Терминальные панели Pepperl+Fuchs

Терминальная панель Termination Board HiDTB16-TRI-AIISS-EL-PL Pepperl+Fuchs

Каталожный номер: 230420

Supply
Rated voltage		24 V DC , in consideration of rated voltage of used isolated barriers
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		&le 10 %
Fusing		4 A , in each case for 16 modules
Power dissipation		&le 500 mW , without modules
Reverse polarity protection		yes
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Indicators/settings
Display elements		LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2011 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		hazardous area connection (field side): pluggable screw terminals, blue safe area connection (control side): ELCO socket, 56-pin
Material		housing: polycarbonate, 30 % glass fiber reinforced
Mass		approx. 1600 g
Dimensions		300 x 200 x 163 mm (11.8 x 7.9 x 6.42 inch) , height including module assembly
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EC-Type Examination Certificate		CESI 11 ATEX 062
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Safe area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000
International approvals
CSA approval
	Control drawing	see control drawing of correspoding modules
IECEx approval		IECEx CES 11.0022
	Approved for	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I

Терминальная панель Termination Board HiDTB16-TRI-DIISD-EL-PL Pepperl+Fuchs

Каталожный номер: 224802

Supply
Rated voltage		24 V DC , in consideration of rated voltage of used isolated barriers
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		&le 10 %
Fusing		4 A , in each case for 16 modules
Power dissipation		&le 500 mW , without modules
Reverse polarity protection		yes
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Indicators/settings
Display elements		LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2011 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		hazardous area connection (field side): pluggable screw terminals, blue safe area connection (control side): ELCO socket, 56-pin
Material		housing: polycarbonate, 30 % glass fiber reinforced
Mass		approx. 1600 g
Dimensions		300 x 200 x 163 mm (11.8 x 7.9 x 6.42 inch) , height including module assembly
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EC-Type Examination Certificate		CESI 11 ATEX 062
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Safe area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000
International approvals
CSA approval
	Control drawing	see control drawing of correspoding modules
IECEx approval		IECEx CES 11.0022
	Approved for	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I

Терминальная панель Termination Board HiDTB16-TRI-DIISQ-EL-SC Pepperl+Fuchs

Каталожный номер: 227882

Supply
Rated voltage		24 V DC , in consideration of rated voltage of used isolated barriers
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		&le 10 %
Fusing		2 A , in each case for 8 modules
Power dissipation		&le 500 mW , without modules
Reverse polarity protection		yes
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Indicators/settings
Display elements		LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED
Configuration		jumper SW1/SW2: card selection - position 1: DI card 3564 - position 2: n.c. (factory setting) - position 3: DI card 3504E
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2011 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		hazardous area connection (field side): screw terminals, blue safe area connection (control side): ELCO socket, 56-pin
Material		housing: polycarbonate, 30 % glass fiber reinforced
Mass		approx. 600 g
Dimensions		300 x 200 x 163 mm (11.8 x 7.9 x 6.42 inch) , height including module assembly
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EC-Type Examination Certificate		CESI 11 ATEX 062
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Safe area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000
International approvals
CSA approval
	Control drawing	see control drawing of correspoding modules
IECEx approval		IECEx CES 11.0022
	Approved for	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I

Терминальная панель Termination Board HiDTB16-TRI-DOISD-EL-PL-Y2 Pepperl+Fuchs

Каталожный номер: 248354

Supply
Rated voltage		24 V DC , in consideration of rated voltage of used isolated barriers
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		&le 10 %
Fusing		4 A , in each case for 16 modules
Power dissipation		&le 500 mW , without modules
Reverse polarity protection		yes
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Indicators/settings
Display elements		LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2011 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		hazardous area connection (field side): pluggable screw terminals, blue safe area connection (control side): ELCO socket, 56-pin
Material		housing: polycarbonate, 30 % glass fiber reinforced
Mass		approx. 1600 g
Dimensions		300 x 200 x 163 mm (11.8 x 7.9 x 6.42 inch) , height including module assembly
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EC-Type Examination Certificate		CESI 11 ATEX 062
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Safe area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000
International approvals
CSA approval
	Control drawing	see control drawing of correspoding modules
IECEx approval		IECEx CES 11.0022
	Approved for	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I

