Атол 30Ф не включается (заводской брак)
Валерий
14 января 2022
Описание оборудования | ||
---|---|---|
Beschriftungsträger für HiC-Termination-Boards |
Описание оборудования | ||
---|---|---|
Beschriftungsträger für HiD-Termination-Boards |
Mechanical specifications | ||
---|---|---|
Material | insulating material | |
Color | red | |
Mass | approx. 1 g per coding pin | |
Dimensions | Ø4.4 x 9.5 mm (0.17 x 0.37 inch) | |
General information | ||
Packing unit | 32 item(s) (8 x 4 items) |
Supply | ||
---|---|---|
Rated voltage | 19.6 ... 30 V DC | |
Ripple | &le 10 % | |
Power dissipation | &le 500 mW , without modules | |
Reverse polarity protection | yes | |
Redundancy | ||
Supply | Redundancy available. Each supply is decoupled. | |
Fault indication output | ||
Output type | volt-free contact | |
Contact loading | 30 V DC , 1 A | |
Indicators/settings | ||
Display elements | LED Power (power supply), green LED LED Supply I (missing supply I), red LED LED Supply II (missing supply II), red LED LED Fault (fault signal), red LED | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Electromagnetic compatibility | NE 21:2012 For further information see system description. | |
Degree of protection | IEC 60529:2001 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Connection | ||
Supply | pluggable screw terminals , black | |
Fault output | pluggable screw terminals , black | |
Core cross-section | screw terminals: 0.2 ... 2.5 mm2 (24 ... 12 AWG) | |
Material | housing: polycarbonate, 10 % glass fiber reinforced | |
Mass | approx. 150 g | |
Dimensions | 50 x 200 x 60 mm (1.97 x 7.9 x 2.36 inch) , height including module assembly | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Electrical specifications | ||
---|---|---|
Rated voltage | 300 V AC/DC | |
Ambient conditions | ||
Ambient temperature | -20 ... 105 °C (-4 ... 221 °F) | |
Mechanical specifications | ||
Connection | 37 pins/32 pins | |
Material | ||
Connector | plastic/plastic | |
Cable | 22 AWG | |
Data for application in connection with hazardous areas | ||
Directive conformity | UL VM-1 flame test CSA FT4 flame test RoHS compliant |
Electrical specifications | ||
---|---|---|
Rated voltage | 300 V AC/DC | |
Ambient conditions | ||
Ambient temperature | -20 ... 105 °C (-4 ... 221 °F) | |
Mechanical specifications | ||
Connection | 37 pins/32 pins | |
Material | ||
Connector | plastic/plastic | |
Cable | 22 AWG | |
Data for application in connection with hazardous areas | ||
Directive conformity | UL VM-1 flame test CSA FT4 flame test RoHS compliant |
Electrical specifications | ||
---|---|---|
Rated voltage | 300 V AC/DC | |
Ambient conditions | ||
Ambient temperature | -20 ... 80 °C (-4 ... 176 °F) | |
Mechanical specifications | ||
Connection | 37 pins/32 pins | |
Material | ||
Connector | plastic/plastic | |
Cable | 22 AWG | |
Construction type | 22 AWG 7/0096 tinned copper 18 individual twisted pairs overall foil | |
Shielding | aluminum/poly foil 100% coverage 24 AWG 7/32 T.C. DW. | |
Data for application in connection with hazardous areas | ||
Directive conformity | UL/cULus RoHS compliant |
Electrical specifications | ||
---|---|---|
Rated voltage | 300 V AC/DC | |
Ambient conditions | ||
Ambient temperature | -20 ... 80 °C (-4 ... 176 °F) | |
Mechanical specifications | ||
Connection | 37 pins/32 pins | |
Material | ||
Connector | plastic/plastic | |
Cable | 22 AWG | |
Construction type | 22 AWG 7/0096 tinned copper 18 individual twisted pairs overall foil | |
Cable length | 10 m | |
Shielding | aluminum/poly foil 100% coverage 24 AWG 7/32 T.C. DW. | |
