Атол 30Ф не включается (заводской брак)
Валерий
14 января 2022
Запчасти и компоненты для торгового оборудования. Более 8 000 клиентов и более 1 000 000 товаров! Скрыть
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M16 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 46 g | |
| Dimensions | ||
| Width across corners (D2) | 26.5 mm | |
| Diameter thru-hole (DT) | 16 ... 16.2 mm | |
| Flexible conduit, max. outer diameter (FC1) | 22.2 mm | |
| Flexible conduit, inner diameter (FC2) | 0.5 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 40 mm | |
| Width across flats (SW1) | 22 mm | |
| Width across flats (SW2) | 24 mm | |
| Width across flats (SW3) | 24 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 50.9 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 4 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking |  II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M16 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 46 g | |
| Dimensions | ||
| Width across corners (D2) | 26.5 mm | |
| Diameter thru-hole (DT) | 16 ... 16.2 mm | |
| Flexible conduit, max. outer diameter (FC1) | 22.2 mm | |
| Flexible conduit, inner diameter (FC2) | 0.5 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 40 mm | |
| Width across flats (SW1) | 22 mm | |
| Width across flats (SW2) | 24 mm | |
| Width across flats (SW3) | 24 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 50.9 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 4 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 15 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M20 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 47 g | |
| Dimensions | ||
| Width across corners (D2) | 26.5 mm | |
| Diameter thru-hole (DT) | 20 ... 20.2 mm | |
| Flexible conduit, max. outer diameter (FC1) | 22.2 mm | |
| Flexible conduit, inner diameter (FC2) | 0.5 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 36.5 mm | |
| Width across flats (SW1) | 22 mm | |
| Width across flats (SW2) | 24 mm | |
| Width across flats (SW3) | 24 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 52.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5.5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M20 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 47 g | |
| Dimensions | ||
| Width across corners (D2) | 26.5 mm | |
| Diameter thru-hole (DT) | 20 ... 20.2 mm | |
| Flexible conduit, max. outer diameter (FC1) | 22.2 mm | |
| Flexible conduit, inner diameter (FC2) | 0.5 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 36.5 mm | |
| Width across flats (SW1) | 22 mm | |
| Width across flats (SW2) | 24 mm | |
| Width across flats (SW3) | 24 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 52.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5.5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 15 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 10 ... 18 mm | |
| Seal combination S1 | 14.5 ... 18 mm | |
| Seal combination S1+S2 | 12 ... 14.5 mm | |
| Seal combination S1+S2+S3 | 10 ... 12 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M25 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 105 g | |
| Dimensions | ||
| Width across corners (D2) | 31.5 mm | |
| Diameter thru-hole (DT) | 25 ... 25.2 mm | |
| Flexible conduit, max. outer diameter (FC1) | 27.5 mm | |
| Flexible conduit, inner diameter (FC2) | 0.75 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 40 mm | |
| Width across flats (SW1) | 28 mm | |
| Width across flats (SW2) | 29 mm | |
| Width across flats (SW3) | 29 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 56 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 22 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 25 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 10 ... 18 mm | |
| Seal combination S1 | 14.5 ... 18 mm | |
| Seal combination S1+S2 | 12 ... 14.5 mm | |
| Seal combination S1+S2+S3 | 10 ... 12 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M25 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 105 g | |
| Dimensions | ||
| Width across corners (D2) | 31.5 mm | |
| Diameter thru-hole (DT) | 25 ... 25.2 mm | |
| Flexible conduit, max. outer diameter (FC1) | 27.5 mm | |
| Flexible conduit, inner diameter (FC2) | 0.75 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 40 mm | |
| Width across flats (SW1) | 28 mm | |
| Width across flats (SW2) | 29 mm | |
| Width across flats (SW3) | 29 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 56 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 22 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 25 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 10 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 14 ... 24 mm | |
| Seal combination S1 | 20 ... 24 mm | |
| Seal combination S1+S2 | 17 ... 20 mm | |
| Seal combination S1+S2+S3 | 14 ... 17 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M32 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 126 g | |
| Dimensions | ||
| Width across corners (D2) | 39.8 mm | |
| Diameter thru-hole (DT) | 32 ... 32.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 34.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 45 mm | |
| Width across flats (SW1) | 35 mm | |
| Width across flats (SW2) | 36 mm | |
| Width across flats (SW3) | 36 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 61 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 20 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 23 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 28 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 14 ... 24 mm | |
