Атол 30Ф не включается (заводской брак)
Валерий
14 января 2022
General specifications | ||
---|---|---|
Detection type | photoelectric sampling | |
Device type | Singleturn absolute encoder | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC | |
No-load supply current | max. 190 mA | |
Linearity | ± 1 LSB | |
Output code | binary code | |
Code course (counting direction) | programmable, cw ascending (clockwise rotation, code course ascending) cw descending (clockwise rotation, code course descending) | |
Interface | ||
Interface type | PROFIBUS | |
Resolution | ||
Single turn | 13 Bit | |
Transfer rate | 0.0096 ... 12 MBit/s | |
Standard conformity | PNO profile 3.062 | |
Connection | ||
Cable | &empty11.2 mm, 9-core, 2 m | |
Standard conformity | ||
Degree of protection | DIN EN 60529, IP66 | |
Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
Emitted interference | EN 61000-6-4:2007 | |
Noise immunity | EN 61000-6-2:2005 | |
Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | |
Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz | |
Ambient conditions | ||
Operating temperature | ||
Gas Ex-area | -40 ... 55 °C (-40 ... 131 °F) | |
Dust Ex-area | -30 ... 55 °C (-22 ... 131 °F) | |
Storage temperature | ||
Gas Ex-area | -40 ... 70 °C (-40 ... 158 °F) | |
Dust Ex-area | -30 ... 70 °C (-22 ... 158 °F) | |
Mechanical specifications | ||
Material | ||
Housing | aluminum | |
Flange | aluminum | |
Shaft | Stainless steel | |
Mass | approx. 3400 g | |
Rotational speed | max. 6000 min -1 | |
Moment of inertia | 400 gcm2 | |
Starting torque | &le 5 Ncm | |
Shaft load | ||
Axial | 60 N | |
Radial | 80 N | |
Data for application in connection with hazardous areas | ||
EC-Type Examination Certificate | ZELM 02 ATEX 0078 X | |
Group, category, type of protection | II 2G Ex db IIC T6 Gb II 2D Ex tb IIIC T80°C Db IP66 | |
Directive conformity | ||
Directive 94/9/EC | EN 60079-0:2012 EN 60079-1:2007 EN 60079-31:2009 |
General specifications | ||
---|---|---|
Detection type | photoelectric sampling | |
Device type | Singleturn absolute encoder | |
Functional safety related parameters | ||
MTTFd | 80 a | |
Mission Time (TM) | 20 a | |
L10h | 1.9 E+11 at 6000 rpm and 20/40 N axial/radial shaft load | |
Diagnostic Coverage (DC) | 0 % | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC | |
No-load supply current | max. 230 mA at 10 V DC max. 100 mA at 24 V DC | |
Power consumption | max. 2.5 W | |
Time delay before availability | < 1000 ms | |
Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit | |
Output code | binary code | |
Code course (counting direction) | programmable, cw ascending (clockwise rotation, code course ascending) cw descending (clockwise rotation, code course descending) | |
Interface | ||
Interface type | PROFIBUS | |
Resolution | ||
Single turn | up to 16 Bit | |
Overall resolution | up to 16 Bit | |
Transfer rate | 0.0096 ... 12 MBit/s | |
Standard conformity | PNO profile 3.062, RS-485 | |
Connection | ||
Terminal compartment | in removable housing cover | |
Standard conformity | ||
Degree of protection | DIN EN 60529, IP65 IP66 (with shaft seal) | |
Climatic testing | DIN EN 60068-2-30 , no moisture condensation | |
Emitted interference | EN 61000-6-4:2007 | |
Noise immunity | EN 61000-6-2:2005 | |
Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms | |
Vibration resistance | DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
Ambient conditions | ||
Operating temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Material | ||
Combination 1 | housing: powder coated aluminum flange: aluminum shaft: stainless steel | |
Combination 2 (Inox) | housing: stainless steel flange: stainless steel shaft: stainless steel | |
Mass | approx. 550 g (combination 1) approx. 1100 g (combination 2) | |
Rotational speed | max. 12000 min -1 | |
Moment of inertia | 30 gcm2 | |
Starting torque | &le 3 Ncm (version without shaft seal) | |
