Атол 30Ф не включается (заводской брак)
Валерий
14 января 2022
Запчасти и компоненты для торгового оборудования. Более 8 500 клиентов и более 1 000 000 товаров! Скрыть
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 10 ... 18 mm | |
| Seal combination S1 | 13 ... 18 mm | |
| Seal combination S1+S2 | 10 ... 13 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M25 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | black | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 17 g | |
| Dimensions | ||
| Width across corners (D2) | 37 mm | |
| Diameter thru-hole (DT) | 25 ... 25.2 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 33 mm | |
| Width across flats (SW2) | 33 mm | |
| Thread length (TL) | 15 mm | |
| Total length (L) | 50 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 8 Nm | |
| Nut torque 2 with seal S1 (SW2) | 8 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 5.5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking |  II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 25 | |
| Scope of delivery | Cable gland brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M25L-M32S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 12 ... 21 mm | |
| Seal combination S1 | 16 ... 21 mm | |
| Seal combination S1+S2 | 12 ... 16 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M32 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | black | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 26 g | |
| Dimensions | ||
| Width across corners (D2) | 41 mm | |
| Diameter thru-hole (DT) | 32 ... 32.3 mm | |
| Length outside enclosure (H) | 42 mm | |
| Width across flats (SW1) | 36 mm | |
| Width across flats (SW2) | 36 mm | |
| Thread length (TL) | 10 mm | |
| Total length (L) | 52 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 6 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 4.5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 20 | |
| Scope of delivery | Cable gland brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M32.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 12 ... 21 mm | |
| Seal combination S1 | 16 ... 21 mm | |
| Seal combination S1+S2 | 12 ... 16 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M32 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | black | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 26 g | |
| Dimensions | ||
| Width across corners (D2) | 41 mm | |
| Diameter thru-hole (DT) | 32 ... 32.3 mm | |
| Length outside enclosure (H) | 42 mm | |
| Width across flats (SW1) | 36 mm | |
| Width across flats (SW2) | 36 mm | |
| Thread length (TL) | 15 mm | |
| Total length (L) | 52 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 6 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 4.5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 20 | |
| Scope of delivery | Cable gland brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M32.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 14 ... 25 mm | |
| Seal combination S1 | 20 ... 25 mm | |
| Seal combination S1+S2 | 14 ... 20 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M32 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | black | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 26 g | |
| Dimensions | ||
| Width across corners (D2) | 47.5 mm | |
| Diameter thru-hole (DT) | 32 ... 32.3 mm | |
| Length outside enclosure (H) | 40.5 mm | |
| Width across flats (SW1) | 42 mm | |
| Width across flats (SW2) | 42 mm | |
| Thread length (TL) | 15 mm | |
| Total length (L) | 55.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 9 Nm | |
| Nut torque 2 with seal S1 (SW2) | 9 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 8 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 20 | |
| Scope of delivery | Cable gland brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M32L.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 17 ... 28 mm | |
| Seal combination S1 | 21 ... 28 mm | |
| Seal combination S1+S2 | 17 ... 21 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M40 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | black | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 45 g | |
| Dimensions | ||
| Width across corners (D2) | 52 mm | |
| Diameter thru-hole (DT) | 40 ... 40.3 mm | |
| Length outside enclosure (H) | 46 mm | |
| Width across flats (SW1) | 46 mm | |
| Width across flats (SW2) | 46 mm | |
| Thread length (TL) | 10 mm | |
| Total length (L) | 56 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 5 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 10 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M40.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 17 ... 28 mm | |
| Seal combination S1 | 21 ... 28 mm | |
| Seal combination S1+S2 | 17 ... 21 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M40 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | black | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 45 g | |
