process connection G2, additional weight is dependent on housing and process connection process connections: - A31 1000 g, A41 1200 g, A51 1500 g, A6 2400 g, A81 4900 g, A91 7000 g - C45 1400 g, C51 1200 g, C71 1600 g, C75 3200 g, C95 5900 g, CA3 5600 g - D45 1400 g, D51 1200 g, D71 1600 g, D75 3200 g, D95 5900 g, DA3 5600 g - F45 1400 g, F51 1200 g, F55 2000 g, F61 1400 g, F65 2400 g, F71 1600 g, F75 3200 g, F7F 2600 g, F81 2400 g, F85 4300 g, F93 4800 g, F95 5900 g, FA3 5600 g, FA5 7500 g - G3* 200 g - J13 no information, J16 no information, J17 1700 g, J19 no information, J1A no information, J1C 1700 g - N3* 200 g, N75 2900 g - R3* 200 g - T51 no information, T61 100 g temperature spacer, flameproof bushing: - IA 600 g, QA 700 g
Dimensions		housing: diameter max. 85 mm, height max. 173 mm temperature separator, flameproof bushing: additional length L 140 mm process connection: length L 66.5 ... 80 mm extension: length type II, for vertical installation from above same switching point as Vibracon LVL1, LVL2 vibration fork: width 17.5 mm, fork width 10 mm, length 25 mm
Process connection		- cylindrical thread G3/4A, G1A to DIN ISO 228/1 with flat seal to DIN 7603 - conical thread R3/4, R1 to DIN 2999, part 1 - conical thread 3/4NPT, 1NPT to ANSI B 1.20.1 - flush-mounted with welding sleeve to factory standard (G3/4A, G1A) - Triclamp 1-1/2 inch, 2 inch to ISO 2852 - flanges to EN 1092-1 from DN25, to ANSI B 16.5 from 1 inch, to JIS B 2238 (RF) from DN25 For further information see type code.
Data for application in connection with hazardous areas
EU-Type Examination Certificate		see instruction manuals (SI)
International approvals
FM approval		see control drawings (ZD)
CSA approval		see control drawings (ZD)
IECEx approval		see instruction manuals (SI)
Certificates and approvals
SIL classification		up to SIL2 acc. to IEC 61508
Overspill protection		see approval (ZE)
Accessories
Designation		see technical information (TI)

Индуктивный датчик Inductive sensor NBB15-30GM50-WS-V93 Pepperl+Fuchs

Каталожный номер: 801699

General specifications
Switching function		Normally open (NO)
Output type		Two-wire
Rated operating distance		15 mm
Installation		quasi flush
Output polarity		AC
Assured operating distance		0 ... 12.15 mm
Actual operating distance		13.5 ... 16.5 mm
Reduction factor r_Al		0.33
Reduction factor r_Cu		0.28
Reduction factor r₃₀₄		0.81
Output type		2-wire
Nominal ratings
Operating voltage		20 ... 253 V
Switching frequency		0 ... 20 Hz
Hysteresis		typ. 5 %
Reverse polarity protection		reverse polarity tolerant
Voltage drop		< 5 V (I_L > 50 mA) < 8 V (I_L < 50 mA)
Momentary current (20 ms, 0.1 Hz)		0 ... 1600 mA
Operating current		5 ... 200 mA
Off-state current		0 ... 1.7 mA
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		Connector 7/8 inch-16 UN , 3-pin
Housing material		brass, nickel-plated
Sensing face		PBT
Degree of protection		IP67
Note		¹⁾ In the temperature range below 0 °C, permissible operating voltage U_b 80...253 V Safety fuse &le 0.3 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly.

Датчик предельной вибрации Vibration Limit Switch LVL-M1H Pepperl+Fuchs

Каталожный номер: 271507

General specifications
Function principle		limit detection Maximum or minimum detection in tanks or pipelines containing all types of liquids including use in explosion hazardous areas. Particularly suited to very aggressive liquids thanks to high degree of corrosion protection.
Measuring method		The forks of the sensors vibrate at their intrinsic frequency. This frequency is reduced when covered with liquid. The change in frequency then activates the limit switch.
Construction type		device with extension tube
Supply
Rated voltage		electronic insert FEL50A (PA): 9 ... 32 V DC electronic insert FEL51 (AC): 253 V AC, 50/60 Hz electronic insert FEL52 (E5): 10 ... 55 V DC electronic insert FEL54 (WA): 19 ... 253 V AC, 50/60 Hz or 19 ... 55 V DC electronic insert FEL55 (SI): 11 ... 36 V DC, PLC electronic insert FEL56 (N1), FEL58 (N2): isolating amplifier acc. to EN 60947-5-6 (NAMUR)
Current consumption		electronic insert FEL52 (E5): max. 15 mA
Electrical specifications
Surge protection		electronic insert FEL51 (AC), electronic insert FEL52 (E5), electronic insert FEL54 (WA), electronic insert FEL55 (SI): overvoltage category III
Input
Switching point		see section switch point
Measured variable		limit level (limit value)
Measurement range		depends on mounting point and pipe extension up to 3000 mm , larger sizes on request
Output
Switching delay		when fork is covered: approx. 0.5 s, when fork is exposed: approx. 1.0 s (other switching times on request) additionally configurable for PROFIBUS PA (electronic insert FEL50A (PA)): 0.5 ... 60 s
Switch behaviour		switch-over for minimum/maximum residual current safety on electronic insert MAX = maximum safety: The output switches to the power fail response when the fork is covered. for use with overspill protection for example MIN = minimum safety: The output switches to the power fail response when the fork is exposed. for use with dry running protection for example When switching on the power supply the output assumes the alarm signal. After max. 2 s it assumes the correct switching mode.
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Vibration resistance		EN 60068-2-6
Climate class		DIN EN 60068-2-38/IEC 68-2-38
Measurement accuracy
Reference operating conditions		ambient temperature: 23 °C (73.4 °F), medium temperature: 23 °C (73.4 °F), product density: 1 g/cm³ (water), viscosity: 1 mm²/s, medium pressure p_e: 0 bar, sensor mounting: vertical from above, density switch: to > 0.7 g/cm³
Maximum measured error		max. ± 1 mm, specified by mounting position
Non-repeatability		0.1 mm
Hysteresis		approx. 2 mm
Influence of medium density		max. +4.8 ... -3.5 mm (0.5 ... 1.5 g/cm³)
Influence of medium temperature		max. +1.4 ... -2.8 mm (-40 ... 150 °C (-40 ... 302 °F))
Influence of medium pressure		max. 0 ... -2.5 mm (-1 ... 64 bar)
Operating conditions
Installation conditions
	Installation position	any position
Process conditions
	Medium temperature	-50 ... 150 °C (-58 ... 302 °F) , exceptions see process connections
	Medium pressure	p_e = -1 ... 64 bar (-14.5 ... 928.3 psi) over the entire temperature range , exceptions see process connections
	Test pressure	max. 100 bar (1.5 times the medium pressure p_e), no function during test pressure, burst pressure of diaphragm 200 bar
	Thermal shock resistance	max. 120 °C/s (max. 120 K/s)
	State of aggregation	liquid
	Density	min. 0.5 g/cm³ (compact housing 0.7 g/cm³), other density settings on request
	Viscosity	max. 10000 mm²/s (max. 10000 cSt)
	Solid contents	< &empty5 mm
Ambient conditions
Ambient temperature		-50 ... 70 °C (-58 ... 158 °F) , function with reduced data values see section ambient temperature
Storage temperature		-50 ... 80 °C (-58 ... 176 °F)
Vibration resistance		10 ... 50 Hz, 0.15 mm, 100 cycles
Mechanical specifications
Degree of protection		polyester, steel, and aluminum housing: IP66/IP67 compact housing: - IP65 with valve connector PG11 or 1/2NPT - IP66/IP68 with M12 x 1 connector without LEDs (1.4435/316L) - IP69K with M12 x 1 connector with LEDs (1.4435/316L)
Connection		electronic inserts: cross section max. 2.5 mm², lace in end splice in acc. with DIN 46228 ground lead in housing: cross section max. 2.5 mm² external equipotential bonding: cross section 4 mm²
Material		wetted parts: - process connection: 1.4435/316L - vibration fork: 1.4435/316L - flat seal for process connection G2* or G3*: elastomer fibre, asbestos-free housings: - polyester housing: PBT-FR with PBT-FR cover or with PA12 cover with sight glass, cover seal: EPDM - stainless steel housing: 1.4435/316L, cover seal: silicone - aluminum housing: EN-AC-AlSi10Mg, plastic-coated, cover seal: EPDM - compact housing with valve connector or M12 connector: 1.4435/316L cable gland: polyamide or brass, nickel-plated temperature spacer: 1.4435/316L flameproof bushing: 1.4435/316L
Surface quality		R_a < 1.5 µm/120 grit: length, spacer, bushings C R_a < 0.3 µm/320 grit: length, spacer, bushings D
Mass		700 g , basic weight: compact sensor, electronic insert, stainless steel housing, process connection G2, additional weight is dependent on extension tube, housing and process connection process connections: - A31 1000 g, A41 1200 g, A51 1500 g, A6 2400 g, A81 4900 g, A91 7000 g - C45 1400 g, C51 1200 g, C71 1600 g, C75 3200 g, C95 5900 g, CA3 5600 g - D75 3200 g, D7A 300 g, D7D 300 g, D95 5900 g, DA3 5600 g - F45 1400 g, F51 1200 g, F55 2000 g, F61 1400 g, F65 2400 g, F71 1600 g, F75 3200 g, F81 2400 g, F85 4300 g, F93 4800 g, F95 5900 g, FA3 5600 g, FA5 7500 g - G3E 200 g - J13 no information, J16 no information, J17 1700 g, J19 no information, J1A no information, J1C 1700 g - RR no information - S13 300 g, S61 200 g, SV1 no information - T51 no information, T61 100 g temperature spacer, flameproof bushing: - I 600 g, Q* 700 g
Dimensions		housing: diameter max. 85 mm, height max. 173 mm temperature separator, flameproof bushing: additional length L 140 mm process connection: length L 55.5 ... 80 mm extension: any length L from 148 ... 3000 mm, larger sizes on request extension: length type II, for vertical installation from above same switching point as Vibracon LVL1, LVL2 vibration fork: width 17.5 mm, fork width 10 mm, length 25 mm
Process connection		- cylindrical thread G3/4A, G1A to DIN ISO 228/1 with flat seal to DIN 7603 - conical thread R3/4, R1 to DIN 2999, part 1 - flush-mounted with welding sleeve to factory standard (G3/4A, G1A) - flush-mounted with welding neck to factory standard (1 inch), sensor can be positioned - Triclamp 1-1/2 inch, 2 inch to ISO 2852 - threaded pipe joint DN32, DN40, DN50 to DIN 1185 - aseptic connection DN50 to DIN 11864-1 form A for pipe DIN 11850 - SMS connection 2 inch (DN51) - DRD flange, 65 mm - Varivent^® DN50 (50/40) to factory standard Tuchenhagen - flanges to EN 1092-1 from DN25, to ANSI B 16.5 from 1 inch, to JIS B 2238 (RF) from DN25 For further information see type code.
Data for application in connection with hazardous areas
EU-Type Examination Certificate		see instruction manuals (SI)
International approvals
FM approval		see control drawings (ZD)
CSA approval		see control drawings (ZD)
IECEx approval		see instruction manuals (SI)
Certificates and approvals
SIL classification		up to SIL2 acc. to IEC 61508
Overspill protection		see approval (ZE)
Accessories
Designation		see technical information (TI)

