Атол 30Ф не включается (заводской брак)
Валерий
14 января 2022
Запчасти и компоненты для торгового оборудования. Более 8 000 клиентов и более 1 000 000 товаров! Скрыть
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M40 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 211 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 40 ... 40.3 mm | |
| Length outside enclosure (H) | 27 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 45 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking |  II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M32-M40S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M40 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 214 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 40 ... 40.3 mm | |
| Length outside enclosure (H) | 27 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 45 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M32-M40S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 22 ... 32 mm | |
| Seal combination S1 | 27 ... 32 mm | |
| Seal combination S1+S2 | 24 ... 27 mm | |
| Seal combination S1+S2+S3 | 22 ... 24 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M40 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 214 g | |
| Dimensions | ||
| Width across corners (D2) | 50 mm | |
| Diameter thru-hole (DT) | 40 ... 40.3 mm | |
| Length outside enclosure (H) | 27 mm | |
| Width across flats (SW1) | 45 mm | |
| Width across flats (SW2) | 45 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 45 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 45 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 56 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M32-M40S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 44 mm | |
| Seal combination S1 | 41 ... 44 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 438 g | |
| Dimensions | ||
| Width across corners (D2) | 70 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Length outside enclosure (H) | 45 mm | |
| Width across flats (SW1) | 64 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 63 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 44 mm | |
| Seal combination S1 | 41 ... 44 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 438 g | |
| Dimensions | ||
| Width across corners (D2) | 70 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Length outside enclosure (H) | 45 mm | |
| Width across flats (SW1) | 64 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 63 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 4 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 44 mm | |
| Seal combination S1 | 41 ... 44 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 412 g | |
| Dimensions | ||
| Width across corners (D2) | 70 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Length outside enclosure (H) | 45 mm | |
| Width across flats (SW1) | 64 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 63 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 44 mm | |
| Seal combination S1 | 41 ... 44 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 412 g | |
| Dimensions | ||
| Width across corners (D2) | 70 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Length outside enclosure (H) | 45 mm | |
| Width across flats (SW1) | 64 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 63 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 4 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 327 g | |
| Dimensions | ||
| Width across corners (D2) | 61 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Length outside enclosure (H) | 28 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 46 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 327 g | |
| Dimensions | ||
| Width across corners (D2) | 61 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Length outside enclosure (H) | 28 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 46 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 316 g | |
| Dimensions | ||
| Width across corners (D2) | 61 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Length outside enclosure (H) | 28 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 46 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 316 g | |
| Dimensions | ||
| Width across corners (D2) | 61 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Length outside enclosure (H) | 28 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 46 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 46 ... 56 mm | |
| Seal combination S1 | 52 ... 56 mm | |
| Seal combination S1+S2 | 48 ... 52 mm | |
| Seal combination S1+S2+S3 | 46 ... 48 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 716 g | |
| Dimensions | ||
| Width across corners (D2) | 89 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Length outside enclosure (H) | 44 mm | |
| Width across flats (SW1) | 75 mm | |
| Width across flats (SW2) | 80 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 62 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 135 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 145 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 160 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M63-M75S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 46 ... 56 mm | |
| Seal combination S1 | 52 ... 56 mm | |
| Seal combination S1+S2 | 48 ... 52 mm | |
| Seal combination S1+S2+S3 | 46 ... 48 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 716 g | |
| Dimensions | ||
| Width across corners (D2) | 89 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Length outside enclosure (H) | 44 mm | |
| Width across flats (SW1) | 75 mm | |
| Width across flats (SW2) | 80 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 62 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 135 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 145 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 160 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 2 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M63-M75S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 46 ... 56 mm | |
| Seal combination S1 | 52 ... 56 mm | |
| Seal combination S1+S2 | 48 ... 52 mm | |
| Seal combination S1+S2+S3 | 46 ... 48 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 779 g | |
| Dimensions | ||
| Width across corners (D2) | 89 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Length outside enclosure (H) | 44 mm | |
| Width across flats (SW1) | 75 mm | |
| Width across flats (SW2) | 80 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 62 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 135 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 145 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 160 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M63-M75S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 46 ... 56 mm | |
| Seal combination S1 | 52 ... 56 mm | |
| Seal combination S1+S2 | 48 ... 52 mm | |
| Seal combination S1+S2+S3 | 46 ... 48 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 779 g | |
| Dimensions | ||
| Width across corners (D2) | 89 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Length outside enclosure (H) | 44 mm | |
| Width across flats (SW1) | 75 mm | |