| Dimensions | ||
| Width across corners (D2) | 52 mm | |
| Diameter thru-hole (DT) | 40 ... 40.3 mm | |
| Length outside enclosure (H) | 46 mm | |
| Width across flats (SW1) | 46 mm | |
| Width across flats (SW2) | 46 mm | |
| Thread length (TL) | 15 mm | |
| Total length (L) | 61 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 5 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 10 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M40.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 22 ... 38 mm | |
| Seal combination S1 | 31 ... 38 mm | |
| Seal combination S1+S2 | 22 ... 31 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | black | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 93 g | |
| Dimensions | ||
| Width across corners (D2) | 67.5 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Length outside enclosure (H) | 54 mm | |
| Width across flats (SW1) | 60 mm | |
| Width across flats (SW2) | 60 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 72 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 22 Nm | |
| Nut torque 2 with seal S1 (SW2) | 22 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M50.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 28 ... 44 mm | |
| Seal combination S1 | 35 ... 44 mm | |
| Seal combination S1+S2 | 28 ... 35 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | black | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 93 g | |
| Dimensions | ||
| Width across corners (D2) | 72 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Length outside enclosure (H) | 54 mm | |
| Width across flats (SW1) | 65 mm | |
| Width across flats (SW2) | 65 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 72 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 24 Nm | |
| Nut torque 2 with seal S1 (SW2) | 24 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 22 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M63.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 3 ... 6.5 mm | |
| Seal combination S1 | 4 ... 6.5 mm | |
| Seal combination S1+S2 | 3 ... 4 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M12 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 7 g | |
| Dimensions | ||
| Width across corners (D2) | 17 mm | |
| Diameter thru-hole (DT) | 12 ... 12.2 mm | |
| Length outside enclosure (H) | 22 mm | |
| Width across flats (SW1) | 15 mm | |
| Width across flats (SW2) | 15 mm | |
| Thread length (TL) | 10 mm | |
| Total length (L) | 32 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 2 Nm | |
| Nut torque 2 with seal S1 (SW2) | 2 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 1 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 50 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M12.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 3 ... 6.5 mm | |
| Seal combination S1 | 4 ... 6.5 mm | |
| Seal combination S1+S2 | 3 ... 4 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M12 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 7 g | |
| Dimensions | ||
| Width across corners (D2) | 17 mm | |
| Diameter thru-hole (DT) | 12 ... 12.2 mm | |
| Length outside enclosure (H) | 22 mm | |
| Width across flats (SW1) | 15 mm | |
| Width across flats (SW2) | 15 mm | |
| Thread length (TL) | 15 mm | |
| Total length (L) | 37 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 2 Nm | |
| Nut torque 2 with seal S1 (SW2) | 2 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 1 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 50 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M12.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 4 ... 10 mm | |
| Seal combination S1 | 6 ... 10 mm | |
| Seal combination S1+S2 | 4 ... 6 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M16 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 12 g | |
| Dimensions | ||
| Width across corners (D2) | 25 mm | |
| Diameter thru-hole (DT) | 16 ... 16.2 mm | |
| Length outside enclosure (H) | 26 mm | |
| Width across flats (SW1) | 22 mm | |
| Width across flats (SW2) | 22 mm | |
| Thread length (TL) | 10 mm | |
| Total length (L) | 36 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 4 Nm | |
| Nut torque 2 with seal S1 (SW2) | 4 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 3.5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 50 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M16-M20S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 4 ... 8 mm | |
| Seal combination S1 | 5 ... 8 mm | |
| Seal combination S1+S2 | 4 ... 5 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M16 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 10 g | |
| Dimensions | ||
| Width across corners (D2) | 21.3 mm | |
| Diameter thru-hole (DT) | 16 ... 16.2 mm | |