Shaft load | ||
Axial | 40 N | |
Radial | 110 N |
General specifications | ||
---|---|---|
Detection type | photoelectric sampling | |
Device type | Singleturn absolute encoder | |
Functional safety related parameters | ||
MTTFd | 80 a | |
Mission Time (TM) | 20 a | |
L10h | 1.9 E+11 at 6000 rpm and 20/40 N axial/radial shaft load | |
Diagnostic Coverage (DC) | 0 % | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC | |
Current consumption | max. 230 mA at 10 V DC, max. 100 mA at 24 V DC | |
Time delay before availability | < 1000 ms | |
Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit | |
Output code | binary code | |
Code course (counting direction) | programmable, cw ascending (clockwise rotation, code course ascending) cw descending (clockwise rotation, code course descending) | |
Interface | ||
Interface type | PROFIBUS | |
Resolution | ||
Single turn | up to 16 Bit | |
Overall resolution | up to 16 Bit | |
Transfer rate | 0.0096 ... 12 MBit/s | |
Standard conformity | PNO profile 3.062, RS-485 | |
Connection | ||
Terminal compartment | in removable housing cover | |
Standard conformity | ||
Degree of protection | DIN EN 60529, shaft side: IP64 (without shaft seal)/IP66 (with shaft seal) housing side: IP65 | |
Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
Emitted interference | EN 61000-6-4:2007 | |
Noise immunity | EN 61000-6-2:2005 | |
Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms | |
Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
Ambient conditions | ||
Operating temperature | -30 ... 55 °C (-22 ... 131 °F) | |
Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
Mechanical specifications | ||
Material | ||
Combination 1 | housing: powder coated aluminum flange: aluminum shaft: stainless steel | |
Mass | approx. 550 g (combination 1) | |
Rotational speed | max. 6000 min -1 | |
Moment of inertia | 30 gcm2 | |
Starting torque | &le 3 Ncm (version without shaft seal) | |
Shaft load | ||
Axial | 40 N | |
Radial | 110 N | |
Data for application in connection with hazardous areas | ||
EC-Type Examination Certificate | ||
Group, category, type of protection | II 3G Ex nA IIB T4 Gc II 3D Ex tc IIIC T120°C Dc IP64 | |
Directive conformity | ||
Directive 94/9/EC | EN 60079-0:2012 , EN 60079-15:2010 , EN 60079-31:2009 |
General specifications | ||
---|---|---|
Detection type | photoelectric sampling | |
Device type | Singleturn absolute encoder | |
Functional safety related parameters | ||
MTTFd | 25 a | |
Mission Time (TM) | 20 a | |
L10h | 7.7 E+9 at 3000 rpm | |
Diagnostic Coverage (DC) | 0 % | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC | |
No-load supply current | max. 230 mA at 10 V DC max. 100 mA at 24 V DC | |
Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit | |
Output code | binary code | |
Code course (counting direction) | programmable, cw ascending (clockwise rotation, code course ascending) cw descending (clockwise rotation, code course descending) | |
Interface | ||
Interface type | PROFIBUS | |
Resolution | ||
Single turn | up to 16 Bit | |
Transfer rate | 0.0096 ... 12 MBit/s | |
Standard conformity | PNO profile 3.062, RS-485 | |
Connection | ||
Cable | &empty9.6 mm, 7-core | |
Terminal compartment | see ordering information | |
Standard conformity | ||
Degree of protection | DIN EN 60529, IP66 | |
Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
Emitted interference | EN 61000-6-4:2007 | |
Noise immunity | EN 61000-6-2:2005 | |
Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | |
Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz | |
Ambient conditions | ||
Operating temperature | -40 ... 70 °C (-40 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Material | ||
Combination 1 | housing: Stainless steel 1.4305 / AISI 303 flange: Stainless steel 1.4305 / AISI 303 shaft: Stainless steel 1.4401 / AISI 316 | |
