CP-7000 is a central processing unit with support for higher programming languages IEC 61131-3. It is designed for medium higher performance applications. Contains: 256 KB backed up CMOS RAM for user program, data and tables, 64 KB user registers, 512 KB DataBox - CMOS RAM for data archiving. Flash EEPROM for user program backup Furthermore, real-time circuit, two serial channels, USB interface.

MR-0154, External I/O bus TCL2 for CP-7001,7002,7003

IB-7302 32 inputs 24 V  DC / 5 ms

Connector, screw type, parallel direction, 20 pins, pitch 5,08

GT-7751-4 are positioning modules of the Tecomat TC700 system for position control of machines by means of a servo drive (Motion Control). The modules are designed for simultaneous control of 1 to 6 axes in various modes of interconnection of motion. Each axis contains a control loop with a PID controller, where the input information about the actual position is read from an incremental encoder (IRC) or from a position encoder with a serial communication interface (SSI). The output of the...

SC-7103, 2 serial channels, optional interfaces

PW-7901 power supply 24 V DC without UPS

RM-7941 rack, 8 positions

KB-0201 TC700 bus termination module (set of 2 pcs)

CP-7004, CPU, Ethernet 10/100Mbit RJ-45, 192kB+64kB, 0.5 DataBox, expandable +3MB, 2x SCH, USB, MMC/SD slot

MR-0155, Sub-module with FSK modem

IB-7303 is an expansion module of the Tecomat TC700 system designed with Type 1 inputs for sensing up to 16 binary signals 24 V DC / AC (4mA, 0.5 ms, with the possibility of interruption) with a common terminal (according to the minus, plus or AC power supply). The module is equipped with a connector, for which the customer can choose from several variants of the counterpart, which are ordered separately. (order numbers TXN 102 3x). Straight, vertical, screw and screwless connectors are...

Connector, screw type, right angle, 20 pins, pitch 5,08

SC-7104, 1 x ETHERNET 100Mbit/RJ-45, 2 serial channels, optional interfaces

PW-7902 power supply 24 V DC  with UPS

RM-7942 rack, 15 positions

KB-0202, bus cable with power supply, 0.5m

CP-7007, CPU, 320kB+192kB, DataBox 0.5MB, expandable +3MB, 2x SCH, 1xUSB, 1xEthernet 10/100Mbit, MMC/SD slot

MR-0156, Sub-module with FSK modem and continuous amplifier

The IB-7305 is an expansion module of the Tecomat TC700 system designed with inputs for reading up to 16 binary 230 V AC signals. The module is equipped with a connector, for which the customer can choose from several variants of the counterpart, which are ordered separately. (order numbers TXN 102 3x). Straight, vertical, screw and screwless connectors are described in the TXV 102 30 documentation or the TXV 001 08.01 design manual.

Connector, screwless type, 20 pins, pitch 5,08

PW-7903 power supply 230 V AC, without UPS

RM-7944 rack, 2 position

KB-0203, bus connection cable without power supply, 0.5m

SX-7153 Databox 3 MB, additional data memory

The IB-7310 module is designed for reading up to 64 binary 24 V DC signals with a common minus terminal, Type 3. The module is equipped with four connectors, each with 16 inputs, to which voltage is supplied from an external 24 V DC supply voltage source. . These inputs are designed primarily for connecting external modules of the IB-04xx series. External modules IB-04xx are structurally adapted for installation on a DIN rail. For the IB-7310 module, they unify binary signals from...

Set of 2 connectors, screwless type, 2x20 pins, pitch 3,5

PW-7904 power supply 230 V AC, with UPS

RM-7946 rack, 4 position

KB-0204, bus connection module with customer cable