| Length outside enclosure (H) | 26 mm | |
| Width across flats (SW1) | 19 mm | |
| Width across flats (SW2) | 19 mm | |
| Thread length (TL) | 10 mm | |
| Total length (L) | 36 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 4 Nm | |
| Nut torque 2 with seal S1 (SW2) | 4 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 3.5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 50 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M16S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 4 ... 8 mm | |
| Seal combination S1 | 5 ... 8 mm | |
| Seal combination S1+S2 | 4 ... 5 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M16 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 10 g | |
| Dimensions | ||
| Width across corners (D2) | 21.3 mm | |
| Diameter thru-hole (DT) | 16 ... 16.2 mm | |
| Length outside enclosure (H) | 26 mm | |
| Width across flats (SW1) | 19 mm | |
| Width across flats (SW2) | 19 mm | |
| Thread length (TL) | 15 mm | |
| Total length (L) | 41 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 4 Nm | |
| Nut torque 2 with seal S1 (SW2) | 4 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 3.5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 50 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M16S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 6 ... 12 mm | |
| Seal combination S1 | 7.5 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 7.5 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M20 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 13 g | |
| Dimensions | ||
| Width across corners (D2) | 27.5 mm | |
| Diameter thru-hole (DT) | 20 ... 20.2 mm | |
| Length outside enclosure (H) | 30 mm | |
| Width across flats (SW1) | 24 mm | |
| Width across flats (SW2) | 24 mm | |
| Thread length (TL) | 10 mm | |
| Total length (L) | 40 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 5 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 50 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M20.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 6 ... 12 mm | |
| Seal combination S1 | 7.5 ... 12 mm | |
| Seal combination S1+S2 | 6 ... 7.5 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M20 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 13 g | |
| Dimensions | ||
| Width across corners (D2) | 27.5 mm | |
| Diameter thru-hole (DT) | 20 ... 20.2 mm | |
| Length outside enclosure (H) | 30 mm | |
| Width across flats (SW1) | 24 mm | |
| Width across flats (SW2) | 24 mm | |
| Thread length (TL) | 15 mm | |
| Total length (L) | 45 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 5 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 50 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M20.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 9 ... 17 mm | |
| Seal combination S1 | 13 ... 17 mm | |
| Seal combination S1+S2 | 9 ... 13 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M25 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 17 g | |
| Dimensions | ||
| Width across corners (D2) | 32.5 mm | |
| Diameter thru-hole (DT) | 25 ... 25.2 mm | |
| Length outside enclosure (H) | 34 mm | |
| Width across flats (SW1) | 29 mm | |
| Width across flats (SW2) | 29 mm | |
| Thread length (TL) | 10 mm | |
| Total length (L) | 44 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 5 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 25 | |
| Scope of delivery | Cable gland brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M25.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 9 ... 17 mm | |
| Seal combination S1 | 13 ... 17 mm | |
| Seal combination S1+S2 | 9 ... 13 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M25 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 17 g | |
| Dimensions | ||
| Width across corners (D2) | 32.5 mm | |
| Diameter thru-hole (DT) | 25 ... 25.2 mm | |
| Length outside enclosure (H) | 34 mm | |
| Width across flats (SW1) | 29 mm | |
| Width across flats (SW2) | 29 mm | |
| Thread length (TL) | 15 mm | |
| Total length (L) | 44 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 5 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 25 | |
| Scope of delivery | Cable gland brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M25.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 10 ... 18 mm | |
| Seal combination S1 | 13 ... 18 mm | |
| Seal combination S1+S2 | 10 ... 13 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M25 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 17 g | |
| Dimensions | ||
| Width across corners (D2) | 37 mm | |
| Diameter thru-hole (DT) | 25 ... 25.2 mm | |
| Length outside enclosure (H) | 35 mm | |
| Width across flats (SW1) | 33 mm | |
| Width across flats (SW2) | 33 mm | |
| Thread length (TL) | 15 mm | |
| Total length (L) | 50 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 8 Nm | |