Датчик предельной вибрации Vibration Limit Switch LVL-M2 Pepperl+Fuchs

Каталожный номер: 270755

General specifications
Function principle		limit detection Maximum or minimum detection in tanks or pipelines containing all types of liquids including use in explosion hazardous areas. Particularly suited to very aggressive liquids thanks to high degree of corrosion protection.
Measuring method		The forks of the sensors vibrate at their intrinsic frequency. This frequency is reduced when covered with liquid. The change in frequency then activates the limit switch.
Construction type		compact device
Supply
Rated voltage		electronic insert FEL50A (PA): 9 ... 32 V DC electronic insert FEL51 (AC): 253 V AC, 50/60 Hz electronic insert FEL52 (E5): 10 ... 55 V DC electronic insert FEL54 (WA): 19 ... 253 V AC, 50/60 Hz or 19 ... 55 V DC electronic insert FEL55 (SI): 11 ... 36 V DC, PLC electronic insert FEL56 (N1), FEL58 (N2): isolating amplifier acc. to EN 60947-5-6 (NAMUR)
Current consumption		electronic insert FEL52 (E5): max. 15 mA
Electrical specifications
Surge protection		electronic insert FEL51 (AC), electronic insert FEL52 (E5), electronic insert FEL54 (WA), electronic insert FEL55 (SI): overvoltage category III
Input
Switching point		see section switch point
Measured variable		limit level (limit value)
Measurement range		depends on mounting point
Output
Switching delay		when fork is covered: approx. 0.5 s, when fork is exposed: approx. 1.0 s (other switching times on request) additionally configurable for PROFIBUS PA (electronic insert FEL50A (PA)): 0.5 ... 60 s
Switch behaviour		switch-over for minimum/maximum residual current safety on electronic insert MAX = maximum safety: The output switches to the power fail response when the fork is covered. for use with overspill protection for example MIN = minimum safety: The output switches to the power fail response when the fork is exposed. for use with dry running protection for example When switching on the power supply the output assumes the alarm signal. After max. 2 s it assumes the correct switching mode.
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Vibration resistance		EN 60068-2-6
Climate class		DIN EN 60068-2-38/IEC 68-2-38
Measurement accuracy
Reference operating conditions		ambient temperature: 23 °C (73.4 °F), medium temperature: 23 °C (73.4 °F), product density: 1 g/cm³ (water), viscosity: 1 mm²/s, medium pressure p_e: 0 bar, sensor mounting: vertical from above, density switch: to > 0.7 g/cm³
Maximum measured error		max. ± 1 mm, specified by mounting position
Non-repeatability		0.1 mm
Hysteresis		approx. 2 mm
Influence of medium density		max. +4.8 ... -3.5 mm (0.5 ... 1.5 g/cm³)
Influence of medium temperature		max. +1.4 ... -2.8 mm (-40 ... 150 °C (-40 ... 302 °F))
Influence of medium pressure		max. 0 ... -2.5 mm (-1 ... 64 bar)
Operating conditions
Installation conditions
	Installation position	with short pipe (up to 500 mm (19.7 inch)) any position, with long pipe vertical
Process conditions
	Medium temperature	-50 ... 150 °C (-58 ... 302 °F) , exceptions see process connections
	Medium pressure	p_e = -1 ... 64 bar (-14.5 ... 928.3 psi) over the entire temperature range , exceptions see process connections
	Test pressure	max. 100 bar (1.5 times the medium pressure p_e), no function during test pressure, burst pressure of diaphragm 200 bar
	Thermal shock resistance	max. 120 °C/s (max. 120 K/s)
	State of aggregation	liquid
	Density	min. 0.5 g/cm³ (compact housing 0.7 g/cm³), other density settings on request
	Viscosity	max. 10000 mm²/s (max. 10000 cSt)
	Solid contents	< &empty5 mm
Ambient conditions
Ambient temperature		-50 ... 70 °C (-58 ... 158 °F) , function with reduced data values see section ambient temperature
Storage temperature		-50 ... 80 °C (-58 ... 176 °F)
Vibration resistance		10 ... 50 Hz, 0.15 mm, 100 cycles
Mechanical specifications
Degree of protection		polyester, steel, and aluminum housing: IP66/IP67 compact housing: - IP65 with valve connector PG11 or 1/2NPT - IP66/IP68 with M12 x 1 connector without LEDs (1.4435/316L) - IP69K with M12 x 1 connector with LEDs (1.4435/316L)
Connection		electronic inserts: cross section max. 2.5 mm², lace in end splice in acc. with DIN 46228 ground lead in housing: cross section max. 2.5 mm² external equipotential bonding: cross section 4 mm²
Material		wetted parts: - process connection and extension tube: 1.4435/316L or 2.4610/Alloy C4 - vibration fork: 1.4435/316L or 2.4610/Alloy C4 - flat seal for process connection G2* or G3*: elastomer fibre, asbestos-free housings: - polyester housing: PBT-FR with PBT-FR cover or with PA12 cover with sight glass, cover seal: EPDM - stainless steel housing: 1.4435/316L, cover seal: silicone - aluminum housing: EN-AC-AlSi10Mg, plastic-coated, cover seal: EPDM - compact housing with valve connector or M12 connector: 1.4435/316L cable gland: polyamide or brass, nickel-plated temperature spacer: 1.4435/316L flameproof bushing: 1.4435/316L
Surface quality		R_a < 3.2 µm/80 grit: length, spacer, bushings A, B, *E
Mass		600 g , basic weight: compact sensor, electronic insert, stainless steel housing, process connection G2, additional weight is dependent on housing and process connection process connections: - A31 1000 g, A4 1200 g, A5* 1500 g, A6* 2400 g, A72 4800 g, A81 4900 g, A82 6800 g, A91 7000 g, A92 11,5 kg, A93 17,3 kg - - C45 1400 g, C51 1200 g, C71 1600 g, C75 3200 g, C95 5900 g, CA3 5600 g - D45 1400 g, D51 1200 g, D71 1600 g, D75 3200 g, D95 5900 g, DA3 5600 g - F45 1400 g, F51 1200 g, F55 2000 g, F61 1400 g, F65 2400 g, F71 1600 g, F75 3200 g, F7F 2600 g, F81 2400 g, F85 4300 g, F93 4800 g, F95 5900 g, FA3 5600 g, FA5 7500 g - G3* 200 g - J13 no information, J16 no information, J17 1700 g, J19 no information, J1A no information, J1C 1700 g - N3* 200 g, N75 2900 g - R3* 200 g - T51 no information, T61 100 g extension tube, tempeprature spacers, flameproof bushings: - B* 900 g/m, C* 2300 g/100 inch - D* 100 g - J* 900 g/m and 600 g, K* 2300 g/100 inch and 600 g - L* 700 g - R* 900 g/m and 700 g, S* 2300 g/100 inch and 700 g - T* 800 g
Dimensions		housing: diameter max. 85 mm, height max. 173 mm temperature separator, flameproof bushing: additional length L 140 mm process connection: length L 66.5 ... 80 mm extension: length type II, for vertical installation from above same switching point as Vibracon LVL1, LVL2 vibration fork: width 17.5 mm, fork width 10 mm, length 25 mm
Process connection		- cylindrical thread G3/4A, G1A to DIN ISO 228/1 with flat seal to DIN 7603 - conical thread R3/4, R1 to DIN 2999, part 1 - conical thread 3/4NPT, 1NPT to ANSI B 1.20.1 - flush-mounted with welding sleeve to factory standard (G3/4A, G1A) - Triclamp 1-1/2 inch, 2 inch to ISO 2852 - flanges to EN 1092-1 from DN25, to ANSI B 16.5 from 1 inch, to JIS B 2238 (RF) from DN25 For further information see type code.
Data for application in connection with hazardous areas
EU-Type Examination Certificate		see instruction manuals (SI)
International approvals
FM approval		see control drawings (ZD)
CSA approval		see control drawings (ZD)
IECEx approval		see instruction manuals (SI)
Certificates and approvals
SIL classification		up to SIL2 acc. to IEC 61508
Overspill protection		see approval (ZE)
Accessories
Designation		see technical information (TI)

Индуктивный датчик Inductive sensor NBB15-30GM60-A0 Pepperl+Fuchs

Каталожный номер: 85975

General specifications
Switching function		complementary
Output type		NPN
Rated operating distance		15 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 12.15 mm
Reduction factor r_Al		0.3
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.75
Nominal ratings
Operating voltage		10 ... 30 V
Switching frequency		0 ... 200 Hz
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		&le 3 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA typ. 0.1 µA at 25 °C
No-load supply current		&le 25 mA
Switching state indicator		all direction LED, yellow
Functional safety related parameters
MTTF_d		820 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated &le36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		cable PVC , 2 m
Core cross-section		0.34 mm²
Housing material		brass, nickel-plated
Sensing face		PBT
Housing diameter		30 mm
Degree of protection		IP67