Терминальная панель Termination Board HiDTB16-YC3-RRB-AK-CC-DX32 Pepperl+Fuchs

Каталожный номер: 236161

Supply
Rated voltage		24 V DC , in consideration of rated voltage of used isolated barriers
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		&le 10 %
Fusing		4 A , in each case for 32 modules
Power dissipation		&le 500 mW , without modules
Reverse polarity protection		yes
Electrical specifications
volt-free fault indication output		max. 30 V AC/40 V DC, 2 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Indicators/settings
Display elements		LEDs PWR ON (Termination Board power supply) - LED power supply I, green LED - LED power supply II, green LED LED FAULT (fault indication), red LED - LED lits: module failure - LED flashes: power supply failure
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2011 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		hazardous area connection (field side): spring terminals, blue safe area connection (control side): Yokogawa system connector, 50-pin
Core cross-section		spring terminals: rigid: 0.2 ... 2.5 mm² flexible: 0.25 ... 1.5 mm²
Material		housing: polycarbonate, 30 % glass fiber reinforced
Mass		approx. 860 g
Dimensions		310 x 175 x 153 mm (12.2 x 6.9 x 6.02 inch)
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EC-Type Examination Certificate		CESI 11 ATEX 062
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Safe area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-26:2007 , EN 50303:2000
International approvals
IECEx approval		IECEx CES 11.0022
	Approved for	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I

Терминальная панель Termination Board HiDTB16-YC3-RRB-KS-CC-AI16 Pepperl+Fuchs

Каталожный номер: 236166

Supply
Rated voltage		24 V DC , in consideration of rated voltage of used isolated barriers
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		&le 10 %
Fusing		4 A , in each case for 16 modules
Power dissipation		&le 500 mW , without modules
Reverse polarity protection		yes
Electrical specifications
volt-free fault indication output		max. 30 V AC/40 V DC, 2 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Indicators/settings
Display elements		LEDs PWR ON (Termination Board power supply) - LED power supply I, green LED - LED power supply II, green LED LED FAULT (fault indication), red LED - LED lits: module failure - LED flashes: power supply failure
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2011 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		hazardous area connection (field side): spring terminals, blue safe area connection (control side): Yokogawa system connector, 40-pin
Core cross-section		spring terminals: rigid: 0.2 ... 2.5 mm² flexible: 0.25 ... 1.5 mm²
Material		housing: polycarbonate, 30 % glass fiber reinforced
Mass		approx. 860 g
Dimensions		310 x 175 x 153 mm (12.2 x 6.9 x 6.02 inch)
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EC-Type Examination Certificate		CESI 11 ATEX 062
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Safe area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-26:2007 , EN 50303:2000
International approvals
IECEx approval		IECEx CES 11.0022
	Approved for	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I

Терминальная панель Termination Board HiSHPSM/32/TB-02 Pepperl+Fuchs

Каталожный номер: 475504

Supply
Rated voltage		20 ... 30 V DC
Fusing		100 mA , 5 x 20 mm (0.2 x 0.8 inch)
Power dissipation		0.7 W , with Multiplexer
Reverse polarity protection		yes
HART signal channels (intrinsically safe)
HART signal channels
	Number of channels	32 unbalanced signal loops
Redundancy
Supply		yes
Galvanic isolation
HART signal channels		30 V DC
Ambient conditions
Ambient temperature		-20 ... 55 °C (-4 ... 131 °F)
Relative humidity		5 ... 90 %, non-condensing
Mechanical specifications
Core cross-section		2.5 mm² (16 AWG)
Connection		field side: screw terminals control side: screw terminals/Sub-D socket 2 x 37-pin RS 485 interface: removable screw terminals power: removable screw terminals
Mass		approx. 700 g
Dimensions		without HiDMux2700: 300 x 127 x 72 mm (11.8 x 5 x 2.84 inch) with HiDMux2700: 300 x 127 x 186 mm (11.8 x 5 x 7.3 inch)
Mounting		DIN rail mounting

Терминальная панель Termination Board SC-GPCD-DI32-PF Pepperl+Fuchs

Каталожный номер: 209350

Supply
Connection		terminal block TB3 (1-, 2+ 3-, 4+)
Rated voltage		24 V DC , in consideration of rated voltage of used isolated barriers
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		&le 10 %
Fusing		4 A
Power dissipation		&le 500 mW , without modules
Reverse polarity protection		yes
Electrical specifications
volt-free fault indication output		max. 30 V AC/40 V DC, 2 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Indicators/settings
Display elements		LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED LED Fault (fault indication), green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		hazardous area connection (field side): pluggable screw terminals, blue safe area connection (control side): 37-pin Sub-D connector (male)
Core cross-section		0.2 ... 2.5 mm² (24 ... 12 AWG)
Material		housing: polycarbonate, 30 % glass fiber reinforced
Mass		approx. 900 g
Dimensions		273 x 155 x 153 mm (L x W x H) , height including module assembly
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EC-Type Examination Certificate		CESI 06 ATEX 022
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Safe area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000
International approvals
UL approval
	Control drawing	116-0327
IECEx approval		IECEx CES 06.0003
	Approved for	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I