| Nut torque 2 with seal S1 (SW2) | 8 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 5.5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 25 | |
| Scope of delivery | Cable gland brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M25L-M32S.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 12 ... 21 mm | |
| Seal combination S1 | 16 ... 21 mm | |
| Seal combination S1+S2 | 12 ... 16 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M32 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 26 g | |
| Dimensions | ||
| Width across corners (D2) | 41 mm | |
| Diameter thru-hole (DT) | 32 ... 32.3 mm | |
| Length outside enclosure (H) | 42 mm | |
| Width across flats (SW1) | 36 mm | |
| Width across flats (SW2) | 36 mm | |
| Thread length (TL) | 10 mm | |
| Total length (L) | 52 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 6 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 4.5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 20 | |
| Scope of delivery | Cable gland brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M32.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 12 ... 21 mm | |
| Seal combination S1 | 16 ... 21 mm | |
| Seal combination S1+S2 | 12 ... 16 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M32 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 26 g | |
| Dimensions | ||
| Width across corners (D2) | 41 mm | |
| Diameter thru-hole (DT) | 32 ... 32.3 mm | |
| Length outside enclosure (H) | 42 mm | |
| Width across flats (SW1) | 36 mm | |
| Width across flats (SW2) | 36 mm | |
| Thread length (TL) | 15 mm | |
| Total length (L) | 52 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 6 Nm | |
| Nut torque 2 with seal S1 (SW2) | 6 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 4.5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 20 | |
| Scope of delivery | Cable gland brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M32.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 14 ... 25 mm | |
| Seal combination S1 | 20 ... 25 mm | |
| Seal combination S1+S2 | 14 ... 20 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M32 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 26 g | |
| Dimensions | ||
| Width across corners (D2) | 47.5 mm | |
| Diameter thru-hole (DT) | 32 ... 32.3 mm | |
| Length outside enclosure (H) | 40.5 mm | |
| Width across flats (SW1) | 42 mm | |
| Width across flats (SW2) | 42 mm | |
| Thread length (TL) | 15 mm | |
| Total length (L) | 55.5 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 9 Nm | |
| Nut torque 2 with seal S1 (SW2) | 9 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 8 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 20 | |
| Scope of delivery | Cable gland brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M32L.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 17 ... 28 mm | |
| Seal combination S1 | 21 ... 28 mm | |
| Seal combination S1+S2 | 17 ... 21 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M40 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 45 g | |
| Dimensions | ||
| Width across corners (D2) | 52 mm | |
| Diameter thru-hole (DT) | 40 ... 40.3 mm | |
| Length outside enclosure (H) | 46 mm | |
| Width across flats (SW1) | 46 mm | |
| Width across flats (SW2) | 46 mm | |
| Thread length (TL) | 10 mm | |
| Total length (L) | 56 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 5 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 10 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M40.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 17 ... 28 mm | |
| Seal combination S1 | 21 ... 28 mm | |
| Seal combination S1+S2 | 17 ... 21 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M40 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 45 g | |
| Dimensions | ||
| Width across corners (D2) | 52 mm | |
| Diameter thru-hole (DT) | 40 ... 40.3 mm | |
| Length outside enclosure (H) | 46 mm | |
| Width across flats (SW1) | 46 mm | |
| Width across flats (SW2) | 46 mm | |
| Thread length (TL) | 15 mm | |
| Total length (L) | 61 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 5 Nm | |
| Nut torque 2 with seal S1 (SW2) | 5 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 5 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 10 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M40.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 22 ... 38 mm | |
| Seal combination S1 | 31 ... 38 mm | |
| Seal combination S1+S2 | 22 ... 31 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M50 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 93 g | |
| Dimensions | ||
| Width across corners (D2) | 67.5 mm | |
| Diameter thru-hole (DT) | 50 ... 50.3 mm | |
| Length outside enclosure (H) | 54 mm | |
| Width across flats (SW1) | 60 mm | |