Датчик предельной вибрации Vibration Limit Switch LVL-M2C Pepperl+Fuchs

Каталожный номер: 271511

General specifications
Function principle		limit detection Maximum or minimum detection in tanks or pipelines containing all types of liquids including use in explosion hazardous areas. Particularly suited to very aggressive liquids thanks to high degree of corrosion protection.
Measuring method		The forks of the sensors vibrate at their intrinsic frequency. This frequency is reduced when covered with liquid. The change in frequency then activates the limit switch.
Construction type		device with extension tube, coated with ECTFE
Supply
Rated voltage		electronic insert FEL50A (PA): 9 ... 32 V DC electronic insert FEL51 (AC): 253 V AC, 50/60 Hz electronic insert FEL52 (E5): 10 ... 55 V DC electronic insert FEL54 (WA): 19 ... 253 V AC, 50/60 Hz or 19 ... 55 V DC electronic insert FEL55 (SI): 11 ... 36 V DC, PLC electronic insert FEL56 (N1), FEL58 (N2): isolating amplifier acc. to EN 60947-5-6 (NAMUR)
Current consumption		electronic insert FEL52 (E5): max. 15 mA
Electrical specifications
Surge protection		electronic insert FEL51 (AC), electronic insert FEL52 (E5), electronic insert FEL54 (WA), electronic insert FEL55 (SI): overvoltage category III
Input
Switching point		see section switch point
Measured variable		limit level (limit value)
Measurement range		depends on mounting point and pipe extension up to 3000 mm , larger sizes on request
Output
Switching delay		when fork is covered: approx. 0.5 s, when fork is exposed: approx. 1.0 s (other switching times on request) additionally configurable for PROFIBUS PA (electronic insert FEL50A (PA)): 0.5 ... 60 s
Switch behaviour		switch-over for minimum/maximum residual current safety on electronic insert MAX = maximum safety: The output switches to the power fail response when the fork is covered. for use with overspill protection for example MIN = minimum safety: The output switches to the power fail response when the fork is exposed. for use with dry running protection for example When switching on the power supply the output assumes the alarm signal. After max. 2 s it assumes the correct switching mode.
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Vibration resistance		EN 60068-2-6
Climate class		DIN EN 60068-2-38/IEC 68-2-38
Measurement accuracy
Reference operating conditions		ambient temperature: 23 °C (73.4 °F), medium temperature: 23 °C (73.4 °F), product density: 1 g/cm³ (water), viscosity: 1 mm²/s, medium pressure p_e: 0 bar, sensor mounting: vertical from above, density switch: to > 0.7 g/cm³
Maximum measured error		max. ± 1 mm, specified by mounting position
Non-repeatability		0.1 mm
Hysteresis		approx. 2 mm
Influence of medium density		max. +4.8 ... -3.5 mm (0.5 ... 1.5 g/cm³)
Influence of medium temperature		max. 1.4 ... -2.8 mm (-40 ... 120 °C (-40 ... 248 °F))
Influence of medium pressure		max. 0 ... -2 mm (0 ... 40 bar)
Operating conditions
Installation conditions
	Installation position	with short pipe (up to 500 mm (19.7 inch)) any position, with long pipe vertical
Process conditions
	Medium temperature	-50 ... 150 °C (-58 ... 302 °F) , exceptions see process connections
	Medium pressure	p_e = -1 ... 40 bar (-14.5 ... 580.2 psi) over the entire temperature range , exceptions see process connections
	Test pressure	max. 100 bar (1.5 times the medium pressure p_e), no function during test pressure, burst pressure of diaphragm 200 bar
	Pressure surge	max. 20 bar/s
	Thermal shock resistance	max. 120 °C/s
	State of aggregation	liquid
	Density	min. 0.5 g/cm³ , other density settings on request
	Viscosity	max. 10000 mm²/s
	Solid contents	< &empty5 mm
Ambient conditions
Ambient temperature		-50 ... 70 °C (-58 ... 158 °F) , function with reduced data values see section ambient temperature
Storage temperature		-50 ... 80 °C (-58 ... 176 °F)
Vibration resistance		10 ... 50 Hz, 0.15 mm, 100 cycles
Mechanical specifications
Degree of protection		polyester, steel, and aluminum housing: IP66/IP67
Connection		electronic inserts: cross section max. 2.5 mm², lace in end splice in acc. with DIN 46228 ground lead in housing: cross section max. 2.5 mm² external equipotential bonding: cross section 4 mm²
Material		wetted parts: - process connection and extension pipe: 1.4435/316L with ECTFE coating - vibration fork: 1.4435/316L with ECTFE coating housings: - polyester housing: PBT-FR with PBT-FR cover or with PA12 cover with sight glass, cover seal: EPDM - stainless steel housing: 1.4301/304, cover seal: silicone - aluminum housing: EN-AC-AlSi10Mg, plastic-coated, cover seal: EPDM cable gland: polyamide or brass, nickel-plated temperature spacer: 1.4435/316L flameproof bushing: 1.4435/316L
Surface quality		R_a < 3.2 µm
Mass		800 g , basic weight: compact version (length type II), electronic insert, plastic housing, without flange, additional weight is dependent on extension tube, housing and process connection process connections: - A3H 1000 g, A5H 1500 g, A6H 2400 g, A6I 3200 g, A8H 4900 g - H35 1400 g, H65 2400 g, H71 1600 g, H75 3200 g, H95 5900 g, HA3 5600 g - J1H 1700 g extension tube, temperature spacer, flameproof bushing: - BK* 900 g/m - CK* 2300 g/100 in - DKA 100 g, DKB 700 g, DKC 800 g
Dimensions		housing: diameter max. 85 mm, height max. 173 mm temperature separator, flameproof bushing: additional length L 140 mm process connection: length L min. 115 mm extension: any length L from 148 ... 3000 mm, larger sizes on request extension: length type II, for vertical installation from above same switching point as Vibracon LVL2 vibration fork: width 20.6 mm, fork width 6.5 mm, length 25 mm
Process connection		flanges to EN 1092-1 from DN25, to ANSI B 16.5 from 1 inch, to JIS B 2238 (RF) from DN50 For further information see type code.
Data for application in connection with hazardous areas
EU-Type Examination Certificate		see instruction manuals (SI)
International approvals
FM approval		see control drawings (ZD)
CSA approval		see control drawings (ZD)
IECEx approval		see instruction manuals (SI)
Certificates and approvals
SIL classification		up to SIL2 acc. to IEC 61508
Overspill protection		see approval (ZE)
Accessories
Designation		see technical information (TI)

Датчик предельной вибрации Vibration Limit Switch LVL-M2H Pepperl+Fuchs

Каталожный номер: 271509

General specifications
Function principle		limit detection Maximum or minimum detection in tanks or pipelines containing all types of liquids including use in explosion hazardous areas. Particularly suited to very aggressive liquids thanks to high degree of corrosion protection.
Measuring method		The forks of the sensors vibrate at their intrinsic frequency. This frequency is reduced when covered with liquid. The change in frequency then activates the limit switch.
Construction type		device with extension tube
Supply
Rated voltage		electronic insert FEL50A (PA): 9 ... 32 V DC electronic insert FEL51 (AC): 253 V AC, 50/60 Hz electronic insert FEL52 (E5): 10 ... 55 V DC electronic insert FEL54 (WA): 19 ... 253 V AC, 50/60 Hz or 19 ... 55 V DC electronic insert FEL55 (SI): 11 ... 36 V DC, PLC electronic insert FEL56 (N1), FEL58 (N2): isolating amplifier acc. to EN 60947-5-6 (NAMUR)
Current consumption		electronic insert FEL52 (E5): max. 15 mA
Electrical specifications
Surge protection		electronic insert FEL51 (AC), electronic insert FEL52 (E5), electronic insert FEL54 (WA), electronic insert FEL55 (SI): overvoltage category III
Input
Switching point		see section switch point
Measured variable		limit level (limit value)
Measurement range		depends on mounting point and pipe extension up to 3000 mm , larger sizes on request
Output
Switching delay		when fork is covered: approx. 0.5 s, when fork is exposed: approx. 1.0 s (other switching times on request) additionally configurable for PROFIBUS PA (electronic insert FEL50A (PA)): 0.5 ... 60 s
Switch behaviour		switch-over for minimum/maximum residual current safety on electronic insert MAX = maximum safety: The output switches to the power fail response when the fork is covered. for use with overspill protection for example MIN = minimum safety: The output switches to the power fail response when the fork is exposed. for use with dry running protection for example When switching on the power supply the output assumes the alarm signal. After max. 2 s it assumes the correct switching mode.
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529
Vibration resistance		EN 60068-2-6
Climate class		DIN EN 60068-2-38/IEC 68-2-38
Measurement accuracy
Reference operating conditions		ambient temperature: 23 °C (73.4 °F), medium temperature: 23 °C (73.4 °F), product density: 1 g/cm³ (water), viscosity: 1 mm²/s, medium pressure p_e: 0 bar, sensor mounting: vertical from above, density switch: to > 0.7 g/cm³
Maximum measured error		max. ± 1 mm, specified by mounting position
Non-repeatability		0.1 mm
Hysteresis		approx. 2 mm
Influence of medium density		max. +4.8 ... -3.5 mm (0.5 ... 1.5 g/cm³)
Influence of medium temperature		max. +1.4 ... -2.8 mm (-40 ... 150 °C (-40 ... 302 °F))
Influence of medium pressure		max. 0 ... -2.5 mm (-1 ... 64 bar)
Operating conditions
Installation conditions
	Installation position	with short pipe (up to 500 mm (19.7 inch)) any position, with long pipe vertical
Process conditions
	Medium temperature	-50 ... 150 °C (-58 ... 302 °F) , exceptions see process connections
	Medium pressure	p_e = -1 ... 64 bar (-14.5 ... 928.3 psi) over the entire temperature range , exceptions see process connections
	Test pressure	max. 100 bar (1.5 times the medium pressure p_e), no function during test pressure, burst pressure of diaphragm 200 bar
	Thermal shock resistance	max. 120 °C/s (max. 120 K/s)
	State of aggregation	liquid
	Density	min. 0.5 g/cm³ (compact housing 0.7 g/cm³), other density settings on request
	Viscosity	max. 10000 mm²/s (max. 10000 cSt)
	Solid contents	< &empty5 mm
Ambient conditions
Ambient temperature		-50 ... 70 °C (-58 ... 158 °F) , function with reduced data values see section ambient temperature
Storage temperature		-50 ... 80 °C (-58 ... 176 °F)
Vibration resistance		10 ... 50 Hz, 0.15 mm, 100 cycles
Mechanical specifications
Degree of protection		polyester, steel, and aluminum housing: IP66/IP67 compact housing: - IP65 with valve connector PG11 or 1/2NPT - IP66/IP68 with M12 x 1 connector without LEDs (1.4435/316L) - IP69K with M12 x 1 connector with LEDs (1.4435/316L)
Connection		electronic inserts: cross section max. 2.5 mm², lace in end splice in acc. with DIN 46228 ground lead in housing: cross section max. 2.5 mm² external equipotential bonding: cross section 4 mm²
Material		wetted parts: - process connection and extension tube: 1.4435/316L - vibration fork: 1.4435/316L - flat seal for process connection G2* or G3*: elastomer fibre, asbestos-free housings: - polyester housing: PBT-FR with PBT-FR cover or with PA12 cover with sight glass, cover seal: EPDM - stainless steel housing: 1.4435/316L, cover seal: silicone - aluminum housing: EN-AC-AlSi10Mg, plastic-coated, cover seal: EPDM - compact housing with valve connector or M12 connector: 1.4435/316L cable gland: polyamide or brass, nickel-plated temperature spacer: 1.4435/316L flameproof bushing: 1.4435/316L
Surface quality		R_a < 1.5 µm/120 grit: length, spacer, bushings C R_a < 0.3 µm/320 grit: length, spacer, bushings D
Mass		700 g , basic weight: compact sensor, electronic insert, stainless steel housing, process connection G2, additional weight is dependent on extension tube, housing and process connection process connections: - A31 1000 g, A41 1200 g, A51 1500 g, A6 2400 g, A72 4800 g, A81 4900 g, A82 6800 g, A91 7000 g, A92 11.5 kg - D75 3200 g, D95 5900 g, DA3 5600 g, D7A 300 g, D7D 300 g - F45 1400 g, F51 1200 g, F55 2000 g, F61 1400 g, F65 2400 g, F71 1600 g, F75 3200 g, F81 2400 g, F85 4300 g, F93 4800 g, F95 5900 g, FA3 5600 g, FA5 7500 g - G3E 200 g - J13 no information, J16 no information, J17 1700 g, J19 no information, J1A no information, J1C 1700 g - RR no information - S13 300 g, S61 200 g, SV1 no information - T51 no information, T61 100 g extension tube, tempeprature spacers, flameproof bushings: - B 900 g/m, C* 2300 g/100 inch - D* 100 g - J* 900 g/m and 600 g, K* 2300 g/100 inch and 600 g - L* 700 g - R* 900 g/m and 700 g, S* 2300 g/100 inch and 700 g - T* 800 g
Dimensions		housing: diameter max. 85 mm, height max. 173 mm temperature separator, flameproof bushing: additional length L 140 mm process connection: length L 55.5 ... 80 mm extension: any length L from 148 ... 3000 mm, larger sizes on request extension: length type II, for vertical installation from above same switching point as Vibracon LVL1, LVL2 vibration fork: width 17.5 mm, fork width 10 mm, length 25 mm
Process connection		- cylindrical thread G3/4A, G1A to DIN ISO 228/1 with flat seal to DIN 7603 - conical thread R3/4, R1 to DIN 2999, part 1 - flush-mounted with welding sleeve to factory standard (G3/4A, G1A) - flush-mounted with welding neck to factory standard (1 inch), sensor can be positioned - Triclamp 1-1/2 inch, 2 inch to ISO 2852 - threaded pipe joint DN32, DN40, DN50 to DIN 1185 - aseptic connection DN50 to DIN 11864-1 form A for pipe DIN 11850 - SMS connection 2 inch (DN51) - DRD flange, 65 mm - Varivent^® DN50 (50/40) to factory standard Tuchenhagen - flanges to EN 1092-1 from DN25, to ANSI B 16.5 from 1 inch, to JIS B 2238 (RF) from DN25 For further information see type code.
Data for application in connection with hazardous areas
EU-Type Examination Certificate		see instruction manuals (SI)
International approvals
FM approval		see control drawings (ZD)
CSA approval		see control drawings (ZD)
IECEx approval		see instruction manuals (SI)
Certificates and approvals
SIL classification		up to SIL2 acc. to IEC 61508
Overspill protection		see approval (ZE)
Accessories
Designation		see technical information (TI)