Data for application in connection with hazardous areas | ||
Directive conformity | UL/cULus RoHS compliant |
Electrical specifications | ||
---|---|---|
Rated voltage | 300 V AC/DC | |
Ambient conditions | ||
Ambient temperature | -20 ... 80 °C (-4 ... 176 °F) | |
Mechanical specifications | ||
Connection | 37 pins/32 pins | |
Material | ||
Connector | plastic/plastic | |
Cable | 22 AWG | |
Construction type | 22 AWG 7/0096 tinned copper 18 individual twisted pairs overall foil | |
Cable length | 15 m | |
Shielding | aluminum/poly foil 100% coverage 24 AWG 7/32 T.C. DW. | |
Data for application in connection with hazardous areas | ||
Directive conformity | UL/cULus RoHS compliant |
Electrical specifications | ||
---|---|---|
Rated voltage | 300 V AC/DC | |
Ambient conditions | ||
Ambient temperature | -20 ... 80 °C (-4 ... 176 °F) | |
Mechanical specifications | ||
Connection | 37 pins/32 pins | |
Material | ||
Connector | plastic/plastic | |
Cable | 22 AWG | |
Construction type | 22 AWG 7/0096 tinned copper 18 individual twisted pairs overall foil | |
Cable length | 20 m | |
Shielding | aluminum/poly foil 100% coverage 24 AWG 7/32 T.C. DW. | |
Data for application in connection with hazardous areas | ||
Directive conformity | UL/cULus RoHS compliant |
Electrical specifications | ||
---|---|---|
Rated voltage | 300 V AC/DC | |
Ambient conditions | ||
Ambient temperature | -20 ... 80 °C (-4 ... 176 °F) | |
Mechanical specifications | ||
Connection | 37 pins/32 pins | |
Material | ||
Connector | plastic/plastic | |
Cable | 22 AWG | |
Construction type | 22 AWG 7/0096 tinned copper 18 individual twisted pairs overall foil | |
Shielding | aluminum/poly foil 100% coverage 24 AWG 7/32 T.C. DW. | |
Data for application in connection with hazardous areas | ||
Directive conformity | UL/cULus RoHS compliant |
Electrical specifications | ||
---|---|---|
Rated voltage | 300 V AC/DC | |
Ambient conditions | ||
Ambient temperature | -20 ... 80 °C (-4 ... 176 °F) | |
Mechanical specifications | ||
Connection | 37 pins/32 pins | |
Material | ||
Connector | plastic/plastic | |
Cable | 22 AWG | |
Construction type | 22 AWG 7/0096 tinned copper 18 individual twisted pairs overall foil | |
Shielding | aluminum/poly foil 100% coverage 24 AWG 7/32 T.C. DW. | |
Data for application in connection with hazardous areas | ||
Directive conformity | UL/cULus RoHS compliant |
Electrical specifications | ||
---|---|---|
Rated voltage | 300 V AC/DC | |
Ambient conditions | ||
Ambient temperature | -20 ... 80 °C (-4 ... 176 °F) | |
Mechanical specifications | ||
Connection | 37 pins/32 pins | |
Material | ||
Connector | plastic/plastic | |
Cable | 22 AWG | |
Construction type | 22 AWG 7/0096 tinned copper 18 individual twisted pairs overall foil | |
Shielding | aluminum/poly foil 100% coverage 24 AWG 7/32 T.C. DW. | |
Data for application in connection with hazardous areas | ||
Directive conformity | UL/cULus RoHS compliant |
Electrical specifications | ||
---|---|---|
Rated voltage | 30 V | |
Standard conformity | ||
Flammability | IEC 60332-1-2 , flame-resistant | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) , fixed | |
Mechanical specifications | ||
Connection | Sub-D plug , 37 pins/37 pins IDC plug, 16-pin, 20-pin and 24-pin | |
Material | ||
Connector | Zinc die cast, nickel plated | |
Sheathing | PVC | |
Core insolation | PVC | |
Cable | LiYCY | |
Diameter | 18 cores: 7.3 mm (0.29 inch) | |
Bending radius | min. 6 x external diameter, fixed cable | |
Cores | 18 x 0.14 mm2 | |