| Width across flats (SW2) | 60 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 72 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 22 Nm | |
| Nut torque 2 with seal S1 (SW2) | 22 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 18 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M50.PA | |
| Mechanical specifications | ||
|---|---|---|
| Cable type | non-armored cables | |
| Clamping range (D) | 28 ... 44 mm | |
| Seal combination S1 | 35 ... 44 mm | |
| Seal combination S1+S2 | 28 ... 35 mm | |
| Thread type | metric ISO pitch 1.5 mm | |
| Thread size (TD) | M63 | |
| Degree of protection | IP66 / IP68 | |
| Material | ||
| Endcaps | blue | |
| Cable gland | high impact-resistant polyamide | |
| Washer gasket | flat chloroprene gasket | |
| Seal insert | chloroprene | |
| Mass | 93 g | |
| Dimensions | ||
| Width across corners (D2) | 72 mm | |
| Diameter thru-hole (DT) | 63 ... 63.3 mm | |
| Length outside enclosure (H) | 54 mm | |
| Width across flats (SW1) | 65 mm | |
| Width across flats (SW2) | 65 mm | |
| Thread length (TL) | 18 mm | |
| Total length (L) | 72 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | 24 Nm | |
| Nut torque 2 with seal S1 (SW2) | 24 Nm | |
| Nut torque 2 with seals S1+S2 (SW2) | 22 Nm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 15 ATEX 006 X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 15.0001X | |
| EAC approval | TC RU C-TR.GB05.B.00918 | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Delivery quantity | 5 | |
| Scope of delivery | Cable glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Accessories | ||
| Sealing plugs | BP.PDS.M63.PA | |
| Mechanical specifications | ||
|---|---|---|
| Degree of protection | IP66 / IP68 | |
| Material | Polyamide (PA) | |
| Finish | inherent color green | |
| Mass | 0.1 g | |
| Dimensions | ||
| Diameter (D) | 5.8 mm | |
| Outer diameter (DO) | 15 mm | |
| Length of pin (PL) | 10 mm | |
| Total length (L) | 14 mm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Note | For exact reference to types and sizes of cable glands please refer to the specific datasheets | |
| Delivery quantity | 50 | |
| Scope of delivery | Sealing Plugs for metal Cable Glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Degree of protection | IP66 / IP68 | |
| Material | Polyamide (PA) | |
| Finish | inherent color green | |
| Mass | 0.15 g | |
| Dimensions | ||
| Diameter (D) | 11.8 mm | |
| Outer diameter (DO) | 21.5 mm | |
| Length of pin (PL) | 15 mm | |
| Total length (L) | 21 mm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Note | For exact reference to types and sizes of cable glands please refer to the specific datasheets | |
| Delivery quantity | 25 | |
| Scope of delivery | Sealing Plugs for metal Cable Glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Degree of protection | IP66 / IP68 | |
| Material | Polyamide (PA) | |
| Finish | inherent color green | |
| Mass | 1.8 g | |
| Dimensions | ||
| Diameter (D) | 16.8 mm | |
| Outer diameter (DO) | 27.5 mm | |
| Length of pin (PL) | 17 mm | |
| Total length (L) | 25 mm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Note | For exact reference to types and sizes of cable glands please refer to the specific datasheets | |
| Delivery quantity | 15 | |
| Scope of delivery | Sealing Plugs for metal Cable Glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Degree of protection | IP66 / IP68 | |
| Material | Polyamide (PA) | |
| Finish | inherent color green | |
| Mass | 2 g | |
| Dimensions | ||
| Diameter (D) | 23.8 mm | |
| Outer diameter (DO) | 36 mm | |
| Length of pin (PL) | 20 mm | |
| Total length (L) | 30 mm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Note | For exact reference to types and sizes of cable glands please refer to the specific datasheets | |
| Delivery quantity | 5 | |
| Scope of delivery | Sealing Plugs for metal Cable Glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| Mechanical specifications | ||
|---|---|---|
| Degree of protection | IP66 / IP68 | |
| Material | Polyamide (PA) | |
| Finish | inherent color green | |
| Mass | 9 g | |
| Dimensions | ||
| Diameter (D) | 27.8 mm | |
| Outer diameter (DO) | 40 mm | |
| Length of pin (PL) | 24 mm | |
| Total length (L) | 34 mm | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | IMQ 14 ATEX 012X | |
| Marking | II 2 GD Ex e IIC Gb Ex tb IIIC Db | |
| International approvals | ||
| IECEx approval | IECEx IMQ 14.0004X | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| General information | ||
| Note | For exact reference to types and sizes of cable glands please refer to the specific datasheets | |
| Delivery quantity | 5 | |
| Scope of delivery | Sealing Plugs for metal Cable Glands brief instructions (1 copy) | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Товаров: 0
На сумму: 0