Индуктивный датчик Inductive sensor NBB15-30GM60-A0-V1 Pepperl+Fuchs

Каталожный номер: 85976

General specifications
Switching function		complementary
Output type		NPN
Rated operating distance		15 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 12.15 mm
Reduction factor r_Al		0.3
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.75
Nominal ratings
Operating voltage		10 ... 30 V
Switching frequency		0 ... 200 Hz
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		&le 3 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA typ. 0.1 µA at 25 °C
No-load supply current		&le 25 mA
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		820 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated &le36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		Connector M12 x 1 , 4-pin
Housing material		brass, nickel-plated
Sensing face		PBT
Housing diameter		30 mm
Degree of protection		IP67

Датчик предельной проводимости Conductive Level Limit Switch LKL-P* Pepperl+Fuchs

Каталожный номер: T33194

Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2006 , EN 61326-2-3:2006
Low voltage
	Directive 2014/35/EU	EN 61010-1:2001
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529:2001
Vibration resistance		EN 60068-2-64
Climate class		EN 60068, part 2-38 (test Z/AD)
Function and system design
Measuring principle		An alternating voltage exists between the probes in an empty tank. As soon as the conductive liquid in the tank creates a connection between the ground probe and, for example, the maximum probe, a measurable current flows and the device switches. With level limit detection, the device switches back as soon as the liquid clears the maximum probe. With two-point control, the device does not switch back until the max and min probe is cleared. Using alternating voltage prevents corrosion of the probes and electrolytic destruction of the product. The material used for the tank walls is not important for measurement because the system is designed as a closed potential-free circuit between the probes and the electronics. There is absolutely no danger if the probes are touched during operation.
Equipment architecture		probe with integrated electronic insert (compact instrument version) probe without integrated electronic insert (separate instrument version) for one, two or multiple point detection respectively, see section measuring system
Input characteristics
Measured variable		resistance change between two conductors caused by the presence or absence of a conductive product.
Measurement range		The measuring range is dependent on the mounting location of the probes. Rod probes can have a max. length of 4000 mm (13 ft) and rope probes up to 15000 mm (49 ft).
Output characteristics
Output signal		see section electrical connection
Measurement range		A total of four measuring ranges (100 &Omega, 1 k&Omega, 10 k&Omega, 100 k&Omega) can be set via two DIL switches (SENS). The setting on delivery is 100 k&Omega.
Auxiliary energy
Electrical connection		see section electrical connection
Supply voltage		Output E5 (FEW52): supply voltage 10.8 ... 45 V DC load connection: open collector PNP switching voltage: max. 45 V Output WA (FEW54): supply voltage 20 ... 55 V DC or 20 ... 253 V AC, 50/60 Hz peak inrush current: max. 2 A, max. 400 µs output: two potential-free change-over contacts output N1 (FEW58): refer to datasheet of the connected switch amplifier acc. to IEC 60947-5-6 (NAMUR)
Power consumption		Output E5 (FEW52): P < 1.1 W output WA (FEW54): P < 2.0 W
Current consumption		Output E5 (FEW52): I < 25 mA (without load) output WA (FEW54): 60 mA
Measurement accuracy
Reference operating conditions		ambient temperature: 23 °C (296 K), medium temperature: 23 °C (296 K), medium viscosity: medium must release the probe again (drain off), medium pressure pe: 0 bar, probe installation: vertically from above
Maximum measured error		± 10 % at 0.1 ... 100 k&Omega ± 5 % at 1 ... 10 k&Omega
Non-repeatability		± 5 % at 0.1 ... 100 k&Omega ± 1 % at 1 ... 10 k&Omega
Hysteresis		-10 % for the max probe, in reference to the switch point, &Deltas function deactivated
Influence of ambient temperature		< 0.05 %/K
Switching time		< 3 s
Operating conditions
Installation conditions
	Mounting location	The rod and rope probes are mounted predominantly in tanks made of plastic or metal.
	Mounting examples	see section example applications
Ambient conditions
	Ambient temperature	-40 ... 70 °C (-40 ... 158 °F) -40 ... 60 °C (233 ... 333 K) for output N1 (FEW58)
	Storage temperature	-40 ... 80 °C (-40 ... 176 °F)
	Climate class	tropicalized
	Shock resistance	practical test
	Vibration resistance	20 ... 2000 Hz, 1 (m/s²)²/Hz
Process conditions
	Medium temperature	-40 ... 100 °C (-40 ... 212 °F)
	Medium pressure	-1 ... 10 bar (-14.5 ... 145 psi)
	Conductivity	&ge 10 µS
Mechanical specifications
Degree of protection		IP66
Data for application in connection with hazardous areas
EC-Type Examination Certificate		TÜV 03 ATEX 2295
	Group, category, type of protection	II 2G Ex ia/ib IIC T4
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2009 , EN 60079-11:2007
Mechanical construction
Dimensions		LKL-P1: - housing: max. Ø85 mm (3.3 inch), height max. 145 mm (5.7 inch) - rod: length 100 ... 4000 mm (4 in ... 13 ft) LKL-P2: - housing: max. Ø85 mm (3.3 inch), height max. 145 mm (5.7 inch) - rope: length 250 ... 15000 mm (10 in ... 49 ft)
Mass		separate instrument version: - rod, 1 m (3 ft) long, LKL-P1 with 2, 3 or 5 rods: 415 g, 530 g, 760 g - rope, 1 m (3 ft) long, LKL-P2 with 2, 3 or 5 ropes: 390 g, 470 g, 640 g compact instrument version: - rod, 1 m (3 ft) long, LKL-P1 with 2 or 3 rods (600 g/720 g) - rope, 1 m (3 ft) long, LKL-P2 with 2 or 3 ropes (710 g/800 g)
Material		probes: - rods: rod 1.4404/316L, insulation: PP - ropes: rope 1.4571/316Ti, insulation FEP, weight 1.4435/316L housing: - output NA (separate instrument version): housing PPS, cover PBT - output E5/WA/N1 (compact instrument version): housing PBT, cover PBT, adapter PBT process connections: PPS
Certificates and approvals
Overspill protection		see approval (ZE)

Датчик предельной ёмкости Capacitive limit switch LCL1 Pepperl+Fuchs

Каталожный номер: 271947

General specifications
Measuring method		A metal plate at the end of the probe, within the insulation, and the surroundings (e. g. the silo walls) combine to form the two electrodes of a capacitor. If the probe is covered or free of material, then the capacitance changes and the LCL switches.
Equipment architecture		The measuring system consists of: - the device - a supply point - the connected control systems, switching units, signalling systems (e. g. lamps, horns, PCS, PLC, etc.)
Construction type		device with rod probe
Operating mode		MAX = maximum safety: The device switches if the probe is covered or if the supply voltage is disconnected in a safety-oriented manner (signal on alarm). example application: overspill protection MIN = minimum safety: The device switches if the probe is uncovered or if the supply voltage is disconnected in a safetyoriented manner (signal on alarm). example application: dry-running protection
Supply
Rated voltage		electrical connection E5: 10.8 ... 45 V DC, short-term pulse on 55 V DC electrical connection WA: 20 ... 235 V AC, 50/60 Hz or 20 ... 55 V DC
Current consumption		electrical connection E5: max. 30 mA, reverse-polarity-proof electrical connection WA: max. 130 mA
Electrical specifications
Surge protection		overvoltage category III
Input
Measured variable		limit level (limit value)
Measurement range		dielectric constant &ge 1.6
Output
Output signal		connection E5: switching PNP, I_max = 200 mA - overload and short circuit protection - residual voltage at transistor at I_max < 2.9 V connection WA: contact change-over, potential-free - U_max = 253 V - I_max = 4 A (AC) - P_max = 1000 VA, cos &phi = 1, P_max = 500 VA, cos &phi > 0.7
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2006 , EN 61326-2-3:2006
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529:2001
Vibration resistance		EN 60068-2-64
Climate class		EN 60068, part 2-38 (test Z/AD)
Measurement accuracy
Reference operating conditions		vessel type: plastic vessel, ambient temperature: 73 °F (23 °C, 296 K), medium temperature: 73 °F (23 °C, 296 K) medium pressure p_e: 0 bar, medium: dielectric constant = 2.6, conductivity: < 1 µS sensitivity setting: C
Hysteresis		horizontal 4 mm (0.16 inch), vertical 7 mm (0.28 inch)
Long-term drift		horizontal 3 mm (0.12 inch), vertical 6 mm (0.24 inch)
Influence of medium temperature		depending on the filling material
Switching time		approx. 0.5 s when covering and uncovering the sensor
Operating conditions
Installation conditions
	Installation position	any position
	Mounting location	The capacitive limit switch can be installed in silos made of different materials (e. g. metal, plastic, concrete).
Process conditions
	Process temperature	-40 ... 130 °C (-40 ... 266 °F) -40 ... 80 °C (-40 ... 176 °F) (Dust-Ex version)
	Medium pressure limits	-1 ... 25 bar
	State of aggregation	fluids and solids
	Solid contents	&le &empty 30 mm
	Bulk density	&le 200 g/l
Ambient conditions
Ambient temperature		-40 ... 80 °C (-40 ... 176 °F) -40 ... 60 °C (-40 ... 140 °F) (Dust-Ex version)
Storage temperature		-40 ... 80 °C (-40 ... 176 °F)
Shock resistance		device with F34 housing: 7 J
Vibration resistance		a(RMS) = 50 m/s², ASD = 1.25 (m/s²)²/Hz, f = 5 to 2000 Hz, t = 3 x 2 h
Mechanical specifications
Degree of protection		IP66, NEMA 4
Connection		gland M20 thread G1/2, NPT1/2
Material		F14 housing: polyester PBT-FR F34 housing F34: aluminum Probe: PPS GF40
Dimensions		max. &empty94 mm (3.7 inch), length 391 mm (15.4 inch)
Process connection		thread R1 acc. to EN 10226, BSPT, adapter for R1-1/2 and G1-1/2 see accessories thread NPT1 to ANSI B 1.20.1, adapter for NPT1-1/4 see accessories
Data for application in connection with hazardous areas
EU-Type Examination Certificate		see instruction manuals (SI)
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-31:2009
Accessories
Optional accessories		LCL-Z10 cover with sight glass for F14 housing LCL-Z11 adapter for R1-1/2, EN 10226 LCL-Z12 adapter for G1-1/2, DIN ISO 228 LCL-Z13 adapter for NPT1-1/4, steel LCL-Z15 adapter for NPT1-1/4, 1.4571

