Запчасти и компоненты для торгового оборудования. Более 8 500 клиентов и более 1 000 000 товаров! Скрыть
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | NPN | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Reduction factor rAl | 0.45 | |
| Reduction factor rCu | 0.35 | |
| Reduction factor r304 | 0.75 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 1500 Hz | |
| Hysteresis | typ. 5% | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | &le 3 V | |
| Operating current | 0 ... 100 mA | |
| Off-state current | 0 ... 0.5 mA typ. 0.1 µA | |
| No-load supply current | &le 15 mA | |
| Switching state indicator | Multihole-LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2740 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 4-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | LCP | |
| Housing diameter | 8 mm | |
| Degree of protection | IP67 | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M20 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 47 g | |
| Dimensions | ||
| Width across corners (D2) | 26.5 mm | |
| Diameter thru-hole (DT) | 20 ... 20.2 mm | |
| Flexible conduit, max. outer diameter (FC1) | 22.2 mm | |
| Flexible conduit, inner diameter (FC2) | 0.5 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 36.5 mm | |
| Width across flats (SW1) | 22 mm | |
| Width across flats (SW2) | 24 mm | |
| Width across flats (SW3) | 24 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 52.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5.5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking |  II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 15 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 10 ... 18 mm | |
| Seal combination S1 | 14.5 ... 18 mm | |
| Seal combination S1+S2 | 12 ... 14.5 mm | |
| Seal combination S1+S2+S3 | 10 ... 12 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M25 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 105 g | |
| Dimensions | ||
| Width across corners (D2) | 31.5 mm | |
| Diameter thru-hole (DT) | 25 ... 25.2 mm | |
| Flexible conduit, max. outer diameter (FC1) | 27.5 mm | |
| Flexible conduit, inner diameter (FC2) | 0.75 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 40 mm | |
| Width across flats (SW1) | 28 mm | |
| Width across flats (SW2) | 29 mm | |
| Width across flats (SW3) | 29 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 56 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 22 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 25 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | PNP | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Reduction factor rAl | 0.45 | |
| Reduction factor rCu | 0.4 | |
| Reduction factor r304 | 0.75 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 1500 Hz | |
| Hysteresis | typ. 5 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | &le 3 V | |
| Operating current | 0 ... 100 mA | |
| Off-state current | 0 ... 0.5 mA typ. 0.1 µA | |
| No-load supply current | &le 15 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2790 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Standard conformity | ||
| Standards | IEC / EN 60947-5-2:2004 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Core cross-section | 0.14 mm2 | |
| Housing material | brass, nickel-plated | |
| Sensing face | LCP | |
| Housing diameter | 8 mm | |
| Degree of protection | IP67 | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 10 ... 18 mm | |
| Seal combination S1 | 14.5 ... 18 mm | |
| Seal combination S1+S2 | 12 ... 14.5 mm | |
| Seal combination S1+S2+S3 | 10 ... 12 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M25 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 105 g | |
| Dimensions | ||
| Width across corners (D2) | 31.5 mm | |
| Diameter thru-hole (DT) | 25 ... 25.2 mm | |
| Flexible conduit, max. outer diameter (FC1) | 27.5 mm | |
| Flexible conduit, inner diameter (FC2) | 0.75 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 40 mm | |
| Width across flats (SW1) | 28 mm | |
| Width across flats (SW2) | 29 mm | |
| Width across flats (SW3) | 29 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 56 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 22 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 25 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 10 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 14 ... 24 mm | |
| Seal combination S1 | 20 ... 24 mm | |
| Seal combination S1+S2 | 17 ... 20 mm | |
| Seal combination S1+S2+S3 | 14 ... 17 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M32 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 126 g | |
| Dimensions | ||
| Width across corners (D2) | 39.8 mm | |
| Diameter thru-hole (DT) | 32 ... 32.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 34.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 45 mm | |
| Width across flats (SW1) | 35 mm | |
| Width across flats (SW2) | 36 mm | |
| Width across flats (SW3) | 36 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 61 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 20 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 23 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 28 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | PNP | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Reduction factor rAl | 0.45 | |
| Reduction factor rCu | 0.4 | |
| Reduction factor r304 | 0.75 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 3000 Hz | |
| Hysteresis | typ. 5% | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | &le 3 V | |
| Operating current | 0 ... 100 mA | |
| Off-state current | 0 ... 0.5 mA typ. 0.1 µA at 25 °C | |
| No-load supply current | &le 15 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2790 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | Cable connector M8 x 1 , 3-pin with PVC cable 300 mm | |
| Core cross-section | 0.14 mm2 | |
| Housing material | brass, nickel-plated | |
| Sensing face | LCP | |
| Housing diameter | 8 mm | |
| Degree of protection | IP67 | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 14 ... 24 mm | |
| Seal combination S1 | 20 ... 24 mm | |
| Seal combination S1+S2 | 17 ... 20 mm | |