| Seal combination S1 | 20 ... 24 mm | |
| Seal combination S1+S2 | 17 ... 20 mm | |
| Seal combination S1+S2+S3 | 14 ... 17 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M32 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 126 g | |
| Dimensions | ||
| Width across corners (D2) | 39.8 mm | |
| Diameter thru-hole (DT) | 32 ... 32.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 34.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 45 mm | |
| Width across flats (SW1) | 35 mm | |
| Width across flats (SW2) | 36 mm | |
| Width across flats (SW3) | 36 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 61 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 20 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 23 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 28 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 10 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M40 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 141 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 40 ... 40.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 43 mm | |
| Flexible conduit, inner diameter (FC2) | 1.25 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 52 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Width across flats (SW3) | 45 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 70 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M40 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 141 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 40 ... 40.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 43 mm | |
| Flexible conduit, inner diameter (FC2) | 1.25 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 52 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Width across flats (SW3) | 45 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 70 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 352 g | |
| Dimensions | ||
| Width across corners (D2) | 59 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 49.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1.5 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 58 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 52 mm | |
| Width across flats (SW3) | 52 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 76 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 352 g | |
| Dimensions | ||
| Width across corners (D2) | 59 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 49.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1.5 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 58 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 52 mm | |
| Width across flats (SW3) | 52 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 76 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 2 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 35 ... 45 mm | |
| Seal combination S1 | 41 ... 45 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 468 g | |
| Dimensions | ||
| Width across corners (D2) | 72 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 62.5 mm | |
| Flexible conduit, inner diameter (FC2) | 2 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 56.5 mm | |
| Width across flats (SW1) | 68 mm | |
| Width across flats (SW2) | 65 mm | |
| Width across flats (SW3) | 65 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 74.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 35 ... 45 mm | |
| Seal combination S1 | 41 ... 45 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 468 g | |
| Dimensions | ||
| Width across corners (D2) | 72 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 62.5 mm | |
| Flexible conduit, inner diameter (FC2) | 2 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 56.5 mm | |
| Width across flats (SW1) | 68 mm | |
| Width across flats (SW2) | 65 mm | |
| Width across flats (SW3) | 65 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 74.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 2 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 46 ... 59 mm | |
| Seal combination S1 | 57 ... 59 mm | |
| Seal combination S1+S2 | 51 ... 57 mm | |
| Seal combination S1+S2+S3 | 46 ... 51 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M75 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 885 g | |
| Dimensions | ||
| Width across corners (D2) | 89 mm | |
| Diameter thru-hole (DT) | 75 ... 75.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 75 mm | |
| Flexible conduit, inner diameter (FC2) | 2.5 inch | |
| Flexible conduit, corrugation size (FC3) | 6.5 mm | |
| Length outside enclosure (H) | 65.5 mm | |
| Width across flats (SW1) | 80 mm | |
| Width across flats (SW2) | 80 mm | |
| Width across flats (SW3) | 80 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 85.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 30 Nm | |
| Nut torque 2 with seal S1 (SW2) | 150 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 175 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 185 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 46 ... 59 mm | |
| Seal combination S1 | 57 ... 59 mm | |
| Seal combination S1+S2 | 51 ... 57 mm | |
| Seal combination S1+S2+S3 | 46 ... 51 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M75 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 885 g | |
| Dimensions | ||
| Width across corners (D2) | 89 mm | |