| Width across flats (SW2) | 80 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 62 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 135 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 145 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 160 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 2 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M63-M75S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 45 mm | |
| Seal combination S1 | 41 ... 45 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 468 g | |
| Dimensions | ||
| Width across corners (D2) | 75 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 68 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 53 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 45 mm | |
| Seal combination S1 | 41 ... 45 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 468 g | |
| Dimensions | ||
| Width across corners (D2) | 75 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 68 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 53 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 4 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 45 mm | |
| Seal combination S1 | 41 ... 45 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 464 g | |
| Dimensions | ||
| Width across corners (D2) | 75 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 68 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 53 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland washer gasket locknut earth tag shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 45 mm | |
| Seal combination S1 | 41 ... 45 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 464 g | |
| Dimensions | ||
| Width across corners (D2) | 75 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 68 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 53 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 25 Nm | |
| Nut torque 2 with seal S1 (SW2) | 140 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 4 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 41 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 422 g | |
| Dimensions | ||
| Width across corners (D2) | 70 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Length outside enclosure (H) | 43 mm | |
| Width across flats (SW1) | 64 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 63 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 41 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 422 g | |
| Dimensions | ||
| Width across corners (D2) | 70 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Length outside enclosure (H) | 43 mm | |
| Width across flats (SW1) | 64 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 63 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 4 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 41 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 352 g | |
| Dimensions | ||
| Width across corners (D2) | 70 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Length outside enclosure (H) | 43 mm | |
| Width across flats (SW1) | 64 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 63 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 35 ... 41 mm | |
| Seal combination S1+S2 | 38 ... 41 mm | |
| Seal combination S1+S2+S3 | 35 ... 38 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 352 g | |
| Dimensions | ||
| Width across corners (D2) | 70 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Length outside enclosure (H) | 43 mm | |
| Width across flats (SW1) | 64 mm | |
| Width across flats (SW2) | 64 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 63 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 155 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 190 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 4 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M50-M63S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 343 g | |
| Dimensions | ||
| Width across corners (D2) | 61 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Length outside enclosure (H) | 26 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 46 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 343 g | |
| Dimensions | ||
| Width across corners (D2) | 61 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Length outside enclosure (H) | 26 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 46 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 328 g | |
| Dimensions | ||
| Width across corners (D2) | 61 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Length outside enclosure (H) | 26 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 46 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 35 mm | |
| Seal combination S1 | 31 ... 35 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/2'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 328 g | |
| Dimensions | ||
| Width across corners (D2) | 61 mm | |
| Diameter thru-hole (DT) | 48.3 ... 48.5 mm | |
| Length outside enclosure (H) | 26 mm | |
| Width across flats (SW1) | 55 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 46 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 18 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 34 mm | |
| Seal combination S1 | 31 ... 34 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 292 g | |
| Dimensions | ||
| Width across corners (D2) | 55.5 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 50 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 55 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 34 mm | |
| Seal combination S1 | 31 ... 34 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | brass, nickel-plated | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 292 g | |
| Dimensions | ||
| Width across corners (D2) | 55.5 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 50 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 55 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 50 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 26 ... 34 mm | |
| Seal combination S1 | 31 ... 34 mm | |
| Seal combination S1+S2 | 28 ... 31 mm | |
| Seal combination S1+S2+S3 | 26 ... 28 mm | |
| Thread type | NPT ANSI ASME B1.20.1 | |
| Thread size (TD) | NPT 1-1/4'' | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Cable gland | stainless steel | |
| Washer gasket | aramid fibers bonded with NBR | |
| O-Ring | chloroprene | |
| Seal insert | chloroprene | |
| Mass | 285 g | |
| Dimensions | ||
| Width across corners (D2) | 55.5 mm | |
| Diameter thru-hole (DT) | 42.2 ... 42.4 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 50 mm | |
| Width across flats (SW2) | 50 mm | |
| Thread length (TL) | 20 mm | |
| Total length (L) | 55 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 12 Nm | |
| Nut torque 2 with seal S1 (SW2) | 52 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 55 Nm | |
| Nut torque 2 with seals S1+S2+S3 (SW2) | 57 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) washer gasket -40 ... 80 °C (-40 ... 176 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex d IIC Gb Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 1 | |
| Scope of delivery | Cable gland shroud PVC brief instructions | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.NA.M40-M50S.PA | |
Товаров: 0
На сумму: 0