Терминальная панель Termination Board SC-GPCS-UNI16-PF Pepperl+Fuchs

Каталожный номер: 209365

Supply
Connection		terminal block TB3 (1-, 2+ 3-, 4+)
Rated voltage		24 V DC , in consideration of rated voltage of used isolated barriers
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		&le 10 %
Fusing		4 A
Power dissipation		&le 500 mW , without modules
Reverse polarity protection		yes
Electrical specifications
volt-free fault indication output		max. 30 V AC/40 V DC, 2 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Indicators/settings
Display elements		LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED LED Fault (fault indication), green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		hazardous area connection (field side): pluggable screw terminals, blue safe area connection (control side): 37-pin Sub-D connector (male)
Core cross-section		0.2 ... 2.5 mm² (24 ... 12 AWG)
Material		housing: polycarbonate, 30 % glass fiber reinforced
Mass		approx. 900 g
Dimensions		273 x 155 x 153 mm (L x W x H) , height including module assembly
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EC-Type Examination Certificate		CESI 06 ATEX 022
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Safe area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000
International approvals
UL approval
	Control drawing	116-0327
IECEx approval		IECEx CES 06.0003
	Approved for	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I

Терминальная панель Termination Board SC-GPDD-AIO16-PF Pepperl+Fuchs

Каталожный номер: 209352

Supply
Connection		terminal block TB3 (1-, 2+ 3-, 4+)
Rated voltage		24 V DC , in consideration of rated voltage of used isolated barriers
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		&le 10 %
Fusing		2 A
Power dissipation		&le 500 mW , without modules
Reverse polarity protection		yes
Electrical specifications
volt-free fault indication output		max. 30 V AC/40 V DC, 2 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Indicators/settings
Display elements		LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED LED Fault (fault indication), green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		hazardous area connection (field side): pluggable screw terminals, blue safe area connection (control side): 37-pin Sub-D connector (male)
Core cross-section		0.2 ... 2.5 mm² (24 ... 12 AWG)
Material		housing: polycarbonate, 30 % glass fiber reinforced
Mass		approx. 500 g
Dimensions		201 x 155 x 153 mm (7.9 x 6.1 x 6.0 inch) , height including module assembly
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EC-Type Examination Certificate		CESI 11 ATEX 062
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Safe area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000
International approvals
CSA approval
	Control drawing	see control drawing of correspoding modules
IECEx approval		IECEx CES 11.0022
	Approved for	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I

Терминальная панель Termination Board SC-GPDD-DO32-PF Pepperl+Fuchs

Каталожный номер: 209349

Supply
Connection		terminal block TB3 (1-, 2+ 3-, 4+)
Rated voltage		24 V DC , in consideration of rated voltage of used isolated barriers
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		&le 10 %
Fusing		4 A
Power dissipation		&le 500 mW , without modules
Reverse polarity protection		yes
Electrical specifications
volt-free fault indication output		max. 30 V AC/40 V DC, 2 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Indicators/settings
Display elements		LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED LED Fault (fault indication), green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		hazardous area connection (field side): pluggable screw terminals, blue safe area connection (control side): 37-pin Sub-D connector (male)
Core cross-section		0.2 ... 2.5 mm² (24 ... 12 AWG)
Material		housing: polycarbonate, 30 % glass fiber reinforced
Mass		approx. 1000 g
Dimensions		357 x 155 x 153 mm (L x W x H) , height including module assembly
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EC-Type Examination Certificate		CESI 11 ATEX 062
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Safe area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000
International approvals
CSA approval
	Control drawing	see control drawing of correspoding modules
IECEx approval		IECEx CES 11.0022
	Approved for	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I

Терминальная панель Termination Board SC-GPDS-AIO16-PF Pepperl+Fuchs

Каталожный номер: 230227

Supply
Connection		terminal block TB3 (1-, 2+ 3-, 4+)
Rated voltage		24 V DC , in consideration of rated voltage of used isolated barriers
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		&le 10 %
Fusing		4 A
Power dissipation		&le 500 mW , without modules
Reverse polarity protection		yes
Electrical specifications
volt-free fault indication output		max. 30 V AC/40 V DC, 2 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Indicators/settings
Display elements		LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED LED Fault (fault indication), green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2012 For further information see system description.
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		hazardous area connection (field side): pluggable screw terminals, blue safe area connection (control side): 37-pin Sub-D connector (male)
Core cross-section		0.2 ... 2.5 mm² (24 ... 12 AWG)
Material		housing: polycarbonate, 30 % glass fiber reinforced
Mass		approx. 1000 g
Dimensions		357 x 155 x 153 mm (L x W x H) , height including module assembly
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EC-Type Examination Certificate		CESI 11 ATEX 062
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Safe area
	Maximum safe voltage	250 V (Attention! U_m is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000
International approvals
CSA approval
	Control drawing	see control drawing of correspoding modules
IECEx approval		IECEx CES 11.0022
	Approved for	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I