| Diameter thru-hole (DT) | 75 ... 75.3 mm | |
| Flexible conduit, max. outer diameter (FC1) | 75 mm | |
| Flexible conduit, inner diameter (FC2) | 2.5 inch | |
| Flexible conduit, corrugation size (FC3) | 6.5 mm | |
| Length outside enclosure (H) | 65.5 mm | |
| Width across flats (SW1) | 80 mm | |
| Width across flats (SW2) | 80 mm | |
| Width across flats (SW3) | 80 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 85.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 30 Nm | |
| Nut torque 2 with seal S1 (SW2) | 150 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 175 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 185 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 2 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 362 g | |
| Dimensions | ||
| Width across corners (D2) | 59 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Flexible conduit, max. outer diameter (FC1) | 49.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1.5 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 78 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 52 mm | |
| Width across flats (SW3) | 52 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 78 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 10 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 362 g | |
| Dimensions | ||
| Width across corners (D2) | 59 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Flexible conduit, max. outer diameter (FC1) | 49.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1.5 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 78 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 52 mm | |
| Width across flats (SW3) | 52 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 78 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 10 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 2 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 142 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Flexible conduit, max. outer diameter (FC1) | 43 mm | |
| Flexible conduit, inner diameter (FC2) | 1.25 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 72 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Width across flats (SW3) | 45 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 72 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 9 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 142 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Flexible conduit, max. outer diameter (FC1) | 43 mm | |
| Flexible conduit, inner diameter (FC2) | 1.25 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 72 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Width across flats (SW3) | 45 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 72 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 9 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 14 ... 24 mm | |
| Seal combination S1 | 20 ... 24 mm | |
| Seal combination S1+S2 | 17 ... 20 mm | |
| Seal combination S1+S2+S3 | 14 ... 17 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 127 g | |
| Dimensions | ||
| Width across corners (D2) | 39.8 mm | |
| Diameter thru-hole (DT) | 33.5 ... 33.7 mm | |
| Flexible conduit, max. outer diameter (FC1) | 34.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 65 mm | |
| Width across flats (SW1) | 35 mm | |
| Width across flats (SW2) | 36 mm | |
| Width across flats (SW3) | 36 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 65 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 8 Nm | |
| Nut torque 2 with seal S1 (SW2) | 20 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 23 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 28 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 14 ... 24 mm | |
| Seal combination S1 | 20 ... 24 mm | |
| Seal combination S1+S2 | 17 ... 20 mm | |
| Seal combination S1+S2+S3 | 14 ... 17 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 127 g | |
| Dimensions | ||
| Width across corners (D2) | 39.8 mm | |
| Diameter thru-hole (DT) | 33.5 ... 33.7 mm | |
| Flexible conduit, max. outer diameter (FC1) | 34.5 mm | |
| Flexible conduit, inner diameter (FC2) | 1 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 65 mm | |
| Width across flats (SW1) | 35 mm | |
| Width across flats (SW2) | 36 mm | |
| Width across flats (SW3) | 36 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 65 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 8 Nm | |
| Nut torque 2 with seal S1 (SW2) | 20 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 23 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 28 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 10 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 48 g | |
| Dimensions | ||
| Width across corners (D2) | 26.5 mm | |
| Diameter thru-hole (DT) | 21.4 ... 21.6 mm | |
| Flexible conduit, max. outer diameter (FC1) | 22.2 mm | |
| Flexible conduit, inner diameter (FC2) | 0.5 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 52.5 mm | |
| Width across flats (SW1) | 24 mm | |
| Width across flats (SW2) | 24 mm | |
| Width across flats (SW3) | 24 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 52.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 4 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 48 g | |
| Dimensions | ||
| Width across corners (D2) | 26.5 mm | |
| Diameter thru-hole (DT) | 21.4 ... 21.6 mm | |
| Flexible conduit, max. outer diameter (FC1) | 22.2 mm | |
| Flexible conduit, inner diameter (FC2) | 0.5 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 52.5 mm | |