Датчик предельной ёмкости Capacitive limit switch LCL2 Pepperl+Fuchs

Каталожный номер: 271956

General specifications
Measuring method		A metal plate at the end of the probe, within the insulation, and the surroundings (e. g. the silo walls) combine to form the two electrodes of a capacitor. If the probe is covered or free of material, then the capacitance changes and the LCL switches.
Equipment architecture		The measuring system consists of: - the device - a supply point - the connected control systems, switching units, signalling systems (e. g. lamps, horns, PCS, PLC, etc.)
Construction type		device rope probe
Operating mode		MAX = maximum safety: The device switches if the probe is covered or if the supply voltage is disconnected in a safety-oriented manner (signal on alarm). example application: overspill protection MIN = minimum safety: The device switches if the probe is uncovered or if the supply voltage is disconnected in a safetyoriented manner (signal on alarm). example application: dry-running protection
Supply
Rated voltage		electrical connection E5: 10.8 ... 45 V DC, short-term pulse on 55 V DC electrical connection WA: 20 ... 235 V AC, 50/60 Hz or 20 ... 55 V DC
Current consumption		electrical connection E5: max. 30 mA, reverse-polarity-proof electrical connection WA: max. 130 mA
Input
Measured variable		limit level (limit value)
Measurement range		dielectric constant &ge 1.6
Output
Output signal		connection E5: switching PNP, I_max = 200 mA - overload and short circuit protection - residual voltage at transistor at I_max < 2.9 V connection WA: contact change-over, potential-free - U_max = 253 V - I_max = 4 A (AC) - P_max = 1000 VA, cos &phi = 1, P_max = 500 VA, cos &phi > 0.7
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2006 , EN 61326-2-3:2006
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Electromagnetic compatibility		NE 21
Degree of protection		IEC 60529:2001
Vibration resistance		EN 60068-2-64
Climate class		EN 60068, part 2-38 (test Z/AD)
Measurement accuracy
Reference operating conditions		vessel type: plastic vessel, ambient temperature: 73 °F (23 °C, 296 K), medium temperature: 73 °F (23 °C, 296 K) medium pressure p_e: 0 bar, medium: dielectric constant = 2.6, conductivity: < 1 µS sensitivity setting: C
Hysteresis		vertical 5 mm (0.2 inch)
Long-term drift		vertical 6 mm (0.24 inch)
Influence of medium temperature		depending on the filling material
Switching time		approx. 0.8 s when covering and uncovering the sensor
Operating conditions
Installation conditions
	Installation position	vertically down
	Mounting location	The capacitive limit switch can be installed in silos made of different materials (e. g. metal, plastic, concrete).
Process conditions
	Process temperature	-40 ... 80 °C (-40 ... 176 °F)
	Medium pressure limits	-1 ... 6 bar
	State of aggregation	solids
	Solid contents	&le &empty 30 mm
	Bulk density	&le 200 g/l
Ambient conditions
Ambient temperature		-40 ... 80 °C (-40 ... 176 °F) -40 ... 60 °C (-40 ... 140 °F) (Dust-Ex version)
Storage temperature		-40 ... 80 °C (-40 ... 176 °F)
Shock resistance		device with F34 housing: 7 J
Vibration resistance		a(RMS) = 50 m/s², ASD = 1.25 (m/s²)²/Hz, f = 5 to 2000 Hz, t = 3 x 2 h
Mechanical specifications
Degree of protection		IP66, NEMA 4
Connection		gland M20 thread G1/2, NPT1/2
Material		F14 housing: polyester PBT-FR F34 housing F34: aluminum Probe: PPS GF40 probe rope: PE-HD probe rope seal: VMQ
Dimensions		max. &empty94 mm (3.7 inch), length 140 mm (5.5 inch) + L L = 500 ... 6000 mm (19.7 ... 236 inch)
Process connection		thread R1-1/2 acc. to EN 10226, BSPT thread NPT1-1/2 to ANSI B 1.20.1
Data for application in connection with hazardous areas
EC-Type Examination Certificate		see instruction manuals (SI)
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-31:2009
Accessories
Optional accessories		LCL-Z10 cover with sight glass for F14 housing LCL-Z14 rope shortening set

Индуктивный датчик Inductive sensor NBB15-30GM60-A2-10M Pepperl+Fuchs

Каталожный номер: 122779

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance		15 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 12.15 mm
Reduction factor r_Al		0.3
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.75
Nominal ratings
Operating voltage		10 ... 30 V
Switching frequency		0 ... 200 Hz
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		&le 3 V
Operating current		0 ... 200 mA
Off-state current		0 ... 0.5 mA typ. 0.1 µA at 25 °C
No-load supply current		&le 25 mA
Switching state indicator		all direction LED, yellow
Functional safety related parameters
MTTF_d		1000 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Approvals and certificates
UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated &le36 V
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		cable PVC , 10 m
Core cross-section		0.34 mm²
Housing material		brass, nickel-plated
Sensing face		PBT
Housing diameter		30 mm
Degree of protection		IP67

Датчик предельной ёмкости Capacitive limit switch LCL* Pepperl+Fuchs

Каталожный номер: T2751

Application
Function principle		Limit detection Maximum or minimum detection in silos with all types of solid granulates, even in dust explosion hazardous areas.
Function and system design
Measuring principle		A metal plate at the end of the probe, within the insulation, and the surroundings (e. g. the silo walls) combine to form the two electrodes of a capacitor. If the probe is covered or free of material, then the capacitance changes and the LCL switches.
Input characteristics
Measured variable		limit level (limit value)
Measurement range		LCL1: dielectric constant &ge 1.6 LCL2: dielectric constant &ge 1.5
Output characteristics
Output signal		connection E5: switching PNP, I_max = 200 mA - overload and short circuit protection - residual voltage at transistor at I_max < 2.9 V connection WA: contact change-over, potential-free - U_max = 253 V - I_max = 4 A (AC) - P_max = 1000 VA, cos &phi = 1, P_max = 500 VA, cos &phi > 0.7
Auxiliary energy
Electrical connection		see section electrical connection
Supply voltage		electrical connection E5: 10.8 ... 45 V DC, short-term pulse on 55 V DC electrical connection WA: 20 ... 235 V AC, 50/60 Hz or 20 ... 55 V DC
Current consumption		electrical connection E5: max. 30 mA, reverse-polarity-proof electrical connection WA: max. 130 mA
Measurement accuracy
Reference operating conditions		vessel type: plastic vessel, ambient temperature: 73 °F (23 °C, 296 K), medium temperature: 73 °F (23 °C, 296 K) medium pressure p_e: 0 bar, medium: dielectric constant = 2.6, conductivity: < 1 µS sensitivity setting: C
Hysteresis		LCL1: horizontal 4 mm (0.16 inch), vertical 7 mm (0.28 inch) LCL2: vertical 5 mm (0.2 inch)
Long-term drift		LCL1: horizontal 3 mm (0.12 inch), vertical 6 mm (0.24 inch) LCL2: vertical 6 mm (0.24 inch)
Influence of medium temperature		depending on the filling material
Operating conditions
Installation conditions
	Installation position	LCL1: optional LCL2: vertically down Note the angle of the material mounds and the outlet funnel when determining the mounting point or probe length. The limit switch switches when the probe tip is covered by a few centimetres of material or when it is free material flow should not be directed at the probe.
	Mounting location	The capacitive limit switch can be installed in silos made of different materials (e. g. metal, plastic, concrete).
Ambient conditions
	Ambient temperature	-40 ... 70 °C (-40 ... 158 °F) (-40 ... 140 °F (-40 ... 60 °C, 233 ... 333 K), dust-Ex version) see section temperature ranges
	Ambient temperature limits	-40 ... 80 °C (-40 ... 176 °F) (-40 ... +140 °F (-40 ... +60 °C, 233 ... 333 K), Dust-Ex version) see section temperature ranges , grey background
	Storage temperature	-40 ... 80 °C (-40 ... 176 °F)
	Shock resistance	probe: 7J
	Overvoltage protected	overvoltage category III
Process conditions
	Process temperature	LCL1: -40 ... 120 °C (233 ... 393 K) (-40 ... 80 °C (233 ... 353 K), dust-Ex version) LCL2: -20 ... 70 °C (253 ... 343 K) see section temperature ranges
	Process temperature limits	LCL1: -40 ... 130 °C (233 ... 403 K) (-40 ... 80 °C (233 ... 353 K), dust-Ex version) LCL2: -40 ... 80 °C (233 ... 353 K) see section temperature ranges , grey background
	Medium pressure limits	LCL1: -1 ... 25 bar LCL2: -1 ... 6 bar
Mechanical specifications
Degree of protection		IP66
Mechanical construction
Dimensions		housing: LCL1 Ø94 x 140 mm (3.7 x 5.5 inch), LCL2 Ø94 x 145 mm (3.7 x 5.7 inch) process connections: see section dimensions probe: LCL1 length 140 mm (5.5 inch), LCL2 length 500 ... 6000 mm (1.7 ... 20 ft)
Mass		LCL1: 560 g LCL2: 1230 g (basic weight for 500 mm probe length)
Material		housing: PBT-FR with cover in PBT-FR or with transparent cover in PA12, seal of cover: EPDM cable gland: polyamide or brass, nickel-plated wetted parts: - rod probe: PPS Polyphenylenesulphide (glass fiber content 40 %) - rope probe: armoured steel with HD-PE coating - other probe components: PPS Polyphenylenesulphide (glass fiber content 40 %)
Certificates and approvals
Explosion-hazardous area		LCL1: DMT 01 ATEX E 122, LCL2: KEMA 01 ATEX 1149 , for additional certificates see www.pepperl-fuchs.com
Type of protection		II 1/3D IP66 T97°C (DMT 01 ATEX E122) II 1/3D [EEx ia] IIB T97°C (KEMA 01 ATEX 1149)
Overspill protection		LCL1: Z-65.13-313 (overspill protection in acc. with WHG)

Датчик магнитного погружения Magnetic Immersion Probe for Continuous Measurement LMC-Ex Pepperl+Fuchs

