The MR-0104 submodule contains an RS-232 interface. The internal connection ensures galvanic separation of the interface from the system and power supply circuits. At the same time, the module contains identification circuits The user has the ability to identify the type of submodule used from the development environment.

CP-2000 is a basic module of the second generation, which is mainly equipped with:     Two CIB Common Installation Bus® masters with full power supply so that up to 64 sensor and actuator modules for this two-wire bus can be connected directly     Additional CIB branches are added by new generation external masters connected via LAN (ethernet).     TCL2 system expansion bus master. It is equipped with a total of 9 I / Os:     four multipurpose inputs, each of which can...

The MR-0130 submodule is used to expand the number of serial channels directly in the basic modules of the Foxtrot 2 system and contains 1x RS-232 interface. The internal connection ensures galvanic separation of the interface from the system and power supply circuits. At the same time, the module contains identification circuits. The user has the ability to identify the type of submodule used from the development environment.

CP-2970

The IB-1301 expansion module is designed for the scanning of up to 12 binary signals 24 V DC with a common pole (minus or plus to way of connection), type 1 according to ČSN EN 61131. The module is equipped with removable screw-type connector. Inputs DI0 to DI3 allow to carry out a special functions conform to inputs on CP-1004 basic module. The inputs are galvanically isolated from the internal circuits (including power supply and communication) and groups of inputs are separated one from...

MT-1691 8x Individual supply of RTD sensors on IT-1601, (IT-1604)

The SC-1101 module is a system communication module enabling the expansion of the central unit by another serial channel supporting UNI and PC modes. A more detailed description of serial communications and their use is given in a separate manual Serial communication of TECOMAT programmable controllers - 32-bit model (order no. TXV 004 03.01). Communication parameters are set in the Mosaic development environment within the project. TECOMAT FOXTROT central units allow the connection of...

GT-1753, 4 axis positioning module for Foxtrot

HDR-15-24; Power supply 85-264VAC / 24VDC, 0.63A in 1M housing

The CP-1000 basic module is one of the basic modules (ZM) of the Foxtrot series modular programmable controller. The basic module CP-1000 is equipped with: - four multi-purpose inputs, each of which can be used either as analog or as binary - two binary inputs at a voltage level of 230V AC - two separate relay outputs. The CP-1000 basic module is equipped with a central unit (CPU) of the K series, which is designed for applications with performance requirements. It contains backed up...

CP-1972 is a first-generation Foxtrot central module in a customer (OEM) design without its own cover. The modules are equipped with a central unit (CPU) of the L series, which is designed for applications with performance requirements. It includes backed up CMOS RAM for user programs, data, tables, user registers and DataBox, Flash memory for user program backup, MMC / SD / SDHC memory card slot and real time circuit.

The MR-0114 submodule contains an RS-485 interface. The internal connection ensures galvanic separation of the interface from the system and power supply circuits. At the same time, the module contains identification circuits The user has the ability to identify the type of submodule used from the development environment.

CP-2005 is a second-generation Foxtrot basic module, which is an optimal combination of a central unit with an integrated combination of 12 digital and analog inputs and outputs, compact size occupying a width of 6 modules on a DIN rail. It is thus possible to have a variant with a built-in LTE modem for direct connection to the Internet via a mobile operator. Of course, there are masters of both system expansion buses - TCL2 (up to 10 addressable modules) and two-wire CIB Common...

Submodule MR-0131 contains 1x RS-485 interface. The internal connection ensures galvanic separation of the interface from the system and power supply circuits. At the same time, the module contains identification circuits The user has the ability to identify the type of submodule used from the development environment.

The IB-1301 expansion module is designed for the scanning of up to 12 binary signals 24 V DC with a common pole (minus or plus to way of connection), type 1 according to ČSN EN 61131. The module is equipped with removable screw-type connector. Inputs DI0 to DI3 allow to carry out a special functions conform to inputs on CP-1004 basic module. The inputs are galvanically isolated from the internal circuits (including power supply and communication) and groups of inputs are separated one from...