| Seal combination S1+S2+S3 | 14 ... 17 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M32 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 126 g | |
| Dimensions | ||
| Width across corners (D2) | 39.8 mm | |
| Diameter thru-hole (DT) | 32 ... 32.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 34.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 45 mm | |
| Width across flats (SW1) | 35 mm | |
| Width across flats (SW2) | 36 mm | |
| Width across flats (SW3) | 36 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 61 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 20 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 23 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 28 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 10 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M40 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 141 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 40 ... 40.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 43 mm | |
| Flexible conduit, inner diameter (FC2) | 1.25 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 52 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Width across flats (SW3) | 45 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 70 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | PNP | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Reduction factor rAl | 0.45 | |
| Reduction factor rCu | 0.35 | |
| Reduction factor r304 | 0.75 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 2000 Hz | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | &le 3 V | |
| Operating current | 0 ... 100 mA | |
| Off-state current | 0 ... 0.5 mA typ. 0.1 µA | |
| No-load supply current | &le 15 mA | |
| Switching state indicator | Multihole-LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2640 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 80 °C (-13 ... 176 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M8 x 1 , 3-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | LCP | |
| Housing diameter | 8 mm | |
| Degree of protection | IP67 | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M40 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 141 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 40 ... 40.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 43 mm | |
| Flexible conduit, inner diameter (FC2) | 1.25 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 52 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Width across flats (SW3) | 45 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 70 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 352 g | |
| Dimensions | ||
| Width across corners (D2) | 59 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 49.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1.5 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 58 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 52 mm | |
| Width across flats (SW3) | 52 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 76 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 352 g | |
| Dimensions | ||
| Width across corners (D2) | 59 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 49.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1.5 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 58 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 52 mm | |
| Width across flats (SW3) | 52 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 76 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 2 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | NPN | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Reduction factor rAl | 0.45 | |
| Reduction factor rCu | 0.35 | |
| Reduction factor r304 | 0.75 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 1500 Hz | |
| Hysteresis | typ. 5% | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | &le 3 V | |
| Operating current | 0 ... 100 mA | |
| Off-state current | 0 ... 0.5 mA typ. 0.1 µA | |
| No-load supply current | &le 15 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2740 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | cable PVC , 2 m | |
| Core cross-section | 0.14 mm2 | |
| Housing material | brass, nickel-plated | |
| Sensing face | LCP | |
| Housing diameter | 8 mm | |
| Degree of protection | IP67 | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 35 ... 45 mm | |
| Seal combination S1 | 41 ... 45 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 468 g | |
| Dimensions | ||
| Width across corners (D2) | 72 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 62.5 mm | |
| Flexible conduit, inner diameter (FC2) | 2 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 56.5 mm | |
| Width across flats (SW1) | 68 mm | |
| Width across flats (SW2) | 65 mm | |
| Width across flats (SW3) | 65 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 74.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 35 ... 45 mm | |
| Seal combination S1 | 41 ... 45 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 468 g | |
| Dimensions | ||
| Width across corners (D2) | 72 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 62.5 mm | |
| Flexible conduit, inner diameter (FC2) | 2 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 56.5 mm | |
| Width across flats (SW1) | 68 mm | |
| Width across flats (SW2) | 65 mm | |
| Width across flats (SW3) | 65 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 74.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 2 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | PNP | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Reduction factor rAl | 0.45 | |
| Reduction factor rCu | 0.35 | |
| Reduction factor r304 | 0.75 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 1500 Hz | |
| Hysteresis | typ. 5 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | &le 3 V | |
| Operating current | 0 ... 100 mA | |
| Off-state current | 0 ... 0.5 mA typ. 0.1 µA | |
| No-load supply current | &le 15 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2730 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | cable PVC , 5 m | |
| Core cross-section | 0.14 mm2 | |
| Housing material | brass, nickel-plated | |
| Sensing face | LCP | |