Каталожный номер: T29389

General specifications
Equipment architecture		A measuring system consists of a magnet-operated immersion probe LMC**--I-Ex with built-in converter and a transmitter power supply KFD2-STC4-Ex1 or of a magnet-operated immersion probe LMC*-*-O4-Ex and a potentiometer converter KFD2-PT2-Ex1.
Output
Connection		version I: 2-wire, 4 ... 20 mA version O4: 3-wire, potentiometer connection approx. 40 k&Omega
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61000-6-2:2006 , EN 61000-6-4:2011
Conformity
Degree of protection		IEC 60529:2000
Measurement accuracy
Accuracy		resolution: - version LMC5: 5 mm - version LMC15: 15 mm
Operating conditions
Process conditions
	Process temperature	-20 ... 100 °C (-4 ... 212 °F)
	Process pressure (static pressure)	&le 16 bar (232.1 psi)
	Density	version S1: &ge 0.6 g/cm³ version S2: &ge 0.8 g/cm³ version S3: &ge 0.7 g/cm³
Ambient conditions
Ambient temperature		terminal box: -50 ... 60 °C (-58 ... 140 °F)
Mechanical specifications
Degree of protection		IP65
Connection		Version I: 2 terminals, max. 2.5 mm² Version O4: 3 terminals, max. 2.5 mm²
Material		float, guide tube, process connection: stainless steel 1.4571/316Ti terminal box: aluminum die-casting
Dimensions		float: - version S1: ball &empty80 mm - version S2: cylinder &empty44 mm x 52 mm - version S3: ball &empty52 mm guide tube: - version LMC5: &empty14 mm, max. length 3000 mm - version LMC15: &empty12 mm, max. length 3000 mm terminal box: 80 x 75 x 57 mm
Process connection		thread G1-1/2A, G2A to DIN/ISO 228/1
Data for application in connection with hazardous areas
EC-Type Examination Certificate		KEMA 03 ATEX 1497 X
	Group, category, type of protection, temperature class	II 1/2G EEx ia IIC T4...T6
	Voltage	28 V
	Current	120 mA
	Internal capacitance	0 nF
	Internal inductance	0 µH
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012, EN 60079-11:2012, EN 60079-26:2007
Accessories
Optional accessories		LML-FS1 float, ball, Ø80 mm, 1.4571/316Ti LML-FS4 float, ball, Ø44 mm, 1.4571/316Ti LML-FS5 float, ball, Ø52 mm, Titanium LML-FS6 float, cylinder, Ø44 mm x 52 mm, 1.4571/316Ti

Индуктивный датчик Inductive sensor NBB15-F148P10-E0-M Pepperl+Fuchs

Каталожный номер: 237307

General specifications
Switching function		Normally open (NO)
Output type		NPN
Rated operating distance		15 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 12.15 mm
Reduction factor r_Al		0.45
Reduction factor r_Cu		0.35
Reduction factor r₃₀₄		0.8
Reduction factor r_Brass		0.5
Nominal ratings
Operating voltage		10 ... 60 V DC
Switching frequency		0 ... 30 Hz
Hysteresis		2 ... 20 % ( typ. 10 % )
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		&le 1.5 V
Operating current		0 ... 200 mA
Off-state current		&le 10 µA
No-load supply current		&le 10 mA
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		1259 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Approvals and certificates
E1 Type approval		10R-04
Ambient conditions
Ambient temperature		-40 ... 85 °C (-40 ... 185 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		cable PUR , 2 m
Core cross-section		0.75 mm²
Housing material		anodized aluminum
Sensing face		PBT
Housing diameter		30 mm
Degree of protection		IP67 / IP69K

Датчик давления воздуха Pressure Transmitter LHC-M51 Pepperl+Fuchs

Каталожный номер: 257464

General specifications
Construction type		sensor: silicium sensor metall diaphragm
Supply
Rated voltage		versions for safe area: 11.5 ... 45 V DC, 2-wire 11.5 ... 35 V DC, HART, 2-wire 9 ... 32 V DC, PROFIBUS PA version for hazardous area see safety information (SI)
Input
Measured variable		absolute or relative pressure
Measurement range		0.4 ... 400 bar max. turn down: 100:1
Output
Output signal		4 ... 20 mA , analog , 2-wire 4 ... 20 mA with superimposed digital communication protocol HART 6.0, 2-wire digital communication signal PROFIBUS PA (Profile 3.02)
Communication		4 ... 20 mA HART (standard) PROFIBUS PA (option)
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2006 , EN 61326-2-3:2006 , EN 61326-2-5:2006
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Degree of protection		IEC 60529:2001
Measurement accuracy
Accuracy		reference accuracy: ±0.15 % (standard), ±0.075 % (platinum) The reference accuracy comprises the non-linearity according to limit point setting, hysteresis and non-reproducibility acc. to IEC 60770. The data refer to the calibrated span.
Long-term drift		up to ±0.1 % of upper range limit (URL)/year
Operating conditions
Process conditions
	Medium temperature	-40 ... 125 °C (-40 ... 257 °F) hygienic versions: -40 ... 130 °C (-40 ... 266 °F), 150 °C/1h (302 °F/1h)
Ambient conditions
Ambient temperature		-40 ... 85 °C (-40 ... 185 °F) with display : -20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protection		IP66, NEMA 4X IP68, NEMA 6P (24 hours in water 1.83 m (6 ft) deep) IP69K (with separate housing and FEP cable)
Connection		gland M20 thread M20, G1/2, NPT1/2 device plug M12 HAN7D Harting connector, angled valve connector acc. ISO 4400, cable 5 m
Material		materials in contact with process : 316L, Alloy C, rhodium>gold housing: - die-cast aluminum with protective powder-coating on polyester base, housing F31 - stainless steel AISI 316L (1.4404), housing F15 measuring cell seal: no, welded measuring cell
Process connection		threads ISO 228: G1/2, G1, G1-1/2, G2 threads ANSI: NPT1/2, NPT1, NPT1-1/2, NPT2 hygienic process connections: Clamp, Varivent, DRD, DIN 11851, DIN 11864, NEUMO, APV, uni adapter flanges: EN 1092-1: DN 25 ... DN 80, ANSI 16.5: 1 ... 4 inch, JIS B2220
Data for application in connection with hazardous areas
EU-Type Examination Certificate		see instruction manuals (SI)
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-31:2009
International approvals
FM approval		see instruction manuals (SI)
CSA approval		see instruction manuals (SI)
IECEx approval		see instruction manuals (SI)
Certificates and approvals
Drinking water approval		NSF61 approval
Overspill protection		see approval (ZE)
Marine approval		German Lloyd (GL)
Accessories
Designation		see technical information (TI)

Датчик давления воздуха Pressure Transmitter LHCR-51 Pepperl+Fuchs

Каталожный номер: 257465

Supply
Rated voltage		versions for safe area: 11.5 ... 35 V DC, HART, 2-wire 9 ... 32 V DC, PROFIBUS PA version for hazardous area see safety information (SI)
Input
Measured variable		hydrostatic pressure
Measurement range		0.1 ... 10 bar max. turn down: 100:1
Output
Output signal		4 ... 20 mA with superimposed digital communication protocol HART 6.0, 2-wire digital communication signal PROFIBUS PA (Profile 3.02)
Communication		4 ... 20 mA HART (standard) PROFIBUS PA (option)
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2006 , EN 61326-2-3:2006 , EN 61326-2-5:2006
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Degree of protection		IEC 60529:2001
Measurement accuracy
Accuracy		reference accuracy: 0.2 % (standard), 0.1 % (platinum) The reference accuracy comprises the non-linearity according to limit point setting, hysteresis and non-reproducibility acc. to IEC 60770. The data refer to the calibrated span.
Long-term drift		up to 0.05 % of upper range limit (URL)/year up to 0.125 % of upper range limit (URL)/5 years
Operating conditions
Process conditions
	Medium temperature	-40 ... 85 °C (-40 ... 185 °F)
Ambient conditions
Ambient temperature		-40 ... 85 °C (-40 ... 185 °F) with display : -20 ... 70 °C (-4 ... 158 °F)
Storage temperature		-40 ... 90 °C (-40 ... 194 °F)
Mechanical specifications
Degree of protection		IP66, NEMA 4X IP68, NEMA 6P (24 hours in water 1.83 m (6 ft) deep) IP69K (with separate housing and FEP cable)
Connection		gland M20 thread M20, G1/2, NPT1/2 device plug M12 HAN7D Harting connector, angled valve connector acc. ISO 4400, cable 5 m
Material		process connections: AISI 316L (1.4435 or 1.4404), Alloy C276 (2.4819) housing: - die-cast aluminum with protective powder-coating on polyester base, housing F31 - stainless steel AISI 316L (1.4404), housing F15 rod: AISI 316L (1.4404) or Alloy C276 (2.4819) process isolating diaphragm: Alloy C276 (2.4819), Rhodium Gold Alloy C276, Platinum Gold Alloy C276 sealing measuring cell: welded measuring cell or FKM Viton, EPDM, Kalrez
Process connection		threads ISO 228: G1/2, threads ANSI: NPT1/2 flanges EN 1092-1: DN 40 ... DN 100, flanges ANSI 16.5: 2 ... 4 in, flanges JIS B2220
Data for application in connection with hazardous areas
EU-Type Examination Certificate		see instruction manuals (SI)
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 , EN 60079-31:2009
International approvals
FM approval		see instruction manuals (SI)
CSA approval		see instruction manuals (SI)
IECEx approval		see instruction manuals (SI)
Certificates and approvals
Drinking water approval		NSF61 approval
Overspill protection		see approval (ZE)
Marine approval		German Lloyd (GL)
Accessories
Designation		see technical information (TI)

Индуктивный датчик Inductive sensor NBB15-F148P10-E0-M-150MM-3DT04 Pepperl+Fuchs

Каталожный номер: 246464

General specifications
Switching function		Normally open (NO)
Output type		NPN
Rated operating distance		15 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 12.15 mm
Reduction factor r_Al		0.45
Reduction factor r_Cu		0.35
Reduction factor r₃₀₄		0.8
Reduction factor r_Brass		0.5
Nominal ratings
Operating voltage		10 ... 60 V DC
Switching frequency		0 ... 30 Hz
Hysteresis		2 ... 20 % ( typ. 10 % )
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		&le 1.5 V
Operating current		0 ... 200 mA
Off-state current		&le 10 µA
No-load supply current		&le 10 mA
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		1259 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Approvals and certificates
E1 Type approval		10R-04
Ambient conditions
Ambient temperature		-40 ... 85 °C (-40 ... 185 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		cable with Deutsch connector 150 mm
Connection assembly		Deutsch housing DT 04-3P-P004 Deutsch wedge W3P Deutsch contact 1060-16-0622
Core cross-section		0.75 mm²
Housing material		anodized aluminum
Sensing face		PBT
Housing diameter		30 mm
Degree of protection		IP67 / IP69K