SUPPRESSOR SET 8x RC Clamp 115-230V AC

SC-1102; 1x CAN interface The SC-1102 module is a system communication module enabling the expansion of the central unit by another serial channel supporting the CSJ mode. A more detailed description of serial communications and their use is given in a separate manual Serial communication of TECOMAT programmable controllers - 32-bit model (order no. TXV 004 03.01). Communication parameters are set in the Mosaic development environment within the project. TECOMAT FOXTROT central units...

HDR-30-24; Power supply 85-264VAC / 24VDC, 1.5A in 2M housing

The basic module CP-1003 is equipped with eight multi-purpose inputs, each of which can be used either as     analog (voltage, current or for passive temperature sensors) or as     binary 24V, eight fast binary inputs with adjustable decision level     four analog outputs ± 10 V,     eight relay outputs and     four fast transistor outputs with the possibility of direct connection of DC or stepper motors. The CP-1003 basic module is equipped with a central unit (CPU)...

The MR-0124 submodule contains 1x RS-422 interface. The internal connection ensures galvanic separation of the interface from the system and power supply circuits. At the same time, the module contains identification circuits The user has the ability to identify the type of submodule used from the development environment.

CP-2007 is a second-generation Foxtrot basic module, with a central unit and an integrated extended combination of a total of 27 digital and analog inputs and outputs in a larger size occupying a width of 9 modules on a DIN rail. It is thus possible to have a variant with a built-in LTE modem for direct connection to the Internet via a mobile operator. Of course, there are masters of both system expansion buses - TCL2 (up to 10 addressable modules) and two-wire CIB Common Installation Bus®...

The MR-0133 submodule contains 2x RS-485 interfaces. The internal connection ensures galvanic separation of the interface from the system and power supply circuits. In the variant with the number TXN 101 33.01, both buses have already connected a 120 Ω terminating resistor. At the same time, the module contains identification circuits. The user has the opportunity to identify the type of submodule used from the development environment.

The IR-1501 expansion module is designed for reading up to 4 binary 24 V DC signals with a common terminal (according to the minus or plus connection), type 1 according to ČSN EN 61131. The module contains 8 relay outputs with a switching contact and a common terminal. The module is equipped with removable screw connectors. Inputs DI0 ÷ DI3 allow to implement special functions identical to inputs DI0-DI3 of basic module CP-1004. The relay outputs can switch max. 230 V AC, 3 A (current...

SUPPRESSOR SET 8x RC Clamp 24-48V DC/AC

SC-1112-T; RF interface for Wireless M-BUS, mode T RFox2 master on DIN rail (1M) The SC-1112.T module is a system communication module enabling the extension of the central unit by receiving and transmitting RF packets via the Wireless M-Bus protocol in "T" and "S" modes (EN 13757-4). The operation of this module is realized by the WMBusLib library in the Mosaic development environment. TECOMAT FOXTROT central units allow the connection of up to 6 SC-11xx system communication modules, which...

HDR-60-24; Power supply 85-264VAC / 24VDC, 2.5A 3M housing

CP-1004, CPU, ETH100/10, 1xRS232, 1xSCH, 4xDI/AI, 4xDI/HSC, 6xRO 230 V/ 3A,1xCIB

The MR-0152 submodule contains PROFIBUS DP Slave controllers and an RS-485 interface, including galvanic isolation from the system and galvanic isolation power supply circuits. At the same time, the submodule contains identification circuits (the user has the possibility to identify the type of submodule used from the development environment).

The CP-2080 is a second-generation Foxtrot basic module, with a central unit and an integrated combination of a total of 12 digital inputs and outputs in a compact size occupying a width of 6 modules on a DIN rail. It is thus possible to have a variant with a built-in LTE modem for direct connection to the Internet via a mobile operator. Of course, there are masters of both system expansion buses - TCL2 (up to 10 addressable modules) and two-wire CIB Common Installation Bus® (up to 32...

MR-0134 is a submodule, which is used to expand the number of serial channels directly in the basic modules of the Foxtrot 2 system, it contains 2x RS-232. The internal connection ensures galvanic separation of the interface from the system and power supply circuits. At the same time, the module contains identification circuits. The user has the ability to identify the type of submodule used from the development environment.