AP Bose, communication driver for BOSE SoundTouch speakers

The RexLib library contains a set of function blocks intended for system control. This library can be used for Foxtrot control systems and Tecomat TC-700 systems with CP-7000, CP-7004 processor unit. The RexLib library contains the following function blocks:     • fbPIDU - basic PID controller     • fbPIDMA - PID controller with autotuner     • fbPSMPC - pulse-step predictive controller     • fbMCU - block for manual entry of values     • fbPWM - pulse width modulation block     •...

Project Batch Manager - Batch window The Batch window is used for the following activities:      mass testing of system libraries      mass testing of user libraries      mass translation and sending of programs to target machines (or their testing)

AP Satel, communication protocol for Satel security system

The Building.lib library is a library for the Mosaic programming environment. Its content is designed to support the programming of so-called building management applications.

Data exchange between PLCs - PLCnet PLCnet is a subsystem of TECOMAT programmable logic controllers used for data exchange between PLCs. The exchange takes place via Ethernet, is decentralized and transparent. Decentralized because communications take place directly between machines without the involvement of any intermediary. Decentralization achieves maximum reliability and resilience of the entire subsystem - failure or shutdown of one or more automata does not disrupt the exchange of...

Function libraries and function blocks are an integral part of the Mosaic programming environment installation. In terms of their construction, libraries can be divided into the following types: built-in libraries standard external libraries user-defined libraries The library can contain declarations of functions, function blocks, data types, and global variables. The SysLib library is one of the standard libraries.

SFC (Sequential function chart) is a programming form according to the IEC 61131-3 standard designed to solve state problems.

Actuators controlled by two binary inputs are often used in heat control, air conditioning and elsewhere. E.g. "Forward" and "Backward". If the actuator has the possibility of feedback, for example by a resistance position transmitter, it can be controlled by a PID controller with a three-state output. In simpler applications without feedback, it is necessary to control the actuator with only two outputs so that the switching time determines the required distance traveled. FB ServoControl...

Der Dienst TecoRoute dient der Fernverwaltung der Tecomat-SPS über das Internet. Der Service wird von Teco für die Systeme Tecomat Foxtrot und Tecomat TC700 bereitgestellt. Das SPS-System muss mit dem Internet verbunden sein, eine öffentliche IP-Adresse und keine zusätzliche Hardware (außer dem Router) werden benötigt. Dadurch ist die SPS sowohl für Programmierer als auch für Endbenutzer der SPS leicht zugänglich.

The ComLib library is supplied as standard as part of the Mosaic programming environment. The library contains functions and function blocks enabling receiving and sending messages via the PLC communication channel. This can be either a serial line or Ethernet.

On-line program change is a feature of the Tecomat PLC central unit, which allows modifications of the user program without stopping the technology control, ie without the need to shut down the controlled technology when modifying the PLC program. This feature gives the Tecomat programmer the ability to make modifications and changes to the PLC program so-called "on the fly".

The ModbusRTUlib library contains declarations of functions, function blocks, data types and global variables for Modbus master communication. The ModbusRTUlib library uses some functions from the ComLib and CrcLib libraries. The library is delivered as a part of the installation of the Mosaic environment from version v 2.0.25.0. ModbusRTUlib library functions and function blocks are supported in K-series central units (TC700 CP-7004 and all Foxtrot system variants) from version v 5.7. and...

Working with a memory card in Tecomat Foxtrot and TC700 systems with a CP-7004 processor unit. The primary task of the card in these systems is to store web pages for the integrated web server. These cards can also be used for other purposes, such as storing data from a PLC program. However, certain conditions need to be met.

The ToStringLib library is supplied as standard as part of the Mosaic programming environment. The library contains conversion functions for converting variables to a string with the option to specify the output format.

The GraphicPanelLib library contains functions for drawing on monochrome graphic panel displays. The GraphicPanelLib library contains functions for drawing simple objects such as a line, rectangle, etc., as well as functions for working with text (text output, font change,…). All drawing functions from this library are drawn into a structure called a frame buffer in this manual. GraphicPanelLib library is only supported on Foxtrot 2 systems from version v3.1

The InternetLib library contains a set of functions for working with services available on the Internet. The library can be used with K and L series central unit systems with firmware version 4.9 and higher. The included function blocks implement the translation of domain names into IP addresses, time synchronization with time servers, sending emails via the SMTP protocol and basic HTTP protocol queries.