Датчик давления воздуха Pressure Transmitter LHCS-51 Pepperl+Fuchs

Каталожный номер: 257466

Supply
Rated voltage		versions for safe area: 11.5 ... 35 V DC, HART, 2-wire 9 ... 32 V DC, PROFIBUS PA version for hazardous area see safety information (SI)
Input
Measured variable		hydrostatic pressure
Measurement range		0.1 ... 10 bar max. turn down: 100:1
Output
Output signal		4 ... 20 mA with superimposed digital communication protocol HART 6.0, 2-wire digital communication signal PROFIBUS PA (Profile 3.02)
Communication		4 ... 20 mA HART (standard) PROFIBUS PA (option)
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2006 , EN 61326-2-3:2006 , EN 61326-2-5:2006
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Degree of protection		IEC 60529:2001
Measurement accuracy
Accuracy		reference accuracy: 0.2 % (standard), 0.1 % (platinum) The reference accuracy comprises the non-linearity according to limit point setting, hysteresis and non-reproducibility acc. to IEC 60770. The data refer to the calibrated span.
Long-term drift		up to 0.05 % of upper range limit (URL)/year up to 0.125 % of upper range limit (URL)/5 years
Operating conditions
Process conditions
	Medium temperature	PE cable: -10 ... 70 °C (14 ... 158 °F) FEP cable: -10 ... 80 °C (-14 ... 176 °F)
Ambient conditions
Ambient temperature		PE cable: -40 ... 70 °C (-40 ... 158 °F) FEP cable: -40 ... 80 °C (-40 ... 176 °F) with display -20 ... 70 °C (-4 ... 158 °F)
Storage temperature		PE cable: -40 ... 70 °C (-40 ... 158 °F) FEP cable: -40 ... 80 °C (-40 ... 176 °F)
Mechanical specifications
Degree of protection		IP66, NEMA 4X IP68, NEMA 6P (24 hours in water 1.83 m (6 ft) deep) IP69K (with separate housing and FEP cable)
Connection		gland M20 thread M20, G1/2, NPT1/2 device plug M12 HAN7D Harting connector, angled valve connector acc. ISO 4400, cable 5 m
Material		process connections: AISI 316L (1.4435 or 1.4404), Alloy C276 (2.4819) housing: - die-cast aluminum with protective powder-coating on polyester base, housing F31 - stainless steel AISI 316L (1.4404), housing F15 rope: PE cable or FEP cable process isolating diaphragm: Alloy C276 (2.4819), Rhodium Gold Alloy C276, Platinum Gold Alloy C276 sealing measuring cell: welded measuring cell or FKM Viton, EPDM, Kalrez
Process connection		threads ISO 228: G1/2, threads ANSI: NPT1/2 flanges EN 1092-1: DN 40 ... DN 100, flanges ANSI 16.5: 2 ... 4 in, flanges JIS B2220
Data for application in connection with hazardous areas
EU-Type Examination Certificate		see instruction manuals (SI)
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 , EN 60079-31:2009
International approvals
FM approval		see instruction manuals (SI)
CSA approval		see instruction manuals (SI)
IECEx approval		see instruction manuals (SI)
Certificates and approvals
Drinking water approval		NSF61 approval
Overspill protection		see approval (ZE)
Marine approval		German Lloyd (GL)
Accessories
Designation		see technical information (TI)

Датчик давления воздуха Pressure Transmitter PPC-M51 Pepperl+Fuchs

Каталожный номер: 255113

General specifications
Construction type		sensor: ceramic sensor ceramic diaphragm
Supply
Rated voltage		versions for safe area: 11.5 ... 45 V DC, 2-wire 11.5 ... 35 V DC, HART, 2-wire 9 ... 32 V DC, PROFIBUS PA version for hazardous area see safety information (SI)
Input
Measured variable		absolute or relative pressure
Measurement range		0.1 ... 40 bar max. turn down: 100:1
Output
Output signal		4 ... 20 mA , analog , 2-wire 4 ... 20 mA with superimposed digital communication protocol HART 6.0, 2-wire digital communication signal PROFIBUS PA (Profile 3.02)
Communication		4 ... 20 mA HART (standard) PROFIBUS PA (option)
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2006 , EN 61326-2-3:2006 , EN 61326-2-5:2006
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Degree of protection		IEC 60529:2001
Measurement accuracy
Accuracy		reference accuracy: ±0.15 % (standard), ±0.075 % (platinum) The reference accuracy comprises the non-linearity according to limit point setting, hysteresis and non-reproducibility acc. to IEC 60770. The data refer to the calibrated span.
Long-term drift		up to ±0.1 % of upper range limit (URL)/year
Operating conditions
Process conditions
	Medium temperature	-40 ... 100 °C (-40 ... 212 °F) hygienic versions: -40 ... 130 °C (-40 ... 266 °F), 150 °C/1h (302 °F/1h)
Ambient conditions
Ambient temperature		-40 ... 85 °C (-40 ... 185 °F) with display : -20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protection		IP66, NEMA 4X IP68, NEMA 6P (24 hours in water 1.83 m (6 ft) deep) IP69K (with separate housing and FEP cable)
Connection		gland M20 thread M20, G1/2, NPT1/2 device plug M12 HAN7D Harting connector, angled valve connector acc. ISO 4400, cable 5 m
Material		materials in contact with process : Al₂O₃ ceramic (ultrapure 99.9 %) housing: - die-cast aluminum with protective powder-coating on polyester base, housing F31 - stainless steel AISI 316L (1.4404), housing F15 measuring cell seal: Viton, EPDM, NBR, Kalrez
Process connection		threads ISO 228: G1/2, G1, G1-1/2, G2 threads ANSI: NPT1/2, NPT1, NPT1-1/2, NPT2 hygienic process connections: Clamp, Varivent, DRD, DIN 11851, DIN 11864, NEUMO, APV, uni adapter flanges: EN 1092-1: DN 25 ... DN 80, ANSI 16.5: 1 ... 4 inch, JIS B2220
Data for application in connection with hazardous areas
EU-Type Examination Certificate		see instruction manuals (SI)
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-31:2009
International approvals
FM approval		see instruction manuals (SI)
CSA approval		see instruction manuals (SI)
IECEx approval		see instruction manuals (SI)
Certificates and approvals
Drinking water approval		NSF61 approval
Overspill protection		see approval (ZE)
Marine approval		German Lloyd (GL)
Accessories
Designation		see technical information (TI)

Индуктивный датчик Inductive sensor NBB15-F148P10-E2-M-150MM-3DT04 Pepperl+Fuchs

Каталожный номер: 246465

General specifications
Switching function		Normally open (NO)
Output type		PNP
Rated operating distance		15 mm
Installation		flush
Output polarity		DC
Assured operating distance		0 ... 12.15 mm
Reduction factor r_Al		0.45
Reduction factor r_Cu		0.35
Reduction factor r₃₀₄		0.8
Reduction factor r_Brass		0.5
Nominal ratings
Operating voltage		10 ... 60 V DC
Switching frequency		0 ... 30 Hz
Hysteresis		2 ... 20 % ( typ. 3 % )
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop		&le 1.5 V
Operating current		0 ... 200 mA
Off-state current		&le 10 µA
No-load supply current		&le 10 mA
Switching state indicator		LED, yellow
Functional safety related parameters
MTTF_d		1180 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Approvals and certificates
E1 Type approval		10R-04
Ambient conditions
Ambient temperature		-40 ... 85 °C (-40 ... 185 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type		cable with Deutsch connector 150 mm
Connection assembly		Deutsch housing DT 04-3P-P004 Deutsch wedge W3P Deutsch contact 1060-16-0622
Core cross-section		0.75 mm²
Housing material		anodized aluminum
Sensing face		PBT
Housing diameter		30 mm
Degree of protection		IP67 / IP69K