Combination 2 (Inox) | housing: stainless steel 1.4404 / AISI 316L flange: stainless steel 1.4404 / AISI 316L shaft: Stainless steel 1.4401 / AISI 316 | |
Mass | approx. 2600 g (combination 1) approx. 3900 g (combination 2) | |
Rotational speed | max. 3000 min -1 | |
Moment of inertia | 180 gcm2 | |
Starting torque | &le 4 Ncm | |
Shaft load | ||
Axial | 60 N | |
Radial | 80 N | |
Data for application in connection with hazardous areas | ||
EC-Type Examination Certificate | ITS 15 ATEX 18371X IECEx ITS 11.0060X | |
Group, category, type of protection | I M2 Ex db I/IIC T5 II 2G Ex d IIC T5 Gb II 2D Ex tb IIIC T100°C Db | |
Directive conformity | ||
Directive 94/9/EC | IEC 60079-0:2011 EN 60079-0:2012+A11:2013 IEC 60079-1:2014 EN 60079-1:2014 IEC 60079-31:2013 EN 60079-31:2014 |
General specifications | ||
---|---|---|
Detection type | photoelectric sampling | |
Device type | Singleturn absolute encoder | |
Functional safety related parameters | ||
MTTFd | 25 a | |
Mission Time (TM) | 20 a | |
L10h | 7.7 E+9 at 3000 rpm | |
Diagnostic Coverage (DC) | 0 % | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC | |
No-load supply current | max. 230 mA at 10 V DC max. 100 mA at 24 V DC | |
Linearity | ± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit | |
Output code | binary code | |
Code course (counting direction) | programmable, cw ascending (clockwise rotation, code course ascending) cw descending (clockwise rotation, code course descending) | |
Interface | ||
Interface type | PROFIBUS | |
Resolution | ||
Single turn | up to 16 Bit | |
Transfer rate | 0.0096 ... 12 MBit/s | |
Standard conformity | PNO profile 3.062, RS-485 | |
Connection | ||
Cable | &empty9.6 mm, 7-core | |
Terminal compartment | see ordering information | |
Standard conformity | ||
Degree of protection | DIN EN 60529, IP66 | |
Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
Emitted interference | EN 61000-6-4:2007 | |
Noise immunity | EN 61000-6-2:2005 | |
Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | |
Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz | |
Ambient conditions | ||
Operating temperature | -40 ... 70 °C (-40 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Material | ||
Combination 1 | housing: anodized aluminum flange: aluminum, blank shaft: Stainless steel 1.4401 / AISI 316 | |
Combination 2 (Inox) | housing: stainless steel 1.4404 / AISI 316L flange: stainless steel 1.4404 / AISI 316L shaft: Stainless steel 1.4401 / AISI 316 | |
Mass | approx. 2600 g (combination 1) approx. 3900 g (combination 2) | |
Rotational speed | max. 3000 min -1 | |
Moment of inertia | 180 gcm2 | |
Starting torque | &le 4 Ncm | |
Shaft load | ||
Axial | 60 N | |
Radial | 80 N | |
Data for application in connection with hazardous areas | ||
EC-Type Examination Certificate | ITS 15 ATEX 18372X IECEx ITS 15.0061X | |
Group, category, type of protection | II 2G Ex d IIC T5 Gb II 2D Ex tb IIIC T100°C Db | |
Directive conformity | ||
Directive 94/9/EC | IEC 60079-0:2011 EN 60079-0:2012+A11:2013 IEC 60079-1:2014 EN 60079-1:2014 IEC 60079-31:2013 EN 60079-31:2014 |
Описание оборудования | ||
---|---|---|
Cable pull |
Описание оборудования | ||
---|---|---|
Cable pull |
Описание оборудования | ||
---|---|---|
Cable pull |
Описание оборудования | ||
---|---|---|
Cable pull |
Описание оборудования | ||
---|---|---|
Cable pull rotary encoder with analog interface |
Описание оборудования | ||
---|---|---|
Cable pull rotary encoder with EtherCAT interface |
Описание оборудования | ||
---|---|---|
Cable pull rotary encoder with PROFINET interface |
Описание оборудования | ||
---|---|---|
Cable pull rotary encoder with SSI interface |
Описание оборудования | ||
---|---|---|
Cable pull rotary encoder with PROFINET interface |
Описание оборудования | ||
---|---|---|
Cable pull rotary encoder with SSI interface |
Описание оборудования | ||
---|---|---|
Cable pull |
Товаров: 0
На сумму: 0