| Housing diameter | 8 mm | |
| Degree of protection | IP67 | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 46 ... 59 mm | |
| Seal combination S1 | 57 ... 59 mm | |
| Seal combination S1+S2 | 51 ... 57 mm | |
| Seal combination S1+S2+S3 | 46 ... 51 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M75 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 885 g | |
| Dimensions | ||
| Width across corners (D2) | 89 mm | |
| Diameter thru-hole (DT) | 75 ... 75.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 75 mm | |
| Flexible conduit, inner diameter (FC2) | 2.5 inch | |
| Flexible conduit, corrugation size (FC3) | 6.5 mm | |
| Length outside enclosure (H) | 65.5 mm | |
| Width across flats (SW1) | 80 mm | |
| Width across flats (SW2) | 80 mm | |
| Width across flats (SW3) | 80 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 85.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 30 Nm | |
| Nut torque 2 with seal S1 (SW2) | 150 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 175 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 185 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 46 ... 59 mm | |
| Seal combination S1 | 57 ... 59 mm | |
| Seal combination S1+S2 | 51 ... 57 mm | |
| Seal combination S1+S2+S3 | 46 ... 51 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M75 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 885 g | |
| Dimensions | ||
| Width across corners (D2) | 89 mm | |
| Diameter thru-hole (DT) | 75 ... 75.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 75 mm | |
| Flexible conduit, inner diameter (FC2) | 2.5 inch | |
| Flexible conduit, corrugation size (FC3) | 6.5 mm | |
| Length outside enclosure (H) | 65.5 mm | |
| Width across flats (SW1) | 80 mm | |
| Width across flats (SW2) | 80 mm | |
| Width across flats (SW3) | 80 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 85.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 30 Nm | |
| Nut torque 2 with seal S1 (SW2) | 150 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 175 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 185 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 2 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | NPN | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm | |
| Reduction factor rAl | 0.38 | |
| Reduction factor rCu | 0.2 | |
| Reduction factor r304 | 0.8 | |
| Reduction factor rBrass | 0.45 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 600 Hz | |
| Hysteresis | 0.06 ... 0.44 mm | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Overload resistance | yes | |
| Wire breakage protection | yes | |
| Inductive overvoltage protection | yes | |
| Surge suppression | yes | |
| Ripple | 10 % | |
| Voltage drop | &le 2.5 V | |
| Repeat accuracy | 0.1 mm | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0.01 mA | |
| No-load supply current | &le 1 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2560 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable PUR , 2 m | |
| Core cross-section | 0.25 mm2 | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | PBT | |
| Housing diameter | 8 mm | |
| Degree of protection | IP67 | |
| Mass | 58 g | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 362 g | |
| Dimensions | ||
| Width across corners (D2) | 59 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Flexible conduit, max. outer diameter (FC1) | 49.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1.5 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 78 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 52 mm | |
| Width across flats (SW3) | 52 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 78 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 10 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NPN | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm | |
| Reduction factor rAl | 0.38 | |
| Reduction factor rCu | 0.2 | |
| Reduction factor r304 | 0.8 | |
| Reduction factor rBrass | 0.45 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 600 Hz | |
| Hysteresis | 0.06 ... 0.44 mm | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Overload resistance | yes | |
| Wire breakage protection | yes | |
| Inductive overvoltage protection | yes | |
| Surge suppression | yes | |
| Ripple | 10 % | |
| Voltage drop | &le 2.5 V | |
| Repeat accuracy | 0.1 mm | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0.01 mA | |
| No-load supply current | &le 1 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2560 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable PUR , 2 m | |
| Core cross-section | 0.25 mm2 | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | PBT | |
| Housing diameter | 8 mm | |
| Degree of protection | IP67 | |
| Mass | 58 g | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 362 g | |
| Dimensions | ||
| Width across corners (D2) | 59 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Flexible conduit, max. outer diameter (FC1) | 49.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1.5 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 78 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 52 mm | |
| Width across flats (SW3) | 52 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 78 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 10 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 2 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | PNP | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.35 | |
| Reduction factor r304 | 0.8 | |
| Reduction factor rBrass | 0.45 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 3500 Hz | |
| Hysteresis | 0.02 ... 0.4 mm | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Overload resistance | yes | |
| Wire breakage protection | yes | |
| Inductive overvoltage protection | yes | |
| Surge suppression | yes | |
| Ripple | 10 % | |
| Voltage drop | &le 2.5 V | |
| Repeat accuracy | 0.1 mm | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0.01 mA | |
| No-load supply current | &le 7 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2280 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable PUR , 2 m | |
| Core cross-section | 0.25 mm2 | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | PBT | |