The FlashLib library is supplied as standard as part of the Mosaic programming environment. The library contains functions and function blocks enabling work with flash memory, which is a standard part of K-series processor units. Flash memory is a non-volatile (semi-permanent) electrically programmable (writable) memory with arbitrary access.

The DebugComLib library contains function blocks for recording communication taking place on channels and connections in UNI mode to the Databox.

The WebGraphLib library contains functions and function blocks that support the display of simple graphs in a web page created with WebMaker.

The iControlLib library contains function blocks usable mainly in smart homes. These blocks are ready for control from the web interface and for easy integration with applications (iFoxtrot, HomeKit, ...). The iControlLib library is supplied as standard as part of the Mosaic programming environment. Mosaic version v2017.1 is required for iControlLib_v20 and higher, iFoxtrot must be version v2.4.1 or higher.

Die DMX512lib-Bibliothek enthält einen Funktionsblock und eine fbDMX512 FB-Datenstruktur, die Kommunikationskanaleinstellungen und Kommunikation durchführt. Der Funktionsbaustein verwendet andere Funktionsbausteine ​​aus der ComLib-Bibliothek. DMX512 ist ein serielles Protokoll zur Steuerung von Lichttechnik wie Dimmern und anderen Spezialeffekten über eine digitale Schnittstelle. Das Protokoll wird seit 1998 von der Entertainment Services and Technology Association (ESTA) gepflegt. Die...

The XmlLib library contains function blocks that allow you to work with data in the Extensible Markup Language (XML) format. Processes data with a general ZML structure: Text XmlLib version 1.3 has the following limitations: - Comments are ignored - The maximum length of a tag, attribute, or tag or attribute content is 80 characters - The maximum number of attributes for one tag is ten - CDATA section is not supported - Wildcard xml entities are not supported

The Iec104sLib library is used for communication of Tecomat systems with the central unit of the K and L series (all Foxtrot systems, TC700 systems with CP-7004 or CP-7007) with superior systems according to the IEC 870-5-104 standard. In this case, the Tecomat system is a slave of the remote control (it works as a server). The library contains the function block fbIEC_60870_5_104_s, which implements everything needed for communication. Communication takes place via TCP / IP protocol with...

The AstroLib library contains functions that allow you to calculate basic data about the position of the Sun at a specified time and a specified coordinate anywhere on Earth. It also provides the time of dawn and dusk on this coordinate - civil, nautical and astronomical ..

The EnergyLib library contains functional blocks enabling reading of data from an electricity meter connected via an opto head or via the RS-485 interface (communication according to the ČSN EN 62056-21 standard) and calculating electricity consumption based on S0 pulses provided by the electricity meter. Furthermore, the library provides the function of the SW calorimeter, ie the calculation of the flow and supplied heat based on the data from the flow meter and the measured inlet and outlet...

The DaliLibEx library contains function blocks for communication of the Foxtrot system (from version v. 5.7. And higher) with DALI ballasts via CIB to DALI bus converter modules. Typically C-DL-0012S and C-DL-0064M. The DALI bus uses a special two-wire serial synchronous protocol according to NEMA Standards Publication 243-2004 Digital Addressable Lighting Interface (DALI) Control Devices Protocol PART 1-2004 and PART 2-2004.

Polohovací moduly slouží pro řízení polohy strojních zařízení pomocí servopohonů (Motion Control) v programovatelných automatech (dále jen PLC) TECOMAT TC700 a Foxtrot. Popis modulů v dokumentaci TXV 004 25. Jednotlivé osy polohovacího modulu mohou pracovat jako zcela nezávislé nebo s různými typy vzájemných závislostí pohybů os. V maximální výstavbě až 3 libovolné osy mohou pracovat ve společné lineární interpolaci a zbývající 3 osy mohou být opět navzájem v lineární interpolaci nebo v jiné...

The DscLib library is intended for communication of Tecomat PLC systems with DSC PowerSeries security control panels (via DSC IT-100 Data Interface Module).

The LG_HVAC_Lib library is intended for communication of Tecomat PLC systems with LG air conditioning systems. The RS-485 interface is used for communication, which is available on the communication modules built into the indoor or outdoor air conditioning unit, depending on on the LG air conditioning model used (see below). LG Air Conditioner must support the LGAP communication protocol. From the Foxtrot PLC side, the serial channel CH2, CH3 or CH4 is used for communication, which...