Датчик давления воздуха Level probe LGC2 Pepperl+Fuchs

Каталожный номер: 298582

General specifications
Measuring method		Level control with ceramic measuring cell (dry measuring cell). The pressure acts directly on the rugged ceramic membrane of the device and causes it to move by about max. 0.005 mm. The effects of air pressure on the liquid surface are transferred via a pressure compensating tube through the extension cable to the rear of the ceramic membrane and compensated. Pressure-dependent changes in capacitance caused by membrane movement are measured at the electrodes of the ceramic carrier. The electronics convert the movement into a pressure-proportional signal which is linear to the medium level.
Equipment architecture		As standard, the complete measuring system consists of a level probe and a transmitter power supply unit with a supply voltage of 10.5 to 30 V DC.
Construction type		device with rod probe
Supply
Rated voltage		level probe and Pt100 (optional): - 10.5 ... 35 V DC (non-hazardous area) - 10.5 ... 30 V DC (hazardous area) temperature head transmitter (optional): 8 ... 35 V DC
Current consumption		level probe and Pt100 (optional): max. &le 23 mA, min. &ge 3.6 mA temperature head transmitter (optional): max. &le 25 mA, min. &ge 3.5 mA
Reverse polarity protection		Reverse voltage protection is integrated in the level probe and in the temperature head transmitter changing the polarities has no impact on operation.
Residual ripple		level probe and Pt100 (optional): No impact on the 4 to 20 mA signal up to ±5 % residual ripple within the permitted voltage range. temperature head transmitter (optional): U_ss &ge 5 V at U &ge 13 V, f_max. = 1 kHz
Electrical specifications
Surge protection		level probe and Pt100 (optional): - integrated overvoltage protection acc. to EN 61000-4-5 (500 V symmetrical/1000 V asymmetrical) - overvoltage protection &ge 1.0 kV, external if necessary temperature head transmitter (optional): provide overvoltage protection, externally if necessary
Input
Input signal		level probe: change in capacitance Pt100 (optional): change in resistance temperature head transmitter (optional): Pt100 resistance signal, 4-wire
Measured variable		level probe: hydrostatic pressure of a liquid Pt100 (optional): temperature temperature head transmitter (optional): temperature
Measurement range		level probe: - predefined pressure measuring ranges in bar, see type code - customer-specific measuring ranges, factory-calibrated Pt100 (optional): temperature measurement from -10 ... 70 °C (+14 ... +158 °F)
Output
Output signal		level probe: 4 ... 20 mA, 2-wire for hydrostatic pressure measured value Pt100 (optional): temperature-dependent resistance value temperature head transmitter (optional): 4 ... 20 mA Analog for temperature measured value, 2-wire
Signal range		3.8 ... 20.5 mA
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 , EN 61326-2-3:2013
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Degree of protection		IEC 60529:2001
Measurement accuracy
Resolution		current output: 1 µA
Reference operating conditions		level probe and Pt100 (optional): acc. to IEC 60770, T_amb = constant in the range: +21 ... +33 °C (+70 ... +91 °F) temperature head transmitter (optional): calibration temperature 23 °C (+73 °F) ± 5 K
Accuracy		level probe and Pt100 (optional): The reference accuracy comprises the non-linearity after limit point configuration, hysteresis and non-reproducibility in accordance IEC 60770. - standard version ±0.2 % - platinum version ±0.1 % temperature head transmitter (optional): ± 0.2 K, with Pt100: max. ± 0.9 K
Long-term drift		level probe and Pt100 (optional): - &le 0.1 % of URL/year - &le 0.25 % of URL/5 years temperature head transmitter (optional): &le 0.1 K per year
Influence of medium temperature		thermal change in the zero output and the output span: - 0 ... +30 °C (+32 ... +86 °F): < (0.15 + 0.15 x TD) % of set span - -10 ... +70 °C (+14 ... +158 °F): < (0.4 + 0.4 x TD) % of set span temperature coefficient (T_K) of the zero output and the output span: -10 ... +70 °C (+14 ... +158 °F): 0.1 %/10 K of URL
Warm-up time		level probe: < 6 s Pt100 (optional): 20 m temperature head transmitter (optional): 4 s
Response time		level probe: 400 ms (T90 time), 500 ms (T99 time) Pt100 (optional): 160 s (T90 time), 300 s (T99 time)
Operating conditions
Installation conditions
	Installation position	vertical from above
Process conditions
	Medium temperature	level probe and Pt100 (optional): - Ø22 mm and Ø42 mm: -10 ... +70 °C (+14 ... +158 °F) - Ø29 mm: 0 ... +50 °C (+32 ... +122 °F) temperature head transmitter (optional): -40 ... +85 °C (-40 ... +185 °F) (= ambient temperature), install temperature head transmitter outside the medium.
	Medium temperature limits	level probe and Pt100 (optional): - Ø22 mm and Ø42 mm: -20 ... +70 °C (-4 ... +158 °F) - Ø29 mm: 0 ... +50 °C (+32 ... +122 °F)
Ambient conditions
Ambient temperature		level probe and Pt100 (optional): - Ø22 mm and Ø42 mm: -10 ... +70 °C (+14 ... +158 °F) (= medium temperature) - Ø29 mm: 0 ... +50 °C (+32 ... +122 °F) (= medium temperature) temperature head transmitter (optional): -40 ... +85 °C (-40 ... +185 °F)
Storage temperature		level probe and Pt100 (optional): -40 ... +80 °C (-40 ... +176 °F) temperature head transmitter (optional): -40 ... +85 °C (-40 ... +185 °F)
Mechanical specifications
Degree of protection		level probe and Pt100 (optional): IP68, permanently hermetically sealed, optional terminal box IP66/IP67 temperature head transmitter (optional): IP00, moisture condensation permissible, when mounted in the optional terminal box IP66/IP67
Connection		3 terminals in terminal box (accessory) as standard 4 terminals in terminal block (accessory), conductor cross section 0.08 ... 2.5 mm²
Material		level probe: 1.4435/316L process ceramic: Al₂O₃ (aluminium oxide ceramic) seal (internal): EPDM or Viton protection cap: POM or PFA terminal box: PC (polycarbonate) temperature head transmitter: housing PC (polycarbonate) probe connection insulation (extension cable): PE-LD (low-density polyethylene) or FEP (fluorinated ethylene propylene) pressure compensation tube: PA
Cable		level probe and Pt100 (optional): - commercially available instrument cable - terminals of the terminal box: 0.08 ... 2.5 mm² temperature head transmitter (optional): - commercially available instrument cable - terminals of the terminal box: 0.08 ... 2.5 mm² - transmitter connection: max. 1.75 mm² probe connection (extension cable): - total outer diameter: 8.0 mm ± 0.25 mm - level probe: 3 x 0.2 mm² and pressure compensation tube with PTFE filter - Pt100 (optional): 7 x 0.2 mm² and pressure compensation tube with PTFE filter - pressure compensation tube with PTFE filter: external diameter Ø2.5 mm, internal diameter Ø1.5 mm
Mass		level probe Ø22 mm: 344 g level probe Ø42 mm: 1376 g level probe Ø29 mm: 394 g probe connection (extension cable) PE: 52 g/m probe connection (extension cable) FEP: 108 g/m suspension clamp: 170 g cable mounting screw G1-1/2: 770 g cable mounting screw N1-1/2: 724 g terminal box: 235 g temperature head transmitter: 40 g additional weight: 300 g testing adapter: 39 g
Mechanical load		probe connection (extension cable): - minimum bending radius: 120 mm - tensile strength: max. 950 N - cable extraction force: &ge 400 N - PE: for use in drinking water - UV-resistant - cable resistance per wire: &le 0.09 &Omega/m
Dimensions		level probe Ø22 mm: Ø22 x 259 mm level probe Ø42 mm: Ø42 x 247 mm level probe Ø29 mm: Ø29 x 268 mm probe connection (extension cable): Ø8 mm suspension clamp: Ø48 x 175 mm cable mounting screw G1-1/2: Ø55 x 71 mm cable mounting screw N1-1/2: Ø38 x 71 mm terminal box: 55 x 80x 120 mm temperature head transmitter: Ø44 x 21 mm additional weight: Ø22 x 110 mm testing adapter: 25 x 25 x 33 mm
Data for application in connection with hazardous areas
EU-Type Examination Certificate		TÜV 01 ATEX 1749
	Marking	II 2G Ex ia IIC T6...T4 Gb
Certificate		PF 16 CERT 1658 X
	Marking	II 3G Ex nA IIC T6...T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
IECEx approval
	IECEx certificate	Ex ia IIC T6...T4 Gb
	Standards	IEC 60079-0:2011 , IEC 60079-11:2009
Certificates and approvals
Drinking water approval		KTW certificate and NSF approval
Accessories
Optional accessories		Pt100 resistance thermometer suspension clamp cable mounting screw G1-1/2 cable mounting screw N1-1/2 terminal box (IP66/IP67) additional weight testing adapter shortening kit for probe connection HUT temperature head transmitter, 2-wire, 4 ... 20 mA

Ультразвуковой датчик Ultrasonic Level Sensor LUC-M** Pepperl+Fuchs

Каталожный номер: T47783

Function and system design
Measuring principle		The sensor of the device transmits ultrasonic pulses in the direction of the product surface. There, the ultrasonic pulses are reflected back and received by the sensor. The device measures the time between pulse transmission and reception. The instrument uses the time (and the velocity of sound) to calculate the distance between the sensor membrane and the product surface. As the device knows the empty distance from a user entry, the device calculate the level.
Equipment architecture		4 ... 20 mA output with HART protocol system integration via PROFIBUS PA
Input characteristics
Measured variable		distance between the sensor membrane and the product surface using the linearization function, the device calculate - level in any units - volume in any units - flow across measuring weirs or open channels in any units
Measurement range		LUC-M10: max. 5 m (16.4 ft) in fluids and 2 m (6.6 ft) in bulk materials LUC-M20: max. 8 m (26.2 ft) in fluids and 3,5 m (11.5 ft) in bulk materials LUC-M30: max. 15 m (49.2 ft) in fluids and 7 m (23 ft) in bulk materials LUC-M40: max. 10 m (32.8 ft) in fluids and 5 m (16.4 ft) in bulk materials
Output characteristics
Output signal		according to the instrument version: - 4 ... 20 mA with HART protocol - PROFIBUS PA
Auxiliary energy
Electrical connection		terminal compartment: In the F12 housing, the terminals are located underneath the housing cover, in the T12 housing, they are under the cover of the separate terminal compartment. cable gland: M20x1.5 (recommended cable diameter 6 ... 10 mm (0.24 ... 0.4 inch)) cable entry G1/2 or NPT1/2 PROFIBUS PA: M12 plug connector
Supply voltage		2-wire HART (standard): - current consumption 4 ... 20 mA - min. terminal voltage 14 V (at 4 mA), 8 V (at 20 mA) - max. terminal voltage 36 V 4-wire HART: - DC version: voltage 10.5 ... 32 V, max. load 600 &Omega - AC version: 90 ... 253 V, max. load 600 &Omega PROFIBUS PA: 9 ... 32 V DC for additional information see technical information
Power consumption		2-wire: 51 ... 800 mW 4-wire AC: max. 4 VA 4-wire DC: 0.6 ... 1 W
Current consumption		2-wire devices: - HART: 3.6 ... 22 mA - PROFIBUS PA: max. 13 mA
Measurement accuracy
Reaction time		depends on the parameter settings: - min. 0.5 s for 4-wire devices - min. 2 s for 2-wire devices
Reference operating conditions		temperature = 20 °C (68 °F) pressure = 1013 mbar_abs humidity = 50 % ideal reflective surface (e. g. calm, smooth fluid surface) no interference reflections within signal beam set application parameters: - tank shape = flat ceiling - medium property = liquid - process conditions = calm surface
Measured value resolution		LUC-M10, LUC-M20: 1 mm (0.04 inch) LUC-M30, LUC-M40: 2 mm (0.08 inch)
Measuring frequency		2-wire devices: max. 0.5 Hz 4-wire devices: max. 2 Hz dependent on the type of device and the parameter settings
Maximum measured error		typical specifications for reference operating conditions (include linearity, repeatability, and hysteresis): ± 2 mm (0.08 inch) or 0.2% of set measuring range (empty calibration)¹⁾ ¹⁾ whichever is greater
Operating conditions
Installation conditions		see technical information (TI)
Ambient conditions
	Ambient temperature	-40 ... 80 °C (-40 ... 176 °F) , For further information see technical information.
	Storage temperature	-40 ... 80 °C (-40 ... 176 °F)
	Resistance to alternating temperature cycles	Nb test: +80 °C/- 40 °C (353 K/233 K), 1 K/min, 100 cycles
	Vibration resistance	20 ... 2000 Hz, 1 (m/s²)²/Hz 3 x 100 min
Process conditions
	Process temperature	-40 ... 80 °C (-40 ... 176 °F) (233 ... 353 K), a temperature sensor is integrated in the sensor for correction of the temperature-dependent time-of-flight
	Process pressure (static pressure)	LUC-M10, LUC-M20: 0.7 ... 3 bar_abs LUC-M30, LUC-M40: 0.7 ... 2.5 bar_abs
Mechanical specifications
Degree of protection		with closed housing, tested according to - IP68, NEMA 6P (24 h at 1.83 m under water surface) - IP66, NEMA 4X with open housing: IP20, NEMA 1 (also ingress protection of the display)
Mechanical construction
Dimensions		see section dimensions
Mass		LUC-M10: approx. 2.5 kg LUC-M20: approx. 2.6 kg LUC-M30: approx. 3.5 kg LUC-M40: approx. 3 kg
Material		material in contact with process: - LUC-M10, LUC-M20: sensor PVDF, seal EPDM - LUC-M30: sensor UP and stainless steel 1.4571/316Ti, seal EPDM, flange PP or stainless steel 1.4571/316Ti - LUC-M40: sensor PVDF, seal Viton or EPDM, flange PP, PVDF or stainless steel 1.4535/316L housing: aluminum, seawater resistant, chromated, powder-coated cover: - aluminum, for version without on-site display - inspection glass for version with on-site display
Certificates and approvals
Explosion-hazardous area		KEMA 05 ATEX 1111, KEMA 05 ATEX 1112 , for additional certificates see www.pepperl-fuchs.com
Type of protection		II 1/2G or II 2G EEx ia IIC T6 (KEMA 05 ATEX 1111) II 1/2G or II 2G EEx d [ia] IIC T6 (KEMA 05 ATEX 1111) II 1/2G or II 2G EEx em [ia] IIC T6 (KEMA 05 ATEX 1111) II 1/2D or II 2D or II 1/3D or II 3D T115°C or T100°C or T95°C (KEMA 05 ATEX 1111) II 1/2D or II 2D or II 1/3D or II 3D T115°C or T83°C or T84°C or T86°C (KEMA 05 ATEX 1112) II 3G EEx nA II T6

Запасные части Pepperl+Fuchs

Каталог запчастей Pepperl+Fuchs

Купить запчасти для Pepperl+Fuchs оптом и в розницу

Техподдержка