Терминальная панель Termination Board TB-C3-AI16-KS-132049 (9295) Pepperl+Fuchs

Каталожный номер: 132049

Supply
Rated voltage		24 V DC SELV/PELV
Fusing		T3A15
Electrical specifications
volt-free fault indication output		30 V DC, 1 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Терминальная панель Termination Board TB-C3-AI8-KS Pepperl+Fuchs

Каталожный номер: 188691

Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Терминальная панель Termination Board TB-C3-AIO16-KS-243011 Pepperl+Fuchs

Каталожный номер: 243011

Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Терминальная панель Termination Board TB-C3-AIO16-KS1-182610 (9295) Pepperl+Fuchs

Каталожный номер: 182610

Supply
Rated voltage		24 V DC SELV/PELV
Fusing		T3A15
Electrical specifications
volt-free fault indication output		30 V DC, 1 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Терминальная панель Termination Board TB-C3-AIO8-KS Pepperl+Fuchs

Каталожный номер: 188685

Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Терминальная панель Termination Board TB-C3-DI32-AKB-Y188683 Pepperl+Fuchs

Каталожный номер: 188683

Supply
Rated voltage		24 V DC SELV/PELV
Rated current		&le 100 mA per channel , total current consumption depends on number and type of devices
Fusing		T2A
Electrical specifications
volt-free fault indication output		30 V DC, 1 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Терминальная панель Termination Board TB-C3-DO32-AKB-Y188682 Pepperl+Fuchs

Каталожный номер: 188682

Supply
Rated voltage		24 V DC SELV/PELV
Fusing		T2A
Electrical specifications
volt-free fault indication output		30 V DC, 1 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Терминальная панель Termination Board TB-RS-AI16-KS-186102 Pepperl+Fuchs

Каталожный номер: 186102

Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Терминальная панель Termination Board TB-RS-AI16V-KS Pepperl+Fuchs

Каталожный номер: 183383

Supply
Rated voltage		24 V DC
Fusing		T2A
Electrical specifications
volt-free fault indication output		max. 30 V AC/40 V DC, 2 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Терминальная панель Termination Board TB-RS-DI16-AKB-185847 Pepperl+Fuchs

Каталожный номер: 185847

Supply
Rated voltage		24 V DC SELV/PELV
Fusing		T2A
Electrical specifications
volt-free fault indication output		max. 30 V AC/40 V DC, 2 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Терминальная панель Termination Board TB-RS-DO16-AKB-204061 Pepperl+Fuchs

Каталожный номер: 204061

Supply
Rated voltage		24 V DC SELV/PELV
Rated current		&le 0.6 A per channel , total current consumption depends on number and type of devices
Fusing		6.3 A
Electrical specifications
volt-free fault indication output		max. 30 V AC/40 V DC, 2 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Терминальная панель Termination Board TB-RS-DO8-AKB Pepperl+Fuchs

Каталожный номер: 185849

Supply
Rated voltage		24 V DC
Rated current		&le 0.6 A
Fusing		6.3 A
Electrical specifications
volt-free fault indication output		max. 30 V AC/40 V DC, 2 A
Redundancy
Supply		Redundancy available. The supply for the modules is decoupled, monitored and fused.
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Терминальная панель Termination Board TB-UNI-AKB Pepperl+Fuchs

Каталожный номер: 188667

Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-15 ... 50 °C (5 ... 122 °F)
Storage temperature		-15 ... 55 °C (5 ... 131 °F)
Relative humidity		&le 95 % , non-condensing
Shock resistance		1 g , 16 ms (all space directions)
Vibration resistance		< 15 Hz, amplitude ± 2.5 mm/15 Hz
Mechanical specifications
Degree of protection		IP20

Клиенты

Блог

Атол 30Ф не включается (заводской брак)

Citizen CLP-521 - принтер плохо печатает этикетки (диагностика и ремонт)

Атол 77Ф, отключаем датчики бумаги

PRO CS-80 неправильно сортирует (считает) монеты

Как узнать дату изготовления весов CAS

Подписка

Последнее на форуме