Conductor construction | stranded wire , fine-strand | |
Shield | Tinned copper braiding |
Electrical specifications | ||
---|---|---|
Rated voltage | 30 V | |
Standard conformity | ||
Flammability | IEC 60332-1-2 , flame-resistant | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) , fixed | |
Mechanical specifications | ||
Connection | Sub-D plug , 37 pins/37 pins | |
Material | ||
Connector | Zinc die cast, nickel plated | |
Sheathing | PVC | |
Core insolation | PVC | |
Cable | LiYCY | |
Diameter | 18 cores: 10.2 mm (0.40 inch) 36 cores: 13.4 mm (0.53 inch) | |
Bending radius | min. 6 x external diameter, fixed cable | |
Cores | 18 x 0.34 mm2 36 x 0.34 mm2 | |
Conductor construction | stranded wire , fine-strand | |
Shield | Tinned copper braiding |
Ambient conditions | ||
---|---|---|
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
Mechanical specifications | ||
Mass | approx. 50 g | |
Dimensions | 43.5 x 45 x 114 mm (1.71 x 1.77 x 4.48 inch) |
Описание оборудования | ||
---|---|---|
Placeholder for HiC type isoators |
Описание оборудования | ||
---|---|---|
Placeholder for HiD type isoators |
General specifications | ||
---|---|---|
Type | resistance thermometer (RTD) Pt100 | |
Electrical specifications | ||
Resistor | 100 &Omega | |
Mechanical specifications | ||
Mass | approx. 20 g | |
Dimensions | 8.3 x 9.7 x 4.3 mm (0.33 x 0.38 x 0.17 inch) |
General specifications | ||
---|---|---|
Type | resistance thermometer (RTD) Cu109 | |
Electrical specifications | ||
Resistor | 109 &Omega | |
Mechanical specifications | ||
Mass | approx. 3 g | |
Dimensions | 8.3 x 9.7 x 4.3 mm (0.33 x 0.38 x 0.17 inch) |
General specifications | ||
---|---|---|
Type | resistance thermometer (RTD) Cu109 | |
Electrical specifications | ||
Resistor | 109 &Omega | |
Mechanical specifications | ||
Mass | approx. 3 g | |
Dimensions | 8.3 x 9.7 x 4.3 mm (0.33 x 0.38 x 0.17 inch) |
General specifications | ||
---|---|---|
Signal type | Universal | |
Supply | ||
Connection | SL1: 1a(-), 1b(-) 2a(+), 2b(+) | |
Rated voltage | 20.4 ... 30 V via Termination Board | |
Power dissipation | 0.2 W | |
Current | &le 75 mA (per channel) | |
Control circuit | ||
Connection | SL1: 8a(+), 7a(-) 10a(+), 9a(-) | |
Signal | 0 ... 20 mA 0 ... 5 V | |
Internal resistor | 250 &Omega via DIP switch and programmable | |
Field circuit | ||
Connection | terminals 1, 2, 3, 4 | |
Signal | 0 ... 20 mA | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Electromagnetic compatibility | For further information see system description. | |
Degree of protection | IEC 60529:2001 | |
Ambient conditions | ||
Ambient temperature | 0 ... 60 °C (32 ... 140 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Mass | approx. 140 g | |
Dimensions | 18 x 106 x 135 mm (0.7 x 4.2 x 5.3 inch) | |
Mounting | on Termination Board |
Supply | ||
---|---|---|
Connection | X20: terminals 1, 3 (+) 2, 4 (-) | |
Nominal voltage | 24 V DC SELV/PELV | |
Voltage drop | 0.9 V , voltage drop across the series diode on the termination board must be considered | |
Ripple | &le 10 % | |
Fusing | 0.5 A | |
Power dissipation | &le 500 mW , without modules | |
Reverse polarity protection | yes | |
Interface | ||
Type/number | 2 x RS-485 | |
Redundancy | ||
Supply | Redundancy available. Each supply is decoupled. | |
Indicators/settings | ||
Display elements | LED PWR1 (Termination Board power supply), green LED LED PWR2 (Termination Board power supply), green LED | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Electromagnetic compatibility | NE 21:2012 For further information see system description. | |