| Housing diameter | 8 mm | |
| Degree of protection | IP67 | |
| Mass | 58 g | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 142 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Flexible conduit, max. outer diameter (FC1) | 43 mm | |
| Flexible conduit, inner diameter (FC2) | 1.25 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 72 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Width across flats (SW3) | 45 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 72 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 9 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | PNP | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.7 | |
| Reduction factor rBrass | 0.45 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 2000 Hz | |
| Hysteresis | 0.02 ... 0.4 mm | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Overload resistance | yes | |
| Inductive overvoltage protection | yes | |
| Surge suppression | yes | |
| Ripple | 10 % | |
| Voltage drop | &le 2.5 V | |
| Repeat accuracy | 0.1 mm | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0.01 mA | |
| No-load supply current | &le 7 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2560 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 4-pin | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | PBT | |
| Housing diameter | 8 mm | |
| Degree of protection | IP67 | |
| Mass | 7 g | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 142 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Flexible conduit, max. outer diameter (FC1) | 43 mm | |
| Flexible conduit, inner diameter (FC2) | 1.25 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 72 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Width across flats (SW3) | 45 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 72 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 9 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | PNP | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.35 | |
| Reduction factor r304 | 0.7 | |
| Reduction factor rBrass | 0.45 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 2500 Hz | |
| Hysteresis | 0.06 ... 0.44 mm | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Overload resistance | yes | |
| Wire breakage protection | yes | |
| Inductive overvoltage protection | yes | |
| Surge suppression | yes | |
| Ripple | 10 % | |
| Voltage drop | &le 2.5 V | |
| Repeat accuracy | 0.1 mm | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0.01 mA | |
| No-load supply current | &le 5 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 3250 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable PUR , 2 m | |
| Core cross-section | 0.25 mm2 | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | PBT | |
| Housing diameter | 8 mm | |
| Degree of protection | IP67 | |
| Mass | 58 g | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 14 ... 24 mm | |
| Seal combination S1 | 20 ... 24 mm | |
| Seal combination S1+S2 | 17 ... 20 mm | |
| Seal combination S1+S2+S3 | 14 ... 17 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 127 g | |
| Dimensions | ||
| Width across corners (D2) | 39.8 mm | |
| Diameter thru-hole (DT) | 33.5 ... 33.7 mm | |
| Flexible conduit, max. outer diameter (FC1) | 34.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 65 mm | |
| Width across flats (SW1) | 35 mm | |
| Width across flats (SW2) | 36 mm | |
| Width across flats (SW3) | 36 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 65 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 8 Nm | |
| Nut torque 2 with seal S1 (SW2) | 20 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 23 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 28 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NPN | |
| Rated operating distance | 2 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.62 mm | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 8 mm x 8 mm x 1 mm | |
| Reduction factor rAl | 0.38 | |
| Reduction factor rCu | 0.2 | |
| Reduction factor r304 | 0.8 | |
| Reduction factor rBrass | 0.45 | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V | |
| Switching frequency | 0 ... 600 Hz | |
| Hysteresis | 0.06 ... 0.44 mm | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Overload resistance | yes | |
| Wire breakage protection | yes | |
| Inductive overvoltage protection | yes | |
| Surge suppression | yes | |
| Ripple | 10 % | |
| Voltage drop | &le 2.5 V | |
| Repeat accuracy | 0.1 mm | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0.01 mA | |
| No-load supply current | &le 1 mA | |
| Switching state indicator | Multihole-LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 2480 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated &le36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | connector (M8 x 1), 3-pin | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | PBT | |
| Housing diameter | 8 mm | |
| Degree of protection | IP67 | |
| Mass | 7 g | |
Компания Zipstore.ru поставляет оптом и в розницу запчасти Pepperl+Fuchs.
В каталоге сайта представлено 13440 запчастей Pepperl+Fuchs. Также вы можете приобрести опции и аксессуары для расширения функциональных возможностей, транспортировки и эксплуатации оборудования. Запчасти в каталоге могут иметь полное название, каталожный номер, фотографию, краткое описание, а также модели принтеров, с которыми они совместимы.
Для оформления заказа вы можете воспользоваться одним из следующих способов:
Мы осуществляем поставки запчастей Pepperl+Fuchs во все города России, а также в Республику Беларусь, Казахстан и другие страны СНГ.
Продажа осуществляется за наличный и безналичный расчет. На сайте указаны розничные цены в рублях и долларах, с учетом НДС. Чтобы узнать оптовые цены на запчасти Pepperl+Fuchs, нужно отправить запрос по электронной почте. Подробнее о способах доставки и оплаты можно узнать в разделе сайта «Оплата и доставка». В разделе «%Скидки и акции» Вы можете найти наиболее выгодные предложения по продаже запчастей, а также сезонные скидки и акции.
При возникновении вопросов по обслуживанию, эксплуатации, ремонту Pepperl+Fuchs, Вы можете проконсультироваться со специалистами на форуме сайта.