| Width across flats (SW1) | 22 mm | |
| Width across flats (SW2) | 24 mm | |
| Width across flats (SW3) | 24 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 52.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 4 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 15 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 35 ... 45 mm | |
| Seal combination S1 | 41 ... 45 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 468 g | |
| Dimensions | ||
| Width across corners (D2) | 72 mm | |
| Diameter thru-hole (DT) | 60.4 ... 60.7 mm | |
| Flexible conduit, max. outer diameter (FC1) | 62.5 mm | |
| Flexible conduit, inner diameter (FC2) | 2 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 76.5 mm | |
| Width across flats (SW1) | 68 mm | |
| Width across flats (SW2) | 65 mm | |
| Width across flats (SW3) | 65 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 76.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 16 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 35 ... 45 mm | |
| Seal combination S1 | 41 ... 45 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 468 g | |
| Dimensions | ||
| Width across corners (D2) | 72 mm | |
| Diameter thru-hole (DT) | 60.4 ... 60.7 mm | |
| Flexible conduit, max. outer diameter (FC1) | 62.5 mm | |
| Flexible conduit, inner diameter (FC2) | 2 inch | |
| Flexible conduit, corrugation size (FC3) | 6 mm | |
| Length outside enclosure (H) | 76.5 mm | |
| Width across flats (SW1) | 68 mm | |
| Width across flats (SW2) | 65 mm | |
| Width across flats (SW3) | 65 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 76.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 16 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 2 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 10 ... 18 mm | |
| Seal combination S1 | 14.5 ... 18 mm | |
| Seal combination S1+S2 | 12 ... 14.5 mm | |
| Seal combination S1+S2+S3 | 10 ... 12 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 3/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 106 g | |
| Dimensions | ||
| Width across corners (D2) | 31.5 mm | |
| Diameter thru-hole (DT) | 26.7 ... 26.9 mm | |
| Flexible conduit, max. outer diameter (FC1) | 27.5 mm | |
| Flexible conduit, inner diameter (FC2) | 0.75 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 56 mm | |
| Width across flats (SW1) | 28 mm | |
| Width across flats (SW2) | 29 mm | |
| Width across flats (SW3) | 29 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 56 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5.5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 22 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 25 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 10 ... 18 mm | |
| Seal combination S1 | 14.5 ... 18 mm | |
| Seal combination S1+S2 | 12 ... 14.5 mm | |
| Seal combination S1+S2+S3 | 10 ... 12 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 3/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 106 g | |
| Dimensions | ||
| Width across corners (D2) | 31.5 mm | |
| Diameter thru-hole (DT) | 26.7 ... 26.9 mm | |
| Flexible conduit, max. outer diameter (FC1) | 27.5 mm | |
| Flexible conduit, inner diameter (FC2) | 0.75 inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 56 mm | |
| Width across flats (SW1) | 28 mm | |
| Width across flats (SW2) | 29 mm | |
| Width across flats (SW3) | 29 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 56 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5.5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 22 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 25 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 10 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 3/8'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 48 g | |
| Dimensions | ||
| Width across corners (D2) | 26.5 mm | |
| Diameter thru-hole (DT) | 17.2 ... 17.4 mm | |
| Flexible conduit, max. outer diameter (FC1) | 22.2 mm | |
| Flexible conduit, inner diameter (FC2) | 0.5 nm inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 56 mm | |
| Width across flats (SW1) | 22 mm | |
| Width across flats (SW2) | 24 mm | |
| Width across flats (SW3) | 24 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 56 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 3 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables in flexible conduit | |
| Clamping range (D) | 4 ... 12 mm | |
| Seal combination S1 | 9 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 9 mm | |
| Seal combination S1+S2+S3 | 4 ... 6 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 3/8'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 48 g | |
| Dimensions | ||
| Width across corners (D2) | 26.5 mm | |
| Diameter thru-hole (DT) | 17.2 ... 17.4 mm | |
| Flexible conduit, max. outer diameter (FC1) | 22.2 mm | |
| Flexible conduit, inner diameter (FC2) | 0.5 nm inch | |
| Flexible conduit, corrugation size (FC3) | 4.5 mm | |
| Length outside enclosure (H) | 56 mm | |
| Width across flats (SW1) | 22 mm | |
| Width across flats (SW2) | 24 mm | |
| Width across flats (SW3) | 24 mm | |
| Thread length (TL) | 16 mm | |
| Total length (L) | 56 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 3 Nm | |
| Nut torque 2 with seal S1 (SW2) | 16 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 20 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 15 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Товаров: 0
На сумму: 0