Degree of protection | IEC 60529:2001 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Connection | ||
Control side | RS-485 : 1 x screw terminal , black HART : 2 x IDC plug, 34-pin | |
Supply | pluggable screw terminals , black | |
Core cross-section | screw terminals: 0.25 ... 1.5 mm2 (24 ... 12 AWG) | |
Material | housing: polycarbonate, 10 % glass fiber reinforced | |
Mass | approx. 190 g | |
Dimensions | 50 x 200 x 163 mm (1.97 x 7.9 x 6.42 inch) , height including module assembly | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Supply | ||
---|---|---|
Connection | X20: terminals 1, 3 (+) 2, 4 (-) | |
Nominal voltage | 24 V DC SELV/PELV | |
Voltage drop | 0.9 V , voltage drop across the series diode on the termination board must be considered | |
Ripple | &le 10 % | |
Fusing | 0.5 A | |
Power dissipation | &le 500 mW , without modules | |
Reverse polarity protection | yes | |
Interface | ||
Type/number | 2 x RS-485 | |
Redundancy | ||
Supply | Redundancy available. Each supply is decoupled. | |
Indicators/settings | ||
Display elements | LED PWR1 (Termination Board power supply), green LED LED PWR2 (Termination Board power supply), green LED | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Electromagnetic compatibility | NE 21:2012 For further information see system description. | |
Degree of protection | IEC 60529:2001 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Connection | ||
Control side | RS-485 : 1 x screw terminal , black HART : 4 x IDC plug, 34-pin | |
Supply | pluggable screw terminals , black | |
Core cross-section | screw terminals: 0.25 ... 1.5 mm2 (24 ... 12 AWG) | |
Material | housing: polycarbonate, 10 % glass fiber reinforced | |
Mass | approx. 210 g | |
Dimensions | 50 x 200 x 163 mm (1.97 x 7.9 x 6.42 inch) , height including module assembly | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Supply | ||
---|---|---|
Connection | X20: terminals 1, 3 (+) 2, 4 (-) | |
Nominal voltage | 24 V DC SELV/PELV | |
Voltage drop | 0.9 V , voltage drop across the series diode on the termination board must be considered | |
Ripple | &le 10 % | |
Fusing | 0.5 A | |
Power dissipation | &le 500 mW , without modules | |
Reverse polarity protection | yes | |
Interface | ||
Type/number | 2 x RS-485 | |
Redundancy | ||
Supply | Redundancy available. Each supply is decoupled. | |
Indicators/settings | ||
Display elements | LED PWR1 (Termination Board power supply), green LED LED PWR2 (Termination Board power supply), green LED | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity | ||
Electromagnetic compatibility | NE 21:2012 For further information see system description. | |
Degree of protection | IEC 60529:2001 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Connection | ||
Control side | RS-485 : 1 x screw terminal , black HART : 4 x IDC plug, 34-pin | |
Supply | pluggable screw terminals , black | |
Core cross-section | screw terminals: 0.25 ... 1.5 mm2 (24 ... 12 AWG) | |
Material | housing: polycarbonate, 10 % glass fiber reinforced | |
Mass | approx. 210 g | |
Dimensions | 50 x 200 x 163 mm (1.97 x 7.9 x 6.42 inch) , height including module assembly | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Supply | ||
---|---|---|
Rated voltage | 20 ... 30 V DC | |
Fusing | 3.15 A , 5 x 20 mm (0.2 x 0.8 inch) | |
Power dissipation | 0.7 W , with Multiplexer | |
Reverse polarity protection | yes | |
HART signal channels (intrinsically safe) | ||
HART signal channels | ||
Number of channels | 32 unbalanced signal loops | |
Redundancy | ||
Supply | yes | |
Galvanic isolation | ||
HART signal channels | 30 V DC | |
Ambient conditions | ||
Ambient temperature | 0 ... 55 °C (32 ... 131 °F) | |
Relative humidity | 5 ... 90 %, non-condensing | |
Mechanical specifications | ||
Core cross-section | 2.5 mm2 (16 AWG) | |
Connection | field side: fixed screw terminals control side: PCS-specified connector RS 485 interface: removable screw terminals power: removable screw terminals | |
Mass | approx. 700 g | |
Dimensions | without HiDMux2700: 333 x 125 x 79 mm (13.1 x 4.9 x 3.1 inch) with Mux2700: 333 x 125 x 208 mm (13.1 x 4.9 x 8.2 inch) | |
Mounting | DIN rail mounting |
Supply | ||
---|---|---|
Rated voltage | 24 V DC | |
Fusing | 2 A , 5 x 20 mm (0.2 x 0.8 inch) | |
Power dissipation | 0.7 W , with Multiplexer | |
Reverse polarity protection | yes | |
HART signal channels (intrinsically safe) | ||
HART signal channels | ||
Number of channels | 64 unbalanced signal loops | |
Redundancy | ||
Supply | yes | |
Galvanic isolation | ||
HART signal channels | 30 V DC | |
Ambient conditions | ||
Ambient temperature | -20 ... 55 °C (-4 ... 131 °F) | |
Relative humidity | 5 ... 90 %, non-condensing | |
Mechanical specifications | ||
Core cross-section | 2.5 mm2 (16 AWG) | |
Connection | HART loop interface: connectors depending on version RS-485 interface: removable screw terminals power: removable screw terminals | |
Mass | approx. 500 g | |
Dimensions | without HiDMux2700: 152 x 121 x 53 mm (6 x 4.75 x 2.1 inch) with HiDMux2700: 152 x 121 x 142 mm (6 x 4.75 x 5.6 inch) | |
Mounting | DIN rail mounting |
Supply | ||
---|---|---|
Rated voltage | 20 ... 30 V DC | |
Fusing | 3.15 A , 5 x 20 mm (0.2 x 0.8 inch) | |
Power dissipation | 0.7 W , with Multiplexer | |
Reverse polarity protection | yes | |
HART signal channels (intrinsically safe) | ||
HART signal channels | ||
Number of channels | 32 unbalanced signal loops | |
Redundancy | ||
Supply | yes | |
Galvanic isolation | ||
HART signal channels | 30 V DC | |
Ambient conditions | ||
Ambient temperature | -20 ... 55 °C (-4 ... 131 °F) | |
Relative humidity | 5 ... 90 %, non-condensing | |
Mechanical specifications | ||
Core cross-section | 2.5 mm2 (16 AWG) | |
Connection | field side: fixed screw terminals control side: fixed screw terminals RS 485 interface: removable screw terminals power: removable screw terminals | |
Mass | approx. 500 g | |
Dimensions | without HiDMux2700: 222 x 122 x 79 mm (8.7 x 4.8 x 3.1 inch) with HiDMux2700: 222 x 122 x 208 mm (8.7 x 4.8 x 8.2 inch) | |
Mounting | DIN rail mounting |
Supply | ||
---|---|---|
Rated voltage | 20 ... 30 V DC | |
Fusing | 100 mA , 5 x 20 mm (0.2 x 0.8 inch) | |
Power dissipation | 0.7 W , with Multiplexer | |
Reverse polarity protection | yes | |
HART signal channels (intrinsically safe) | ||
HART signal channels | ||
Number of channels | 32 unbalanced signal loops | |
Redundancy | ||
Supply | yes | |
Galvanic isolation | ||
HART signal channels | 30 V DC | |
Ambient conditions | ||
Ambient temperature | -20 ... 55 °C (-4 ... 131 °F) | |
Relative humidity | 5 ... 90 %, non-condensing | |
Mechanical specifications | ||
Core cross-section | 2.5 mm2 (16 AWG) | |
Connection | field side: screw terminals control side: screw terminals/Sub-D socket 2 x 37-pin RS 485 interface: removable screw terminals power: removable screw terminals | |
Mass | approx. 700 g | |
Dimensions | without HiDMux2700: 300 x 127 x 72 mm (11.8 x 5 x 2.84 inch) with HiDMux2700: 300 x 127 x 186 mm (11.8 x 5 x 7.3 inch) | |
Mounting | DIN rail mounting |
Товаров: 0
На сумму: 0